user manual

D-2
Troubleshooting the MVME187: Solving Startup Problems
D
II. There is a
display on the
terminal, but
input from the
keyboard has no
effect.
A. The
keyboard may
be connected
incorrectly.
Recheck the keyboard connections and power.
B. Board
jumpers may be
conÞgured
incorrectly.
Check the board jumpers per this manual.
C. You may have
invoked ßow
control by
pressing a HOLD
or PAUSE key, or
by typing
^S
Also, a HOLD
LED may be lit
on the keyboard.
Press the HOLD or PAUSE key again.
If this does not free up the keyboard, type in
^Q
(Hold down the CONTROL key and type a ÒQÓ)
Table D-1. Troubleshooting Steps (Continued)
Condition
Possible
Problem
Try This: