User guide

18
4 No sound is heard
from the remote
speaker.
1. Turn the radio on and set a medium volume.
When the radio detects the car kit, some ring
tones should be audible from the speaker.
2. Verify that the remote speaker is properly
connected to the junction box.
3. Remove the radio from the cradle and install
it again.
4. If the malfunction persists, refer to your
Service Provider.
5 The other party in a
phone call (Radio in
phone mode) does
not hear your voice,
or, you do not get a
response after a few
attempts.
1. Verify that the radio is ON and an active call
is present
.
2. Verify that the remote directional
microphone is adjusted to your direction.
3. Verify that the remote directional
microphone is properly connected to the
junction box.
4. Remove the radio from the cradle and install
it again.
5. If the malfunction persists, refer to your
Service Provider.
6 A dispatch call
cannot be made.
1. Verify that the remote PTT is properly
connected to the junction box.
2. Verify that the cradle connector is properly
connected to the junction box.
3. Remove the radio from the cradle and install
it again.
4. If the malfunction persists, refer to your
Service Provider.
7Poor
communication.
1. Remove the radio from the cradle and install
it again.
2. Verify that the car roof antenna is not
damaged or broken.
3. Verify that the RF connector on the cradle is
not damaged or broken.
4. Verify that the RF antenna adapter on the
radio is not damaged or broken.
5. If the malfunction persists, refer to your
Service Provider.
Table 2: Troubleshooting Procedures
No. Malfunction Corrective Action