Home Theater System User Guide DCP501

Installation 39
DCP501 User Guide
Connecting Other Audio/Video Sources
You can connect an alternate audio/video source such as another DVD player by following the
diagram in Figure 20.
If you wish to use the digital audio output from a DVD player to the DCP501, you must assign
either the Optical1 or Coaxial digital audio input to the corresponding DCP501 video input
source by using the INPUT SETUP screens. If the DVD player is connected to the
VIDEO2 inputs
on the front panel, the DCP501 automatically uses the
OPTICAL2 digital audio input over the
analog input if it is available. See the “Operations” section for information on using the INPUT
SETUP screens. Before connecting the DVD player, check the manual supplied with the DVD
player for the manufacturer’s installation guidelines.
Figure 20
Connections for an alternate device
À
LA PLUIE NI À L’HUM IDITE”.
MODE L NO.: DCP 501
Video
A
udio
Cable(s) you will need:
DCP501
COAX
DIGITAL ANALOG
RL
AUDIO OUT
OPTICAL
VIDEO S-VIDEO
VIDEO OUT
Alternate
A/V Source