Operation Manual

8 Getting Started - Connecting Devices
3. Getting Started - Connecting Devices
How does it work?
When a user tries to access the Camera, our Hubble server authenticates the
user’s identity and permits access to the Camera.
3.1 Setup
Connect the Camera to the Power Adapter, then plug into a suitable mains
power socket and make sure the ON/OFF Switch is in the ON position. The
Camera must be within range of the Wi-Fi
®
router with which you want to
connect. Make sure the password of the router is available for entering during
the in-app setup process.
Status of LED Indication:
- Pairing/Setup state: LED is red and blue and slowly flashing
- Unconnected state: LED is red and slowly flashing
- Connected state: LED is blue and always on
- Ready for connection state: LED is blue and slowly flashing
Note: You can only setup via a compatible smartphone or tablet and not via a PC.
Access your
Camera locally
View your Camera from
any compatible device
remotely
FOCUS86
Camera
Wi-Fi Router
Hubble Service