Motorola D1100 Series For D1101, D1102, D1103 and D1104 Digital Cordless Phone Warning Use only rechargeable batteries. Charge the handset for 24 hours before use.
Welcome... EN to your new Motorola D1100 Digital Cordless Phone! • Wall mountable freedom base – all handsets fully cordless for locating anywhere within range. • 1.6” colour display. • 100 Name and number phonebook. • Copy phonebook entries between other handsets. • Screensaver clock display. 1 You must subscribe to your network provider’s Caller Display or Call Waiting service for these features to work. A quarterly fee may be payable.
1. 2. 3. 4.
EN 1. Getting started WHICH POWER ADAPTOR? WARNING Do not place your D1100 in the bathroom or other humid areas. The power adaptor with a clear connector is for the base unit and the power adaptor with a red colour connector is for the charger unit. Location Connecting up the large base You need to place your D1100 base within 2 metres of the mains power socket and telephone socket so that the cables will reach. IMPORTANT Warning! Use only rechargeable batteries.
Setting up your D1100 Welcome screen 1. The Welcome screen will briefly appear, then a list of countries is displayed. 2. Scroll u or d to your country (operator) and press Select . The handset and base will reset to load the correct settings. The standby screen is then displayed and your phone is ready to use. 2.
EN Handset Display Range indicator Battery status Scrolls when charging The approximate power levels of your battery are indicated as below: Flashes when out of range or not registered Battery is fully charged. Each menu has a list of options, which you can see on the menu map on the following page. Battery is partially charged. When the handset is switched on and in standby: Battery is running low. 1. Press Menu to open the main menu. 2.
Menu map Calls Lists Reminder Clock & Alarm Settings Registration Extra Names Press Names during a call: Missed Calls If there is an Event, the following options will be displayed. Date & Time Set Handset Register Handset Room Monitor Received Calls Alarm Ringtone Select Base From menu in standby: Phonebook list is displayed.
EN Character map Key Case 1 2 L/U* 3 4 5 6 7 8 9 0 * # Assigned characters and symbols . , - ? ! ¡ ¿ ' L a b c U A B C 2 Ä Æ Å Ç L d e f U D E F 3 É L g h i 4 ì U G H I 4 L j k l 5 U J K L 5 L m n o 6 ö ø ò ñ U M N O 6 Ö Ø Ñ L p U P Q R S 7 Ş L t U T U V 8 Ü Û L w x y z U W X Y Z 9 L/U q r u @ : ; / 1 2 ä æ å à ç 3 è é s 3.
Internal calls Call another handset If you have more than one handset registered to the base, you can make internal calls between two handsets. 1. Press I then the number (1-5) of the handset you want to call. 2. Press OK to dial. When an internal call is received, the display shows Internal Call Handset X (where X is the calling handset) and the handset number. Transfer a call You can transfer an external call to another handset registered to the base. During your call: 1.
EN When storing a name the first character is upper case and the rest lower case. To change the case manually, Press #. To store a Pause in the number field, press and hold u. To store a Recall in the number field, press R. 4. Enter the number and press Save . 5. Scroll u or d to the ringtone you want and press Select. The display shows Saved and returns to the phonebook menu. 6. Press Back to return to the previous menu level or > to return to standby.
4. Handset settings Handset ringtone You can set different ringtones for external calls and internal calls. Select from 10 handset ringtones. You will hear a sample ring for each one you highlight. Press Menu, scroll d to Settings and press Select. Set Handset is highlighted. Press Select. Ringtone is highlighted. Press Select. Press u or d to highlight External Call or Internal Call. Press Select to confirm. 5. Scroll u or d to highlight the ringtone you want. 6. Press Select to confirm. 7.
EN Key beep When you press a button on the D1100 handset you hear a beep. You can switch this on or off. 1. 2. 3. 4. 5. Press Menu, scroll d to Settings and press Select . Set Handset is highlighted. Press Select. Scroll d to Key Beep and press Select . Scroll u or d to Off or On then press Select. Press Back to return to the previous menu level or > to return to standby.
6. Re-enter the new PIN and press OK . 7. Press Back to return to the previous menu level or > to return to standby. Restore default settings You can restore your D1100 to its default (original) settings. It will not affect the phonebook, calls list or user’s data. All handsets registered to the base will be retained. All handset and base settings will be reset. 1. 2. 3. 4. 5. Press Menu, scroll d to Settings and press Select. Scroll d to Set Base and press Select .
EN Switch off alarm ring When the alarm goes off, press Stop. If you are using the handset to make a call when the alarm ring is due, the flashes and you hear a beep in the earpiece. Time format Set the time format to 12 or 24 hour setting. 1. 2. 3. 4. Press Menu, scroll d to Clock & Alarm and press Select . Scroll d to Time Format and press Select . Press u or d to select 12 Hour or 24 Hour and press Select . Press Back to return to the previous menu level. 7.
8. Calls lists IMPORTANT To use Caller Display you must first subscribe to the service from your network provider. A quarterly fee may be payable. To ensure the caller's name is displayed, make sure you have stored the full telephone number, including the dialling code in the phonebook. If the caller’s number is stored in the phonebook, the name assigned to it is displayed. If the number is unavailable, Unavailable will be displayed.
EN 9. Call Waiting 11. Room Monitor NOTE You must subscribe to your network’s Caller Display service for Call Waiting to work. A quarterly fee may be payable. You can use your D1100 handset to monitor the sounds in another room. If the sounds reach a certain level the handset will automatically dial out to a preset external number or to another handset.
12. Using additional handsets You can use up to five D1100 additional handsets with your D1100 base to extend your phone system without needing to install extension sockets for each new phone. Your D1100 handset can also be registered to up to 3 other bases. You can then select the base you would prefer to use. If you have purchased a D1100 multiple pack any additional handsets come pre-registered to the base.
EN You hear the busy tone when you press <. • Make sure the handset is in range of the base. • Another handset registered to your D1100 base may be on the line. No Caller Display number/name displayed • Have you subscribed to a Caller Display service from your network provider? See page 15. • The caller may have withheld their number. • An exact name/number match was not found in your directory. Check that you have stored the full STD dialling code.
Cleaning • Clean the handset and base (or charger) with a damp (not wet) cloth, or an anti-static wipe. • Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock. Environmental • Do not expose to direct sunlight. • The handset may become warm when the batteries are being charged or during prolonged periods of use. This is normal. However, we recommend that to avoid damage you do not place the product on antique/veneered wood.
EN Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
• To wall-mount the charger, drill two holes in the wall 3.2cm apart horizontally using an 8mm drill bit. 2. Insert the wall plugs if necessary, then insert the screws leaving about 5mm protruding from the wall on which to hang the phone. 3. Pull the base/charger out of the stand and slot the holes on the back of the base over the screw heads and gently pull the base/charger down to make sure it is securely in place.
Declaration of Conformity (DoC) Suncorp declares that the following products: Brandname: Type: Descriptions: Motorola D1101, D1102, D1103, D1104, D1111, D1112, D1113 and D1114 DECT phone with telephone answering machine (D110x) and without telephone answering machine (D111x), and their multi-handset versions.
Manufactured, distributed or sold by Suncorp Technologies Ltd. official licensee for this product. MOTOROLA and the Stylized M Logo, and other Motorola trademarks and trade dress are owned by Motorola, Inc. and are used under license from Motorola, Inc. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2010. All rights reserved.
