Installation Instructions
Table Of Contents
- DCT 2000 Installation Manual
- Caution | Compliance | Copyright
- Contents
- Section 1 | Introduction
- Section 2 | Overview
- Section 3 | Installation
- Before You Begin
- Installing the DCT 2000
- Standard Cabling Diagram
- STARFONE Module Cabling Diagram
- Standard VCR Cabling Diagram
- RF Bypass Switch VCR Cabling Diagrams
- A/B In Module Cabling Diagrams
- Dual A/B-RF Bypass Module Cabling Diagrams
- Composite Baseband and S-Video Cabling Diagrams
- Stereo Cabling Diagram (Baseband)
- Dolby Digital Cabling Diagrams
- Operational Check
- Section 4 | Adding the IR Blaster Option
- Section 5 | Troubleshooting
- Appendix A | Specifications
- Appendix B | Diagnostics
- Accessing Diagnostics
- Navigating the Diagnostics
- d 01: DCT 2000 General Status
- d 02: Out-of-Band Receiver Status
- d 03: In-Band Receiver Status
- d 04: In Band Error
- d 05: Unit Address
- d 06: Firmware Version
- d 07 Current-Channel Status
- d 08: Renewable Security System
- d 09: Upstream Modem Status
- d 10: Application Code Modules
- d 11: Memory Status
- d 12: Keyboard Diagnostics
- d 13: Interactive Info – OSD
- d 14: MAC Frequency – OSD
- Abbreviations and Acronyms
B
BB
B-
--
-16
1616
16 Diagnostics
DCT 2000 Installation Manual
Current Channel Status OSD
The current channel status OSD has the following fields:
§
The TYPE field indicates whether the current channel is analog or digital.
§
The STATUS field indicates the current channel acquisition/authorization state.
§
The ddd CONNECTED field indicates whether the DCT 2000 is connected or disconnected.
If the value is connected, the program is viewable.
§
The PARENT CONTROL field indicates whether the current channel is parentally
controlled.
§
The PURCHASABLE field indicates that the program can be purchased.
§
The PURCHASED field indicates that the program has been bought.
§
The PREVIEW field indicates that the program is in the free preview state.
Figure B-15 illustrates the current channel status display for analog channels on the OSD:
Figure B-15
CURRENT CHANNEL STATUS OSD for analog channel
CURRENT CHANNEL STATUS
TYPE ANALOG
STATUS ccccc
ddd CONNECTED
PARENT CONTROL YES
PURCHASABLE YES
PURCHASED YES
PREVIEW YES
Figure B-16 illustrates the current channel status display for digital channels on the OSD:
Figure B-16
Current channel status OSD for digital channel
CURRENT CHANNEL STATUS
TYPE DIGITAL aaa bb
STATUS ccccc
ddd CONNECTED
PARENT CONTROL YES
PURCHASABLE YES
PURCHASED YES
PREVIEW YES