Weather Radio User Manual

Channel Menus

Channel Menu

Press the

buttons until the Channel menu appears. This menu allows the user

to select an active VCT, select the virtual channel, and view the name of the current

transponder.

VCT Field

Use this to select a Virtual Channel Table (VCT) number. Contact the program

provider for the correct VCT number to enter for that encoder system. Press

the

button until the cursor is at the VCT label, and press the ENTER button to

move into the field. While ensuring that the cursor remains on the up/down symbol,

press the

buttons to scroll throughout the available VCTs. (If the network has

four VCTs, then only four VCTs appear in this field.) Press the ENTER button to

confirm the selection.

This field also provides a second method for selecting the VCT. To do this, use the

buttons to select the digit to change and then, while the cursor is on that digit,

press the

buttons to display the required value. Repeat this process for each

applicable digit.

Channel Field

The Channel field allows selection of the virtual channel for the output service. The

DSR-6000 supports channel values from 0000 to 4095. Press the

button until the

cursor is at the Channel label, and press the ENTER button to move into the field.

While ensuring that the cursor remains on the up/down symbol, press the

buttons to scroll through the available virtual channels. (If the chosen VCT

contains twenty-four virtual channels, then only twenty-four virtual channels

appear in this field.) Press the ENTER button to confirm the selection.

This field also provides a second method for selecting the virtual channel. To do

this, use the

buttons to select the digit to change and then, while the cursor is

on that digit, press the

buttons to display the required value. Repeat this

process for each applicable digit.

E 00000 0000 (Not in map)

CHANNEL VCT Channel Xpndr