User guide

SCAN
36
English
Note: The scan status annunciator, G, is
displayed when the scan operation is active. It
will be removed from the display when the scan
operation is terminated.
Deleting Nuisance Modes
When the radio scans to a mode you do not wish to
monitor (nuisance mode), you can temporarily delete
that mode from the scan list.
Note: Priority modes cannot be deleted.
Viewing a Scan List
(GP580 radios only)
The view scan list feature allows you to view the
members of the scan list associated with the currently
selected mode.
To view a scan list
3. Press the softkey
below the desired
scan state (on or off).
The radio returns to
the home display.
1. When your radio is locked on the mode to be
deleted, press the nuisance-mode delete
button (programmed via the CPS).
2. A valid-keypress chirp is heard, indicating
that the mode has been deleted.
3. The radio continues scanning the remaining
modes in the list.
4. To resume scanning the deleted mode, you
must leave and re-enter scan operation.
PLANT POLICE
1. Press / until
VIEW is displayed.
2. Press l (the soft-
key below VIEW).
3. Press ; (the soft-
key below SCAN).
The display shows
the first member of
the scan list.
For example
4. Every subsequent press of / will scroll
through subsequent members of the scan
list.
5. To leave the scan list feature, press the
HOME key, or the PTT switch, or turn the
mode selector knob.
6. The radio returns to
the home display.
PAGE STS VIEW
PHON SCAN CALL
FIRE DEPT
PLANT POLICE
UG_540_580 _EN.fm Page 36 Wednesday, August 14, 2002 10:13 AM