User guide

DCT5100 User Guide

Connecting a TV, VCR, DVD, and A/V Receiver or Amplifier

This cable configuration may be used for a mono or stereo TV, because

the TV audio and video jacks are not used.

When using a mono VCR with this setup, a stereo audio cable with a

Y-cable adapter is needed to connect the mono VCR to the A/V receiver

or amplifier.

Please refer to the Audio and Video Options on the following page for

more information on this cable configuration.

1 Connect an RF coaxial cable to the cable wall outlet and the

CABLE IN connector on the DCT5100.

2 Connect a stereo audio cable to the AUDIO OUT R and L connectors

on the DCT5100 and the

VIDEO 1 AUDIO R and L connectors on the

A/V receiver or amplifier.

3 Connect a video cable to the VIDEO OUT connector on the DCT5100

and the

VIDEO 1 video connector on the A/V receiver or amplifier.

4 Connect a stereo audio cable to the DVD AUDIO R and L connectors

on the A/V receiver or amplifier and the

AUDIO OUT ANALOG R and L

connectors on the DVD.

5 Connect a video cable to the DVD VIDEO connector on the

A/V receiver or amplifier and the

VIDEO OUT VIDEO connector on the

DVD.

6 Connect a stereo audio cable to the VCR IN AUDIO R and L

connectors on the A/V receiver or amplifier and the

OUTPUT AUDIO R

and

L connectors on the VCR.

7 Connect a video cable to the VCR IN VIDEO connector on the A/V

receiver or amplifier and the

OUTPUT VIDEO connector on the VCR.

8 Connect a stereo audio cable to the VCR OUT AUDIO R and L

connectors on the A/V receiver or amplifier and the

INPUT AUDIO R

and

L connectors on the VCR.

9 Connect a video cable to the VCR OUT VIDEO connector on the A/V

receiver or amplifier and the

INPUT VIDEO connector on the VCR.

10 Connect a video cable to the TV/MONITOR OUTPUT connector on the

A/V receiver or amplifier and the

INPUT VIDEO connector on the TV.