Automobile Accessories User Manual

30 MW810 Mobile Workstation Vehicle Installation Manual
The CPU Box Mounting Trunnion
When installing the CPU Box, a Mounting Trunnion (see Figure 23) should always be used
unless an alternate method or other mounting option is specifically certified
by Motorola
Solutions.
The CPU Box can be mounted at any place in the pa
ssenge
r compartment that provides
adequate ventilation (see Figure 5).
It is recommended that the CPU Box be mounted in a place where
the removable HDD/SSD
enclosure, Express Card & SIMs Compartment can be easily accessed. Attach the adhesive
tape, provided in the shipping carton, to the Express Card to enable easy removal of the
Express Card from the Express Card & SIMs Compartment.
Suggested locations for CPU Box instal
lation, in order of preference, are: on the trunk tray,
on the front of the prisoner cage, under the dashboard, inside the console, or under the seat
(not in the direct path of the vehicle heater air flow).
The CPU Box Mounting Trunnion is attached to the CPU
Box
by four bolts supplied with the
Mounting Trunnion. The Mounting Trunnion can be affixed to a flat surface by eight bolts
(not included).
1. Never try to remove the HDD/SSD un
it before shutting
down the workstation and switching off the On/Off power
switch on the backpanel of the CPU Box. Doing so can
result in loss of data, and can damage the workstation and
the sensitive circuitry of the HDD.
2. Make regular backups of data from your HDD to an
external fla
s
h disk or other storage media.
3. Once the HDD/SSD Unit is removed from the HDD/SSD
Unit Compartment, the
CPU Box is not sealed. In such
condition, do not expose the CPU Box or HDD/SSD Unit
to sand, dust, liquid or extreme humidity.
!
Caution