Weather Radio User Manual

3
26
Power Cycle Option
The Power Cycle option reboots the DSR-6000 without losing internal user setup
information or downloaded network information. Pressing the ENTER button
causes the following warning message to appear.
Press any arrow button (
3456
) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed. The following message displays:
Core Menu
Press the
56
buttons until the Core menu appears. This menu allows the user to
change the front panel LCD contrast.
Contrast Field Default: 18
To adjust the LCD contrast, press the
4
button until the cursor is at the Contrast
label, and press the ENTER button to move into the field. Use the arrow buttons
(
3456
) to select a value between 1 and 30, with 1 representing the least
contrast and 30 the most. Adjust the contrast so that the LCD panel can be read
clearly. Press the ENTER button to confirm the selection.
Press E to continue or to stop
CAUTION: Reset will interrupt service
Press E to continue or to stop
Power Cycle reset in progress. . .
E 18
Core Contrast