user manual

IN-17
I
N
D
E
X
T
terminal input/output control 4-13, 5-1
terminal(s) E-1
TFTP protocol module 4-20
tick timers 2-23
timeout 2-23
tracing capabilities 4-2
transfer type (TT) 2-24
transition boards supported by
MVME187 2-8
transition module installation 3-20
translation table 5-10
translation through the Memory Man-
agement Units (MMUs) 5-10
TRAP #496 4-16, 5-9
calls, and default controller address-
es B-1
function ".RETURN" 5-2
trap exception commands 4-2
Trivial File Transfer Protocol (TFTP) 4-20
troubleshooting steps D-1
true/false bit state definitions 1-4
TRXC4 (Transmit Receive Clock 4) 3-11,
3-14
TT (transfer type) 2-24
two-byte 1-3
U
UDP/IP protocol modules 4-19
unpacking instructions 3-1
unusable debugger and small-endian
byte ordering 1-3
user address space 5-6
User Datagram Protocol 4-19
user-customized environments D-1
using local SRAM for work space J6 3-9
using the 187Bug debugger 5-1
V
vector table 5-10
verify the NVRAM (BBRAM) parameters
3-25
vertical bar 5-3
VME LED 2-11
VMEbus
accesses to the local bus 2-28
interface 2-18
memory map 2-28
short I/O memory map 2-28
short I/O space 4-24
specification 1-9
VMEchip2
ASIC 2-9
LCSR (Local Control and Status Reg-
isters) 3-8
LM/SIG register 4-24
W
watchdog timer 2-23
whoami packet 4-20
Winchester hard drive B-2
work page 3-9
write files from/to a remote server 4-20
X
XON/XOFF 3-22