Home Theater System User Manual MODEL NO.: DCP 501

96 Operation
DCP501 User Guide
Program a Playlist with the TV Turned Off
1 With an audio CD inserted and stopped, press PROG twice within 1 second of each other. The
T r a c k icon and track number flashes and the program item number, P R : 1, is displayed.
2 Press CURSOR left/right (< >) to select a track number.
3 Press SELECT or OK to store the selected track number in the playlist. The program item
number will advance to 2 and the track number will be reset to 1.
4 Press CURSOR left/right (< >) to select a track number.
5 Press SELECT or OK to enter up to 20 track numbers in this manner until finished entering
the Playlist.
6 Press PLAY to begin playback of the play list.
Exiting Program Play on a CD
You exit Program Play when you:
 Open the disc tray

Press STOP on the DCP501 front panel or press twice on the DCP501 remote control.
 Turn off the DCP501
 Press
CLEAR on the remote control
Using the Repeat Feature
There are three Repeat options for a CD:
 Disc– repeat the disc that is playing.
 Track– repeat the title that is playing.
 A-B– set the beginning (point A) and the end (point B) to make this part of the part of the CD
play repeatedly.
Repeat Play
To use Repeat Play:
1 While a disc is playing, press REPEAT to display Repeat Disc.
2 Repeat options change when you press REPEAT in the following order:
 Repeat Disc
 Repeat Track
 Repeat Off
3 Press CLEAR or INFO to remove the Repeat options from your TV screen.