Operation Manual

19
English
Handset Label
You can change the name your phone displays on the screen.
If you have more than one handset, you can use the name to
identify your handset.
1. Press to access the main menu.
2. Press or to select " HS SETTINGS " and press .
3. Press or to select " HS LABEL ". Press .
4. Enter the name using the number keypad (up to 6
characters). Press to confirm.
Base ringer volume
There are 5 volume levels to choose from or you can select
volume Off.
1. Press to access the main menu.
2. Press or to select " BS SETTINGS " and press .
3. Press or to select " RING SETUP " and press .
4. Press or until " BS VOLUME " is displayed and press .
5. Press or to select the volume you want (you will hear
a sample of each as you scroll through), and press to
confirm.
Base ringer type
There are 5 base ringer melodies to choose from.
1. Press to access the main menu.
2. Press or to select " BS SETTINGS " and press .
3. Press or to select " RING SETUP " and press .
4. Press or to select " BS MELODY " and press .
5. Press or to select the melody you want. (you will hear
a sample of each as you scroll through), and press to
confirm.
Call barring
When switched on, Call Barring prevents external calls being
made.
1. Press to access the main menu.
2. Press or to select " HS SETTINGS ". Press .
3. Press or to select " BARRING ". Press .
4. " PIN ? " is displayed. Enter the PIN code using the number
keypad. Press .
5. Press or to select " ON " or " OFF ". Press to confirm.
11. Settings menu
Tones
You can switch on or off the tones for key touch, battery low,
and out-of-range alarm.
For example, when the key tone is set to ON, you will hear a
tone each time you press a keypad button.
1. Press to access the main menu.
2. Press or to select " HS SETTINGS ". Press .
3. Press or to select " TONE SETUP ". Press .
4. Press or to select the option you want
Allegro_CID TAD.book Page 19 Tuesday, January 15, 2008 4:30 PM