- Motorola, Inc. All-Digital Cable Receiver user guide

2 OPERATION

Turning Power On and Off

Press POWER on the remote control to turn the DCH

receiver on or off (standby). When using the remote

control, be sure it is in cable mode by pressing

CABLE

before pressing

POWER.

Changing Channels

You can change channels in three ways:

• Press channel + or – on the remote control to step

through the channel selection.

• Enter the number of the channel you wish to view

using the number keys on the remote control.

• Select the channel in the interactive program guide.

Adjusting the Volume

Press volume + or – on the remote control to adjust the

volume. When you adjust the volume, the volume scale is

displayed on the screen. Press mute on the remote

control to toggle the sound on and off.

For best audio quality, use the remote control to set the

DCH receiver to approximately three quarters of the

maximum volume level and then adjust the audio levels on

external devices such as your TV or A/V receiver.

Interactive Program Guide

The interactive program guide displays information about

TV programs and enables you to access features such as

Parental Control or Pay-Per-View. Interactive program

guides can vary with each cable service provider. Refer to