User guide

Base settings 23
6.5 Recall mode
Depending on your country and network operator, your D5
has the recall time set as 600 ms (RECALL 2). It is unlikely
that you need to change this setting unless advised to do so.
1. Press m, scroll d to SETUP and press m.
2. Scroll d to RECALL and press m.
3. Press u or d to select RECALL 1 (short flash time) or
RECALL 2 (long flash time) and press m to confirm.
6.6 Restore default settings
You can restore your D5 to its default (original) settings.
All the handsets that are registered to the base will be
retained.
WARNING
Resetting your phone to its default settings will delete all
entries in the Phonebook and Calls list. All handset and base
settings will also be reset.
1. Press m, scroll d to SETUP and press m.
2. Scroll d to DEFAULT and press m.
3. Enter the 4 digit PIN code (default = 0000) and press m.
The display shows
CONFIRM ? .
4. Press m to confirm or n to return to the previous
menu. Your D5 will restart automatically.
6.7 Emergency default
If you have lost your PIN code, you can still restore your D5
to its default settings.
1. Remove the batteries from the handset.
2. Press and hold * while replacing the batteries.
The display shows
DEFAULT .
3. Press m to confirm. Your D5 will restart automatically.
6.8 Eco mode
Your D5 offers ECO mode function which reduces the
transmitted power and energy consumption when switched on.
To switch Eco mode on:
1. Press m, scroll d to SETUP and press m.
2. Scroll d to ECO MODE and press m.