User guide

iControl
Release Notes
59
input in iControl version 3.10 and later requires firmware version 2.6 on the MTM400.
Please contact
[e-mail] for more information.
•
[Ref. #18784] When upgrading from iControl version 3.20 (and later) to a newer version, the
existing WidgetLibrary is renamed WidgetLibraryOld, and a new, upgraded WidgetLibrary
is installed. Custom widgets that had been saved in the old WidgetLibrary become
unavailable in iC Creator.
Workaround: Import custom widgets from WidgetLibraryOld, and save them in a location
other than the new WidgetLibrary.
•
[Ref. #17698] Upgrading from iControl version 2.XX to version 3.XX deletes all Webmin users
except root and miranda.
Cards and Devices Supported in this Release
Densité Series Cards
iControl version 4.40 is compatible with both Densité Ethernet Controllers (CPU-ETH and
CPU-ETH2). In the case of CPU-ETH, it is strongly recommended to upgrade to the latest
Densité Ethernet Controller version (3.00 or later). Use the Miranda Interface Updater in
conjunction with the latest CPU-ETH2 version (2.0.4) to upgrade the Densité Ethernet
Controller.
For each Densité Series card supported in this release, the following table provides the card
model and ID, the Miranda Assembly Number, and the iControl version number that first
supported this model.
The star (
) symbol indicates a new card, or new version of a card, that is supported in this
release.
Latest Densité card firmware versions supported by iControl
Card Model Firmware Version Introduced in iControl
3DX-3901 1.2.0 3.70
AAP-1741 1.0.1 3.20 or earlier
ACP-1721 3.2.1 3.20 or earlier
ADA-1001 3.20 or earlier
ADA-1021 3.20 or earlier
ADA-1023 2.0.0 3.20 or earlier
ADA-1031 4.0.0 3.20 or earlier
ADA-1033 4.0.0 3.20 or earlier
ADC-1101 1.1.0 3.20 or earlier
ADC-1721 2.0.4 3.20 or earlier
ADC-1722 2.0.4 3.22
ADX-1121 3.20 or earlier