Operation Manual
14
English
RECORD
: Record your own outgoing message after the
announcement "Please speak after the tone". To stop, press
. When you are finished, press .
DEFAULT
: Remove any used recorded outgoing message, and
set the active message back to the default setting. Press
to confirm.
Ring delay
The ring delay is the number of rings after which your
answering machine will take an incoming call and play your
outgoing message. You can select from 2 to 9 rings or Toll
Saver mode.
Toll Saver mode (economy setting)
Toll saver can save you the cost of a call when you ring in to
access your messages remotely (see page 16 for remote
operation). If your answering machine answers after 3 rings
then you have new messages. If it answers after 7 rings then
there are no new messages. This means that you can hang up
after 3 rings knowing you have no new messages and save
yourself the cost of the call.
1.
Press to access the main menu.
2.
Press or to select "
TAM
" and press .
3.
Press or to select "
TAM SETTINGS
" and press .
4.
Press or to select "
SET RINGS
" and press .
5.
Press or to select from 2-9 rings or "
TOLL SAVER
" and
press .
Record a memo
You can use your phone to record a memo message/reminder
for another user of your phone. The memo can be up to 3
minutes long and can be played back with your answering
machine messages. You can only store one memo at a time.
1.
Press to access the main menu.
2.
Press or to select "
TAM
" and press .
3.
Press or to select "
MEMO
" and press .
4.
After the announcement "Please leave your message after
the tone", speak your message clearly into the handset
microphone. While recording memo, "
RECORDING
" appears.
To stop recording press .
5.
When you are finished, press .
Play back a memo directly
1.
Press . The memo is played back over the base speaker.
The day and time memo was recorded are announced.
2.
Press to stop playback at any time.
To delete the memo:
Press at any time during playback, after which 'Message
deleted' is announced.
See 'Listening to your messages', for information on how to
play back answering machine messages/memos.
Listening to your messages
When you have new messages, the number of new messages
will flash on the base display, and "
TAM
" appears on the handset
display. When the message alert is on, and you have new
messages stored on your answering machine, you will hear a
tone every 60 seconds. Any new messages will be played back
Allegro_CID TAD.book Page 14 Tuesday, January 15, 2008 4:30 PM