Automobile Accessories User Manual

20 MW810 Mobile Workstation Vehicle Installation Manual
The 8.4” Display supports the following installation methods:
• Free-standing Pedestal Mount
• In-dash DIN Mount
The Free-standing Pedestal Mount
The Free-standing Pedestal Mount affixes to the vehicle’s floor or transmission hump using
self tapping screws or bolts. It allows the display mount to be readjusted to either the driver
or passenger side for most comfortable viewing angle. A single adjustment knob enables
adjustment of both upper and lower ball joints simultaneously.
This section describes the tools and equipment, plann
ing requirements, and product
inspections necessary for a smooth installation of the 8.4" Display.
Proper planning will help to ensure that the installation is completed
wit
hout difficulty and
that no damage occurs to the units or the vehicle.
The 8.4" Display is a reliable product when installed correctly.
However, performance can be seriously impaired if it is not installed
correctly. Thoughtful planning can make the difference.
Installing any part of the 8.4" display must be according to the
instructions provided in this manual.
Figure 12
MW810 8.4” Display - Free-standing Pedestal Mount
Adjustment Knob
Four 10mm, M4 Screws
!
Caution
!
Warning