USER’S GUIDE Wi-Fi® Home Video Camera Models: FOCUS66-B, FOCUS66-B2, FOCUS66-S, FOCUS66-S2, FOCUS66-W, FOCUS66-W2 The features described in this user’s guide are subject to modifications without prior notice.
Welcome... to your new Motorola Wi-Fi® Home Video Camera! Thank you for purchasing your new Motorola Wi-Fi® Home Video Camera. If you have always wondered what happens when you are away, wonder no more. Now you can monitor your children, pets or property with this easy to use system. You can install the Camera only from your iPhone®/iPad® or devices for Android™ and view the Camera video from your PC or Notebook, as well as devices for Android™ or iPhone®/iPad®.
Overview of your Camera 1 2 3 7 8 4 5 9 6 1. 2. 3. 4. 5. Power / Status indicator Microphone Light Sensor (for night mode detection) Camera Lens Infrared LEDs (for night vision) 10 Speaker ON/OFF Switch 8. Temperature Sensor 9. Micro USB socket 10. PAIR Button 6. 7. Important guidelines for installing your Wi-Fi® Camera Unit • Use of other 2.4 GHz products, such as other wireless networks, Bluetooth® systems or microwave ovens may cause interference with this product.
Table of contents 1. 2. 3. Safety Instructions .....................................................................................5 System Requirements ............................................................................... 7 Getting started - Connecting Devices...................................................... 8 3.1 3.2 3.3 4. Camera .................................................................................................... 21 4.1 4.2 4.3 4.4 5. 6. 7. 8. 4 Setup..............
ENGLISH 1. Safety Instructions WARNING: STRANGULATION HAZARD - In case this unit is being used to monitor infants or children, keep the unit and adapter cord more than 1 metre from the cot and out of their reach. Never place camera or cords within a cot or near a bed. Secure the cord away from children's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
WARNING This Wi-Fi® Camera Unit is compliant with all relevant electromagnetic field standards and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device. • Adult assembly is required due to small parts. Keep all small parts away from children. • This product is not a toy. Do not allow children to play with it. • This Wi-Fi® Camera Unit is not a substitute for responsible adult supervision.
ENGLISH 2. System Requirements Web Portal • Windows® systems, 7 or 8 (Java browser plug-in needed) • Mac OS® version 10.7 or above • Internet Explorer® version 8.0 or above • Firefox® version 11.0 or above • Chrome™ version 18.0 or above • Safari® version 5.1 or above • Java™ version 7 or above Android™ System • Version 4.0 or above iPhone®/iPad® iOS • Version 7.
3. Getting started - Connecting Devices How does it work? Access your Camera locally View your Camera from any compatible device remotely When a user tries to access the Camera, our secure server authenticates the user’s identity and permits access to the Camera. 3.1 Setup Connect the Camera to the power adapter, then plug into an suitable mains power socket and make sure the power switch is in the ON position. The Camera must be within range of the Wi-Fi® router with which you want to connect it to.
User Account and Camera Setup on Android™ Devices ENGLISH 3.2 What you need • FOCUS66 camera • FOCUS66 camera power adapter • Device with Android™ system version 4.0 or above 3.2.1 Power on and connect the FOCUS66 camera • Connect the FOCUS66 adapter to a suitable mains power socket, insert the power adapter plug into micro USB socket at back of FOCUS66 camera. • Make sure that ON/OFF button is in the ON position. • The camera’s red LED blinks after the camera has finished booting.
3.2.3 Run Hubble for Motorola Monitors App on Android™ device • Ensure your Android™ device is connected to your Wi-Fi® router. • Run Hubble for Motorola Monitors application and key in your Hubble for Motorola Monitors account information, read through the Terms of Service then select “I agree to the Terms of Use” before you tap on Create. (Picture A1) Note: If you have Hubble for Motorola Monitors account, please select Already have a Account? to go to the next step.
Add FOCUS66 Camera to your account ENGLISH 3.2.4 • Create a new account and login. • Tap on Add Camera. (Picture A2) • Tap on Continue. (Picture A3) A2 A3 • The setup instructions will appear on the following screen.
• Press and hold the PAIR button for 3 seconds at the side of FOCUS66 camera, you will then hear a beep tone and voice “Ready to start pairing” from the Camera unit, then tap on Search for Camera. • The App will automatically search and connect your Camera as shown below pictures (A5 & A6) and the Blue/Red colour LED on the camera will blink.
A7 A8 • It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status (Picture A9, A10). If connection fails, please tap on the Retry button and repeat steps starting from 3.2.4. Congratulations! You have successfully setup your Motorola Wi-Fi Camera A9 Getting started - Connecting Devices A10 13 ENGLISH • Select your Wi-Fi® Network and tap Continue, enter your password and then tap on Connect.
• Tap on Watch Live Camera to view camera video and the Camera blue LED will blink. (Picture A11) • Tap on Hubble logo and go back to camera list.
User Account and Camera Setup: Working with iPhone®/iPad® ENGLISH 3.3 What you need • FOCUS66 camera • FOCUS66 camera power adapter • iPhone® / iPad® with iOS 7.0 version or up 3.3.1 Power ON and Connect FOCUS66 camera • Connect the FOCUS66 adapter to a suitable mains power socket, insert the plug into micro USB socket at back of FOCUS66 camera. • Ensure ON/OFF button is pushed ON.
3.3.3 Run Hubble for Motorola Monitors on your iPhone®/iPad® • Ensure your iPhone®/iPad® is connected to your Wi-Fi® Router. • Run Hubble for Motorola Monitors application and key in your Hubble for Motorola Monitors account information, read through the Terms of Service then select “I agree to the Terms of Service” before you tap on Create. (Picture i1) Note: If you have a Hubble for Motorola Monitors account, please select Already have a Account? to go to the next step.
Add FOCUS66 Camera to your account ENGLISH 3.3.4 • Create a new account and login. • Tap on Add Camera. (Picture i2) • Tap on “FOCUS66”.
• Tap on Continue and follow the instructions (5 steps) as below.
ENGLISH • Follow the steps above to locate the Camera with identification "CameraHDxxxxxxxxxx" then tap on Continue. (Picture i8) i8 ® • Select Wi-Fi Network to tap Continue then enter password to tap Next.
• It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status (Pictures i11, i12). If connection fails, please tap on the Retry button and repeat 3.3.4 as instructed above. i11 i12 • Press Watch Live Camera to view Camera video. (Picture i13) • Tap on Hubble logo to go back to Camera list.
4.1 Connecting the Camera to Power • Insert the small end of the Power Adapter into the Power Adapter Connector and plug the Power Adapter into a suitable mains power socket. • Slide the ON/OFF switch to ON, the blue Power LED will light up. (Note: to switch the device off, slide the ON/OFF switch to OFF.) 4.2 Camera Functions: Working with devices for Android™ • Run the Hubble for Motorola Monitors application on your Android™ device. • The Camera view appears on the screen. 4.2.
• Once the Camera has been added, the Camera view will be automatically displayed.
Remove a camera ENGLISH 4.2.2 You can remove a camera from your account by following these steps: • Tap the Setting icon (Picture A15) on General page, then tap on Remove Camera. • Select Remove to delete the unit from camera list.
4.2.3 Change your Account Information You can change the account information using Android™ device. • Tap Account on General page, the account setting appears on screen. (Picture A17) • Tap on Change Password to change your password following the instruction. • Tap on Log Out to leave the account. • Tap on Freemium plan and it will proceed to the link of Cloud Video Recording Service, to obtain more information, please visit our website http://www.hubbleconnected.com.
Camera settings You can change the Camera settings by tapping the Setting icon Camera page. (Picture A18) ENGLISH 4.2.4 on the • Tap on Camera Details to review Camera Name, Change Image & Firmware version. (Picture A19) A18 A19 • Tap on Notification Sensitivity to set the sensitivity of sound & motion detection, and set Alert of High/Low temperature.
4.2.5 General setting • Tap Settings on General page. • Tap on General Settings to shift the format of Clock (12hr/24hr) & Temperature (°C / °F). (Picture A21) A21 A22 • Tap on Do Not Disturb, set the timer which you prefer and select ON, the Camera will not send any sound or alert to your Android™ device in the duration of your setting.
Features of Hubble for Motorola Monitors Application Tap on the viewing area and the function icons will appear as below. Two Way Talk – Tap on to activate the function. Press the round button once to speak through the camera. Toggle the button again to listen to the audio feedback from Camera. (Pictures A23, A24) A23 A24 Photo/Video - Take a photo or record a video from your Camera. Tap Video icon to activate the video function and press the red dot to start and release to stop recording.
Tap Camera icon to switch to Camera mode, you can capture photos from camera view. (Picture A27) A25 A26 Note : Photos and videos will be stored in the internal flash memory of your device for Android™, they can be accessed from Gallery or Media Player. To play videos, please use the “Hubble for Motorola Monitors” application or a 3rd party application, such as MX player (i.e. Google Play™ Store), which is able to play MJPG (Motionjpeg).
Temperature Measure – The temperature reading from the temperature sensor at the back of the Camera will display on your Android™ device screen (Picture A29). The reading will turn RED if the temperature goes beyond the High/Low Temperature range as set in your Account. (see section 4.2.4) A28 Camera A29 29 ENGLISH Melody – To play one of the pre-set 5 melodies sound in system, tap on Melody to show the Melody menu and select one you prefer to play on your Camera.
4.3 Camera Functions: Working with devices for iPhone®/iPad® • Run the Hubble for Motorola Monitors application on your iPhone®/iPad®. • The Camera view appears on the screen. 4.3.1 Add more cameras • On Camera view, tap on the Motorola logo to go back to Add Camera page. (Picture i15) • Tap on Add Camera to add another camera (follow steps for iPhone®/iPad® setup 3.3.4.) (Picture i16) • Once the Camera has been added, the Camera view will be automatically displayed.
Remove a camera ENGLISH 4.3.2 You can remove a camera from your account by following these steps: • Tap the Setting icon (Picture i17) on General page, then tap on Remove Camera. • Select Remove to delete the unit from camera list.
4.3.3 Change your Account Information You can change the account information using your iPhone®/iPad®. • Tap Account on General page and the account settings will appear on screen. (Picture i19) • Tap on Change Password to change your password by following the instruction. • Tap on Log Out to leave the account. • Tap on Current plan and it will proceed to the link of Cloud Video Recording Service. To obtain more information, please visit our website www.hubbleconnected.com/motorola/plans.
Camera settings You can change the Camera settings by tapping the Setting icon on General page (Picture i20). You can review the Camera Name and Firmware version (Picture i21) and allowed to change the camera name by tapping on the existing name by following the instruction. i20 i21 4.3.5 General settings • Tap Settings on General page. (Picture i22) • Tap on General Settings to shift the format of Clock (12hr/24hr) & Temperature (°C / °F). (Picture i23) i22 Camera i23 33 ENGLISH 4.3.
• Tap on Notification Sensitivity to set the sensitivity of sound & motion detection, and set Alert of High/Low temperature. (Picture i24) i24 i25 • Tap on Do Not Disturb, set the timer which you prefer and select ON, the Camera will not send any sound or alert to your iPhone®/iPad® in the duration of your setting.
Hubble for Motorola Monitors Settings • Tap on Settings on your iPhone®/iPad® and the applications will appear, tap on Hubble for Motorola Monitors App and the settings in the Hubble for Motorola Monitors app will be shown on screen. (Picture i26) i26 Camera 35 ENGLISH 4.3.
4.3.7 Features of the Hubble for Motorola Monitors Application On Camera view, tap the viewing area and Function Icons will appear as following, Two Way Talk – Tap on to activate the function. Press the round button once to speak through the camera. Toggle the button again to listen to the audio feedback from Camera. (Pictures i27, i28) i27 Take Picture - Tap on the Camera icon view.
ENGLISH Note : Photos will be stored in The internal flash memory of your iPhone®/iPad®. Melody – To play one of the pre-set 5 melodies sound in system, tap on Melody to show the Melody menu and select one you prefer to play on your Camera. (Picture i30) Temperature Measure – The temperature reading from the temperature sensor at the back of the Camera will display on your iPhone®/iPad® screen (Picture i31).
4.4 Camera Functions: Working with PC/Notebook • Go to http://www.hubbleconnected.com/motorola/login/ • Enter your User Name and Password and then click Login if you have already created an account. • Click on the Camera list paired in your account via Android™ device or iPhone®/iPad® and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming.
Note: If your Camera is moved from one router (e.g. home) to another router (e.g. office) or you have Camera setup issues, then the Camera has to be reset. Please reset the Camera with the following procedure: 1. 2. 3. 4. Slide the ON/OFF switch to ON. Press and hold the PAIR button on the underside of the Camera for 5 seconds, until you hear "Ready to start pairing". Release the PAIR button and wait for the Camera to complete the internal reset procedure.
6. Help Noise interference To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi® Camera Unit. Use of other 2.4 GHz products, such as Bluetooth® systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi® Camera Unit at least 1.5m away from these types of products, or turn them off if they appear to be causing interference. Lost connection Check your Wi-Fi® settings. If necessary reconnect your Wi-Fi®.
What do I do if I forgot Click on the "Forgot Password" link on my password? the http:// www.hubbleconnected.com/ motorola/login/ website OR your Android™ or iOS application. An email will be sent to your registered email address. Account I am unable to receive a 1. new password although I have used the "Forgot 2. password" option. The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder. There might be a delay in getting your e-mail.
Features The sound alert setting You can Adjust Sound Sensitivity to threshold is not right. trigger notifications under Camera Setting menu. Connectivity My Phone application Issues displays the following message: "Unable to connect to BMS server". 1. 2. 3. Check the Wi-Fi ® network strength. Check if you are connected to the internet by starting the phone browser and going to a website like www.google.com. Try again if you are successful connecting to the internet.
What is the significance of LED flashing? A blinking LED indicates the following status: Slow blinking: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in setup mode. To reset to setup mode, press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Slow blinking: 2. The Camera is either connecting to the router or lost the link to the router. Please ensure that the Camera is in the Wi-Fi® signal range.
Connectivity Even though I am Issues accessing my Camera from the same Wi-Fi ® network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. Please check your wireless router settings. For example, in Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. Camera When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do? Please upgrade your firmware. This takes around 5 minutes.
What is the meaning of When you are accessing your camera from the same wireless network (Home) "Local Camera" and in which it is configured, "Remote Camera"? it is a local camera. When you are accessing your Camera away from your home it is a remote camera. You may be using 3G, 4G or 4G LTE or a Wi-Fi ® connection outside of your home. General How do I download the Android™: APP for Android™ and - Open Google Play App on your iOS devices? Android™ device.
Setting up When the video is cut off, the application attempts to reconnect and and results in lost sound and choppy video. You will need to turn off the auto lock function of your smart device to ensure continuous video/audio feeding. Features How many users can access the Camera at one time? If you are accessing in local more, two users are supported, after two users all streaming will go through remote server. This allows for unlimited user access to a single Camera at one time.
ENGLISH 7. General Information If your product is not working properly.... 1. 2. Read this User's Guide. Contact Customer Service at: +49 (0) 1805 938 802 in Europe Email: motorola-mbp@tdm.de Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage Two (2) years from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
________________________________________ ENGLISH BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.co.uk . EC Declaration of Conformity We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom.
8. Technical Specifications Camera Unit Wi-Fi ® 802.11 b/g/n Image sensor Colour CMOS 1M Pixels Lens f = 2.3 mm, F = 2.4 IR LED 7 pcs Power Adapter: Ten Pao International Ltd.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Mac, Mac OS, iPhone, iPad and Safari are the trademarks of Apple Inc., registered in the U.S. and other countries. Android, Google Play and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.