user manual

IN-11
I
N
D
E
X
D
Dallas DS1210S 2-14
data and address
parameter numeric format 1-2
size definitions 1-3
data bus structure 2-12
data circuit-terminating equipment
(DCE) E-1
data terminal equipment (DTE) E-1
DCE (data circuit-terminating equip-
ment) E-1
debug monitor 3-14
see also 187Bug and MVME187Bug
debug port 5-7
debugger 3-9
commands 5-15
directories 4-3
general information 4-1
prompt 5-1
setup/operation parameters stored
in ROM 3-9
decimal number 1-2
default
187Bug controller and device param-
eters 4-17
baud rate 3-21
delimiter 5-4
description of 187Bug 4-2
device
descriptor table 4-15
LUN (DLUN) B-2, C-1
probe function 4-14
diagnostic directories 4-3
diagnostic facilities 4-25
diagnostics
monitor commands/prefixes 4-25
utilities 4-26
direct access device B-2, B-3
disk
I/O
error codes 4-18
support 4-13
via 187Bug commands 4-15
via 187Bug system calls 4-16
support facilities 4-13
disk/tape
controller
default configurations B-2
controller modules B-1
diskless client 4-20
diskless remote node 4-19
display of memory 4-2
DLUN (device LUN) B-2, C-1
document set for MVME187-0xx board
1-5
documentation
available non-Motorola publications
bundle 1-7
double precision real 5-13
downloading an S-record object file 5-8
DRAM (dynamic RAM) 2-15
addressing 3-27
base address 3-27
mezzanine boards 2-2
mixed parity 2-16
programming considerations 2-16
DTE (data terminal equipment) E-1
dynamic RAM (DRAM) 2-15
E
EIA-232-D 2-3, 2-19
interconnections E-1, E-2
middle-of-the-road configuration
E-5
minimum connection E-6
port(s) 3-21, 5-11
standard E-1
entering and debugging programs 5-8
entering debugger command lines 5-1
ENV command parameters A-4
Environment (ENV) and Configure (CN-
FG) commands A-1