Operation Manual

15
English
GETTING STARTED
ADJUSTING THE RADIO’S VOLUME
• Turn the On-Off/Volume Control knob to adjust
the volume level.
SELECTING A RADIO CHANNEL
Your radio offers 16 channels, however some may
not be programmed. Check with your dealer for
more information
.
• Turn the Channel Selector knob clockwise or
counterclockwise until you reach the desired
channel indicated on the selector graduation.
SENDING A CALL
1. Use the Channel Selector knob to change to
the required channel.
2. Press the PTT button and speak clearly into the
microphone. Your mouth should be about 2.5 -
5cm away from the microphone.
3. Release the PTT button when you finish
speaking.
RECEIVING A CALL
1. Turn your radio on and adjust the volume level.
2. Switch to the desired channel.
3. If, at any time, a call is received, you will hear
the call at the volume level you have set.