Operation Manual

Personal settings 15
EN
7. Personal settings
Handset tones
WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your
hearing.
Ring volume
Choose from: Ringer Off, Low, Medium, High, Boost and Progressive (increasing ring volume).
NOTE
The default setting is High.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m.
3. RING VOLUME is displayed. Press m.
4. Scroll u or d to adjust the ringer volume level.
5. Press m to save the settings.
6. Press > to return to standby.
Ring melody
Choose from 10 ringer melodies.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to RING MELODY . Press m.
3. Press u or d to select the ringtone.
- A sample of the ringtone is played.
4. Press m to confirm.
5. Press > to return to standby.
Group melody
To benefit from this feature, you must subscribe to the Caller Line ldentification service.This menu
enables you to select and set the melodies to be played when there is an external incoming call
from a contact whose name is stored in your phonebook and is part of a group. You can associate
1 ring melody to each group. There are three phonebook groups (Group A, B, C) available for you
to organize your contacts. Each group can be assigned a unique melody.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to GROUP MELODY . Press m.
3. Scroll u or d to select: GROUP A , B or C , then press m.
4. Press u or d to select the ringtone you want for the group and press m.
5. Press > to return to standby.
Key tones on/off
When you press a key on the handset you hear a beep. You can switch these beeps on or off.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to KEY TONE . Press m.
3. Scroll u or d to select ON or OFF .
4. Press m to confirm.
5. Press > to return to standby.
First ring
Your D701 will automatically detect the Caller identification (Subscription dependent). If you do
not wish to hear the ring before the caller identification is displayed you can manually set FIRST
RING to OFF. The default setting is ON.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to FIRST RING . Press m.
3. Scroll u or d to select ON or OFF .
4. Press m to confirm.
5. Press > to return to standby.
Handset name
Personalise your handset, with a name or location for example Peter or Bedroom. Maximum 10
characters.
1. Press m, scroll d to PERSONAL SET and press m.
2. Scroll d to HANDSET NAME and press m. The current name is displayed.
3. Press e to delete the current name.
4. Enter the name you want – maximum 10 characters and press m
to save.
5. Press > to return to standby.
Auto pick up
With Auto pick up switched on, you can answer a call just by lifting the handset off the base or
charger. If switched off, you will have to press < to answer a call. The default setting is On.
1. Press m, scroll d to PERSONAL SET and press m.
2. Scroll d to AUTO PICK UP . Press m.
3. Scroll u or d to select ON or OFF .
4. Press m to confirm.
5. Press > to return to standby.
Auto hang up
With Auto hang up switched on, you can end a call just by replacing the handset on the base or
charger. If switched off, you have to press > to hang up. The default setting is On.
1. Press m, scroll d to PERSONAL SET and press m.
2. Scroll d to AUTO HANG UP . Press m.
3. Scroll u or d to select ON or OFF .
4. Press m to confirm.
5. Press > to return to standby.
Display language
You can change the display language.
1. Press m, scroll d to PERSONAL SET and press m.
2. Scroll d to LANGUAGE . Press m.
3. Scroll u or d to select the language you want.
4. Press m to confirm.
5. Press > to return to standby.
D701_IFU_EN_for_EU.book Page 15 Friday, August 24, 2007 5:19 PM