User Guide

100 Operation
DCP501 User Guide
4
Press SELECT or OK and the selected file is copied to the right-hand side of the screen as
shown in the example below.
5 Repeat steps 2 and 3 to add selections to your Programmed Playlist. You can have up to
1025 selections in your Programmed Playlist.
6 To listen to your selections, press PLAY

PAUSE on the front panel, or the play button (►) on
your DCP501 remote control and the play icon ► is displayed.
Deleting Selections from an MP3 CD
To remove selections from your MP3 Programmed Playlist:
1 Press CURSOR up/down (∧
∧∧
∧ ∨
∨∨
∨) to select an MP3 file from your Programmed Playlist.
2 Press CLEAR on the remote control and the selected file is deleted from the Programmed
Playlist on the right-hand side of the screen.
3 Continue selecting the files you want to delete.
4 To listen to your revised Programmed Playlist, press PLAY

PAUSE on the front panel, or the
play button (►) on your DCP501 remote control and the play icon ► is displayed.
To remove all files from a MP3 Programmed Playlist, press
CURSOR up/down (∧
∧∧
∧ ∨
∨∨
∨) to select
All Clear. Then, press SELECT or OK and all files are removed from the Programmed Playlist.
Selecting Specific Folder and Files for Playback
To playback a specific file on folder on your MP3 CD:
1 Press CURSOR up/down (∧
∧∧
∧ ∨
∨∨
∨) to select a folder and then press SELECT or OK. The files in the
selected folder are listed under the folder.
2 Press CURSOR up/down (∧
∧∧
∧ ∨
∨∨
∨) to select a file and then press SELECT or OK. Playback starts
from the file or folder you selected. Files in the next folder are played back when there are
no files are in the selected folder.