user manual

Overview of Startup Procedure
3-3
3
4 Install adapter boards and transition modules. Transition
Modules and
Adapter Boards
Overview
3-17
Installing
Transition
Modules and
Adapter Boards
3-20
Set jumpers on the transition module(s). The userÕs manual you
received with your
MVME712X
Connect and install the MVME712X
transition module.
Connect and install the P2 adapter board.
5 Connect peripherals. Connecting
Peripherals
3-20
Connect and install any optional SCSI
device cables.
You may also wish to
obtain the Single Board
Computer SCSI Software
UserÕs Manual
Connect a console terminal to the
MVME712X.
Connect any other optional devices or
equipment you will be using, such as
serial or parallel printers, host computers,
etc.
EIA-232-D
Interconnections
E-1
Port Numbers 5-7
Disk/Tape
Controller Data
B-1
6 Complete the installation. The userÕs
manual you
received with
your chassis
3-24
Reassemble chassis.
Reconnect AC power.
Table 3-1. Startup Overview (Continued)
Stage What you will need to do... Refer to...
On
page...