High Definition Tuner User Guide Model HDT100

18
AUTO SCAN
Before you can start using the HDT100, you need to program it with the
station numbers of the over-the-air digital TV stations available in your
area. This can be done by simply running auto scan from the HDT100’s
on-screen menu.
You can navigate the on-screen menu from the HDT100’s front panel or
by using the remote control:
Use the ! and "arrow keys to move up and down the on-screen
menu
Use the
SELECT button to select the highlighted item on the
on-screen menu
Use the
EXIT button to return to the main menu from a submenu or
to leave the main menu
To run auto scan:
1 Press the POWER button on the HDT100 front panel or remote control
to turn on the receiver.
2 Press MENU on the remote control or MENU/ENTER on the front panel.
The Menu screen is displayed:
3 Using the "arrow key, highlight Installation and press SELECT. The
Password window is displayed.