Owner`s manual

7
Overview
Overview
General
The MICOM-2ET-RDP is an advanced transportable HF digital signal processing
communication system, intended for a very wide range of radio communications.
Packed in a rugged suitcase, the MICOM-2ET-RDP provides a highly
sophisticated solution for voice, data, fax and e-mail transfer, while remaining
reliable and simple to operate. The MICOM-2ET-RDP contains fully solid-state
components of the highest integration density and of state-of-the-art modules
with the latest SMD (Surface Mounted Devices) technology.
The MICOM-2ET-RDP is a self-contained communication system with a radio,
AC/DC power supply, and antenna, enabling rapid setup of communications in
almost any conditions, and operating in the 1.6-30 MHz frequency range with a
power output of 125 W PEP and average for voice and data operation.
The radio control head is detachable, enabling flexibility in different operational
conditions.
Options
The MICOM-2ET-RDP is based on the MICOM-2ET Trunk Mount Mobile
Radio, model M81AMN0KV5-K and is available with two conversion kit
options: G580 (FLN2615) or G581 (FLN2620).
G580 – this kit includes a built-in detachable tuner and a long-wire antenna.
G581 – this kit is used with a tactical broadband antenna and does not include a tuner.
In addition, the following options can be ordered:
• RS232 remote control interface
• Linear amplifier interface
• Phone patch interface
• Data/fax modem interface
• Interlink interface
• RSS for PC
• High (0.1 PPM) frequency stability