Cordless Telephone User's Manual
Using the phone 25
3.23 Set the Area Code
1.
Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS
.
2.
Press MENU and then VOL+ or REDIAL/VOL- to select
AREA CODE
.
3.
Press MENU and enter the area code.
4.
Press MENU to save.
3.24 Registration
Up to 5 handsets can be registered to one base. The original
handset is pre-registered to use. Additional handsets must
be registered to the base before you can use them.
To register an additional handset,
1.
Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS
.
2.
Press MENU and then VOL+ or REDIAL/VOL- to select
REGISTRATION
.
3.
Press MENU and then VOL+ or REDIAL/VOL- to select
YES
or
NO
.
4.
Select
YES
and press MENU to enter the registration
procedure as below:
1.
Press and hold FIND for 4 seconds on base, and then
release.
2.
Place the unregistered cordless handset on the base
or charger.
3.
A confirmation tone is generated if registration is
successful.
HANDSET X
is displayed where
X
denotes the
number of handsets and the phone goes back to idle.
To register an originally unregistered handset, follow steps 1
through 3 above.
3.25 To reset all settings
1.
Press MENU and then VOL+ or REDIAL/VOL- to select
RESET SETTINGS
.
2.
Press MENU and then VOL+ or REDIAL/VOL- to select
ALL SETTINGS
.
3.
Press MENU to select
YES
. Then all the personalized
settings will be reset to default.