Operation Manual

32 Using additional handsets
9.2 Register a dierent make of handset to your D4 base
IMPORTANT
DECT GAP Prole only guarantees that basic calling functions will work correctly between
dierent makes / types of handset and base. There is a possibility that certain features
such as Caller ID will not work correctly.
On the base:
1. Press and hold
a for 3 seconds until you hear two beeps. The base will remain in
registration mode for 90 seconds.
On the handset:
Follow the registration instructions given in your handset’s user guide.
9.3 Select a base
If your D4 handset is registered to more than one base (e.g. one at work and one at home),
you can select which base to use.
Each handset can be registered with up to four bases.
1. Press
m, scroll d to REGISTER and press m. The display shows SELECT BASE .
2. Press
m. All the bases that your handset has been registered to will be displayed,
e.g.
BASE 1 2 3 4 . The currently selected base number flashes.
3. Enter the base number that you want to use. Alternatively, press
u or d to scroll to
AUTO .
4. Press
m to conrm. You will hear a conrmation beep and the display will return to
standby.
NOTE
If you select
AUTO , your handset will automatically search for and connect to the base
with the strongest signal.
9.4 De-register a handset
Use one handset to de-register another. You cannot de-register the handset that you are
using.
1. Press
m, scroll d to SETUP and press m.
2. Scroll
d to DEL HANDSET and press m.
3. Enter the 4 digit PIN code (default = 0000) and press
m.
4. Enter the handset number that you want to de-register. You will hear a conrmation
beep and the display will return to the previous menu.