User manual

36 Connect
• Security: Select WPA2 PSK. Enter a unique
password. Other users can access your Wi-Fi
hotspot only if they enter the correct password.
Note: Keep it secure. To protect your phone and
hotspot from unauthorized access, it is strongly
recommended that you set up hotspot Security
(WPA2 is the most secure), including password.
• Broadcast Channel: Select a channel that
minimizes potential interference. You may need
to try different channels after your hotspot is
active for a time.
3 Touch Save when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot’s SSID,
selecting a Security type, and entering the correct
Password.
Wi-Fi modes
For those who like to get a bit more technical, your
phone supports the following Wi-Fi modes:
802.11 b, g, n.
Bluetooth wireless
Turn Bluetooth power on or off
Tu r n o n : To uch Ap p s > Settings, then drag the
Bluetooth power switch to the right.
OFF
Tu r n o f f : Drag the Bluetooth power switch to the
left.
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
2 Touch Apps > Settings > Bluetooth.
3 Drag the Bluetooth power switch to the right to
turn on and scan. If Bluetooth power is already on,
touch SEARCH FOR DEVICES.
4 Touch a device to connect.
5 If necessary, touch OK, or enter the device passkey
(like 0000) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
ON
OFF