Installation Instructions
Table Of Contents
- DCT 2000 Installation Manual
- Caution | Compliance | Copyright
- Contents
- Section 1 | Introduction
- Section 2 | Overview
- Section 3 | Installation
- Before You Begin
- Installing the DCT 2000
- Standard Cabling Diagram
- STARFONE Module Cabling Diagram
- Standard VCR Cabling Diagram
- RF Bypass Switch VCR Cabling Diagrams
- A/B In Module Cabling Diagrams
- Dual A/B-RF Bypass Module Cabling Diagrams
- Composite Baseband and S-Video Cabling Diagrams
- Stereo Cabling Diagram (Baseband)
- Dolby Digital Cabling Diagrams
- Operational Check
- Section 4 | Adding the IR Blaster Option
- Section 5 | Troubleshooting
- Appendix A | Specifications
- Appendix B | Diagnostics
- Accessing Diagnostics
- Navigating the Diagnostics
- d 01: DCT 2000 General Status
- d 02: Out-of-Band Receiver Status
- d 03: In-Band Receiver Status
- d 04: In Band Error
- d 05: Unit Address
- d 06: Firmware Version
- d 07 Current-Channel Status
- d 08: Renewable Security System
- d 09: Upstream Modem Status
- d 10: Application Code Modules
- d 11: Memory Status
- d 12: Keyboard Diagnostics
- d 13: Interactive Info – OSD
- d 14: MAC Frequency – OSD
- Abbreviations and Acronyms
Overview 2
22
2-
--
-7
77
7
DCT 2000 Installation Manual
Table 2-4 describes the remote control keys:
Table 4
Remote control keys
Key Item Description
1 AUX, VCR, CABLE, or TV
Selects a desired device to control. The selected mode will remain active until you press
another key.
2HELP
Displays the help screen.
3POWER
Turns the selected home entertainment component on or off.
4 PAGE
▲
▲ ▲
▲
or PAGE
▼
▼▼
▼
Pages through menu screens and the program guide.
5 EXIT
Exits a menu or program guide.
6
Moves the cursor around the program guide and menu screens.
7 OK/SELECT
Selects menu options, Pay-Per-View events or tune programs from the program guide.
Your remote may only have OK; this key still performs the same functions.
8 GUIDE
Displays the program guide.
9VOLUME + or
VOLUME -
Increases or decreases the volume of the currently selected device.
10 A, B , or C
Functionality is determined from services offered by the service provider.
11 NUMBER KEYS
Directly selects a channel.
12 TV/VCR
BYPASS
Enables the RF bypass function. A cable-ready TV is required for this function to operate.
13
◄
◄◄
◄
Day
Day
►
►►
►
Moves the program guide ahead or back 24 hours.
14 STOP, PAUSE, PLAY, REW,
RECORD, F.FWD
Controls the VCR.
15 MUTE
Toggles the sound on and off.
16 LOCK/PPV
Limits viewing of selected programs; and is used to view the Pay-Per-View menu. Your
remote may have only LOCK; this key still performs the same functions.
17 INFO
Displays the current channel and program information (not supported by all
applications).
18 MENU
Displays the Main menu.
19 LAST
Recalls the last channel or goes back one screen in the menu.
20 CHANNEL + or -
Changes the channels by moving up or down.
21 FAVORITE
Displays preset favorite cable channels.
22 ENTER/MUSIC
Displays digital music channel menus. On some TV models, press to enter channels.