User`s guide

Direct Entry of the ID Number to be C all Alert

Paged (Cont.)

4. Press the PTT switch to send the ID number.

5a. If you hear one beep, it indicates that the ID number

has been received by the system, the radio you are

paging is not on the air, and your radio remains in

the Call Alert mode. You can either go back to step 3

and press the PTT switch to send the ID number

again, or press the (Home) button to return to

the home display.

Note:

• If after six seconds the called radio fails to

acknowledge the alert, a low-pitch alert tone sounds

and the display changes to “no rESP”. You may try

this sequence again.

5b. If you hear five beeps, it indicates that the ID

number has been received by the system, the radio

you are paging is on the air and has received your

page. The display shows “SCC” momentarily and

the radio automatically returns to the home display.

Call Alert™ Page Operation

(cont.)