user manual

Levels of Implementation
E-3
E
Levels of Implementation
There are several levels of conformance that may be appropriate for
typical EIA-232-D interconnections. The bare minimum
requirement is the two data lines and a ground. The full
implementation of EIA-232-D requires 12 lines; it accommodates:
❏ Automatic dialing
❏ Automatic answering
❏ Synchronous transmission
A middle-of-the-road approach is illustrated in Figure E-1.
22 RI RING INDICATOR. Output from the modem to the terminal;
indicates to the terminal that an incoming call is present. The
terminal causes the modem to answer the phone by carrying
DTR true while RI is active.
23 Not used.
24 TxC TRANSMIT CLOCK (DTE). Input to modem from terminal;
same function as TxC on pin 15.
25 BSY BUSY. Input to modem from terminal. A positive EIA signal
applied to this pin causes the modem to go off-hook and make
the associated phone busy.
Table E-1. EIA-232-D Interconnections (Continued)
Pin
Number
Signal
Mnemonic
Signal Name and Description