Technical information

July 15, 2007 Using FTP with G24 iii

Preface

Manual Scope

This manual introduces the G24 AT commands, and describes how software developers can use

these commands to communicate with the G24 device, and to create software applications that

communicate with the G24 using these commands.

Note: The integrator should read the corresponding SW release notes for the G24 version he is

using to get information about differences from this manual.

Target Audience

This manual is intended for software developers who communicate with the G24 device using the

AT commands, and create applications to communicate with the G24 device using the AT

commands.

Manual Organization

This manual contains the following chapters:

• “Preface” provides a scope for this manual, document convention, safety instructions and a

liability notification.

• “Chapter 1: Using FTP with G24” introduces the FTP features.

• “Chapter 2: AT Commands Reference for FTP” provides a reference to all available FTP

related AT commands, including examples, where relevant.

Applicable Documents

• G24 AT Commands Reference Manual - 6889192V28

• G24 Module Hardware Description – 6889192V27

• G24 Developer’s Kit – 6889192V26

We at Motorola want to make this guide as helpful as possible. Keep us informed of your

comments and suggestions for improvements.

For general contact, technical support, report documentation errors and to order manuals, use this

email address: