High Definition Tuner User Guide Model HDT100

31
6 Press EXIT twice to exit the on-screen menu.
If the HDT100 is unable to lock on the channel’s signal, a “Time out
error” message is displayed. Adjust the antenna’s position and try adding
the channel again.
Customizing the On-Screen Menu and i-Banner
To change the transparency of the on-screen menu:
1 Press MENU on the remote control or MENU/ENTER on the front panel.
The Menu screen is displayed.
2 Highlight Menu Setup and press SELECT. The Menu Setup menu is
displayed.
3 Highlight Transparency and press SELECT. The transparency
indicator bar is displayed.
4 Use the # and $ keys to change the transparency of the on-screen
menu.
5 When finished, press EXIT twice to exit the on-screen menu.
To configure how your i-Banner is displayed:
1 Press MENU on the remote control or MENU/ENTER on the front panel.
The Menu screen is displayed.
2 Highlight Menu Setup and press SELECT. The Menu Setup menu is
displayed.
3 Highlight i-Banner Setup and press SELECT. The i-Banner Setup
window is displayed.
4 Use the ! and " keys to select an item. Press the # and $ keys to
change a setting:
Fading Mode
Fade Out or No Fade
Display Time
1 – 10 seconds
Time Format
AM/PM or 24 hr
5 When finished, press EXIT twice to exit the on-screen menu.