Southern LINC iDEN Digital Multi-service Data-capable Phone i325 Phone User’s Guide @NNTN5837A@ NNTN5837A
IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONE The SIM card provided in this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr , i58sr, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series. For more information on SIM card compatibility, go to www.motorola.com/iden/support.
Contents Getting Started........................................... 1 Removing the Battery Door ...............................2 Locating Your SIM Card ....................................3 Activating Service..............................................6 Antenna .............................................................6 Maintaining Durability ........................................6 Powering On and Off.........................................6 Enabling Over-the-Air Security..........................
Editing Entries .................................................36 Deleting Entries ...............................................36 Checking Capacity ..........................................37 Creating Pauses and Waits.............................37 International Numbers .....................................37 Accessing Contacts with GSM Phones ...........38 Call Forwarding........................................ 39 Forwarding All Calls ........................................
Voice Mail Messages ............................... 60 Receiving a Message ......................................60 Accessing Voice Mail from the Message Center ...................................60 Sending Unanswered Calls to Voice Mail .......60 MOSMS Messages ................................... 61 Setting Up........................................................61 Receiving a Message ......................................61 Reading from the Message Center .................
Customizing Your Phone ........................ 90 Using a Headset .....................................102 Setting the Volume ..........................................90 Setting Your Phone to Not Ring ......................90 Seeing the Display Better................................91 Using Settings .................................................91 Attaching a Headset......................................102 Using a Remote PTT Button Button ..............102 Profiles ................................
MOTOROLA LIMITED WARRANTY ...... 116 Limited Warranty Motorola Communication Products (International) ..................................... 120 Patent and Trademark Information ...... 124 Index ....................................................... 125 Driving Safety Tips ................................
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i325 Model Number: H68XAH6RR1AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules.
Getting Started volume controls audio jack p Power button. Navigation key — press the arrows to scroll through menus and lists. Push-To-Talk (PTT) button speaker (in back) m Menu key — accesses context-sensitive menus. A Option key — selects the option appearing above it on the display. s Send key — places phone calls. e End key — ends phone calls; returns to idle screen.
Getting Started To start using your i325 phone: • • • • Note: If the release button does not slide forward to release the battery door, rotate the circular piece in the center of the release button to unlock it. Make sure your SIM card is in place. Charge the battery. Activate your service. Enable security. Removing the Battery Door 1 Make sure the phone is powered off. See “Powering On and Off” on page 6. 2 Slide the release button forward until it releases the battery door.
Locating Your SIM Card Locating Your SIM Card Battery Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your phone, underneath the battery. Inserting the Battery 1 Remove the battery door. 2 Insert the top of the battery into the battery area. Press the bottom of the battery to secure it.
Getting Started 4 If you want to ensure the battery door does not accidentally come off, rotate the circular piece in the center of the release button to lock it. 3 Plug the other end of the charger into the accessory connector. Charging the Battery Your phone comes with a standard travel charger. 1 Plug the charger into an electrical outlet. 2 Open the connector cover. connector cover 4 Charger Attached appears on the display.
Locating Your SIM Card Charging Times See your battery and charger to determine the appropriate charging time. Battery 2 Remove the battery by pushing the battery toward the antenna and lifting it out. Charger Rapid Mid-Rate High 2 hours Performance 4 hours Extra Capacity 2.5 hours 6 hours Maximum Capacity 3.5 hours 7.5 hours For best results, charge the batteries within the temperature range of 50°F to 104°F (10°C to 40°C). Prolonged charging is not recommended.
Getting Started Activating Service Removing the Antenna The first time you power on your phone, you must be in your local calling area. This activates your service. 1 Grip the antenna firmly and turn it counter-clockwise until it is loose. 2 Remove the antenna from the antenna socket. Antenna Maintaining Durability Attach the phone antenna before using your phone. The antenna must be screwed in completely for proper operation and water resistance.
Enabling Over-the-Air Security If the Enter SIM PIN Code screen appears, enter your SIM PIN. See “Entering the PIN” on page 12. Press A under Ok. Enabling Over-the-Air Security When you receive your phone, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card (see “Changing the PIN” on page 12).
Getting Started To accept programming: 1 When you receive a Net alert saying New Browser Message - Receive Programming Info, press A under Goto. 2 You are prompted to accept changes to your lists. Press A under Ok. 3 If you are prompted again to accept changes to your lists, press A under Ok. 4 A confirmation screen displays. Press A under Ok. 5 Press e to return to the idle screen.
Phone Basics Phone Basics Display Options Any time your phone is powered on, the display provides you with information and options. Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it. status icons Menus and Lists b text area Your phone’s features are arranged in menus, submenus, and lists. menu icon To access the items in a menu or list, scroll using the navigation key at the top of your keypad.
Getting Started Menu Key f Call Forward Set call forwarding options. See page 39. g Memo Store a number to access later. See page 50. h Call Timers Phone usage information. See page 46. All your phone’s features can be accessed through the main menu. When you are using a feature, the icon for that feature appears in the upper left corner of the display. i Recent Calls Lists recent calls. See page 30. c Shortcuts Create shortcuts to screens. See page 100. a Browser Apps Browse the Web.
Phone Basics m C Talkgroup In Use — Your phone is active on a group call. 12 Active Phone Line — 1 indicates phone line 1 is ready to make calls; 2 indicates phone line 2 is ready to make calls. m LINCaround — Your phone is set to LINCaround mode. S Scan — Your phone is set to receive Group calls from all the Talkgroups in a Hub. T Talkgroup Icon — Your phone is active as a group call Battery Strength — More bars on the battery indicate a greater charge.
Getting Started D Internet — You are ready to browse the internet. YZ Packet Data — You are ready to transfer packet data or are transferring packet data. See “Using Your Phone as a Modem” on page 47. P Roaming — You are using your phone outside your carrier's network. SIM Card Security Your SIM card protects your personal information. The SIM card stores all your Contacts information.
SIM Card Security Turning the PIN Requirement On and Off When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone. Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency phone calls. When the PIN requirement is off, your phone can be used without entering a PIN. Important: When the SIM PIN requirement is off, the personal data on your SIM card is not protected.
Getting Started Inserting and Removing Your SIM Card Important: Do not touch the gold-colored areas of your SIM card. Switching SIM Cards Moving your SIM card from one phone to another moves all your Contacts information, but erases other information.
Locking the Keypad Locking the Keypad Removing Your SIM Card Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary. 1 With your phone powered off, remove the battery door and battery. 2 While holding the tab down, slide your SIM card out of the SIM card holder. SIM card holder Locking the phone’s keypad prevents its buttons from being pressed.
Getting Started Accessories To order accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer. For More Information If you have questions about your i325 phone, contact your sales representative or your service provider.
Making Calls Receiving Calls Your i325 phone makes two types of calls: digital cellular phone calls and Private calls. With Private calls, you use your phone as a long-range, digital walkie-talkie. Phone Calls Phone Calls 1 Enter the number you want to call. 2 Press s to place the call. 3 Press e to end the call. Private Calls 1 Enter the Private ID you want to call. 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.
Making Calls 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound. 3 Release the PTT button to listen. Call Icons When you make a call, call icons appear in the text area of the phone’s display. X Placing a phone call.
Ways to Enter Calls To select a number from the recent calls list as the number you want to call: 1 From the idle screen, scroll down. -orFrom the main menu, select Recent Calls. 2 Scroll to the name or number you want to call. From Contacts If you have numbers stored in Contacts, you can use these numbers to make calls. For information on entering numbers into Contacts, see “Creating Entries” on page 34. Calling from the Contacts List 1 From the main menu, select Contacts.
Making Calls Using a Voice Name Note: This is an optional feature. Contact your service provider about its availability for purchase. If you have created a voice name in Contacts for the number you want to call, you can say the voice name into your phone to enter the number. See page 33 for more information about voice names. To use a voice name: 1 Press and hold t until a prompt appears telling you to say the voice name.
Using Mute To turn speakerphone on or off: Press under A under Spkr. -orPress t. Using Mute Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. To turn mute on: Press A under Mute. While mute is on, Unmute appears as a display option. To turn mute off: Press A under Unmute.
LINCaroundSM LINCaround allows direct two-way phone-to-phone communications between two or more phones equipped for LINCaround. You can make and receive LINCaround calls even when network service is not available. You can talk to anyone on your code and channel within your range. LINCaround allows you to: • Use code or private mode operation • Use up to 10 channels • Communicate with standalone LINCaround radios Note: LINCaround is not compatible with older Family Radio Services products.
Channels and Codes Exiting LINCaround To set your phone to network mode when LINCaround is active: 1 From the LINCaround idle screen, press m. 2 Scroll to LA Options and press A under Select. 3 Select Exit LINCaround. Switching to Network Please Wait displays. After a few seconds, the network idle screen appears. Talk Range Phones used in LINCaround mode should be a minimum of 6 feet apart to maximize performance and improve transmission range. Channels and Codes Your phone has 10 channels and 15 codes.
LINCaroundSM Making and Receiving Code Calls in LINCaround To make a code call in LINCaround: 1 Press and hold the PTT button. LA Transmit appears on the first line of display. Begin speaking after your phone emits the LINCaround tone. 2 Release the PTT button to listen. The tone emitted from your phone when using LINCaround is 4 beeps and sounds different from the standard tone heard with on-network Private and group calls.
Private LINCaround Calls Private LINCaround Calls You can have a private conversation with another person using LINCaround. When on a private LINCaround call, no other parties can hear your conversation. In order to make a private LINCaround Call, you must use the valid 10-digit Personal Telephone Number (PTN) of the person you are calling. The person you are calling must be in LINCaround and set to the same channel to receive your call.
LINCaroundSM Ending a private LINCaround Call 2 Select Setup. A private LINCaround call will end if there is no communication for 6 seconds. To access Setup Options in LINCaround: Note: A private LINCaround call may be interrupted during the 6 second idle time by another code call or private call. The display will return to the LINCaround idle screen. 1 From the main menu, select LA Options. 2 Select Setup.
Setup Options To turn off Direct Launch: 1 From the Setup screen, scroll to Direct Launch and press A under Change. 2 Select Off. Your phone now displays LA Options when you select LINCaround from the main menu. Using State Tone To set your phone to notify you with a tone that you are in LINCaround: 1 From the Setup screen, scroll to State Tone and press A under Change. 2 Select the time frame during which you want to be notified that you are in LINCaround.
Call Alerts Receiving Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a Private call. When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or Private calls until you do. When you send a call alert, the recipient’s phone emits a series of beeps, or vibrates, and displays your name or Private ID.
Using the Call Alert Queue Viewing Date and Time Deleting Call Alerts To view the date and time a call alert was received: To delete a call alert from the queue: 1 2 3 4 1 From the call alert queue, scroll to the call alert you want to delete. 2 Press m. 3 Select Delete. 4 Press A under Yes to confirm. From the main menu, select Call Alert. Scroll to the call alert you want information on. Press m. Select View.
Recent Calls The recent calls list stores the numbers of the 20 most recent calls you have made and received. To view the recent calls list: 1 From the idle screen, press the down arrow on the navigation key. -orFrom the main menu, select Recent Calls. 2 Scroll through the list. If the number of a recent call is stored in Contacts, the name associated with the number appears on the recent calls list. An icon appears beside the name or number indicating the Contacts type of the number used in the call.
Deleting Recent Calls 3 To store the number as a new entry, select [New Contact]. -orTo store the number to an existing entry, select the entry. 4 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign to the number. For information on Contacts types, see page 32. 5 If you want to add more information to the entry, follow the applicable instructions in “Creating Entries” on page 34. 6 Press A under Done.
Contacts • A Contacts type — Each number or address stored must be assigned a Contacts type: Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. A Mobile phone number Private Private ID Information stored in Contacts is saved on your SIM card. B C Work1 phone number A Contacts entry contains: D Work2 phone number • A name — A name is required if you are storing more than one number or address to the entry; otherwise, it is optional.
Viewing Contacts Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 37. • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it. • A voice name — If you create a voice name for a number, you can then dial that number by saying the voice name into your phone.
Contacts Showing Only Private IDs and Groups To set Contacts to show only entries that contain Private IDs and entries for Talkgroups and Hubs: 1 From the Contacts list, press m. 2 Select Filter. 3 With Prvt/Grp/Hub highlighted, press A under Select. To set Contacts to show all entries: 1 From the Contacts list, press m. 2 Select Filter. 3 With Show All highlighted, press A under Select. Creating Entries A number or address and a Contacts type are required for all Contacts entries.
Creating Entries Scroll to the Contacts type you want to assign. Press A under Select. 5 To store a number or address: With the # field highlighted (or ID for an email address, or IP for an IP address), press A under Change. Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see “Entering Text” on page 55. Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo. When you are finished, press A under Ok.
Contacts Storing Numbers Faster Editing Entries To store numbers to Contacts from the recent calls list, see “Storing Recent Calls to Contacts” on page 30. 1 From the Contacts list, scroll to the entry you want to edit. 2 Press m. 3 Select Edit. The entry details screen displays. 4 Follow the applicable instructions in “Creating Entries” on page 34 to edit the various fields. To store numbers to Contacts from Memo, see “Memo” on page 50.
Checking Capacity 4 Scroll to Delete Number. 5 Press A under Select. 6 Press A under Yes to confirm. Note: If an entry contains only one number or address, deleting the number or address deletes the entry. If you store 17035551235P1234, when you select this number and make a call, your phone dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits. Checking Capacity To program a wait: To see how many numbers are stored in Contacts: 1 From the Contacts list, press m.
Contacts When storing a number that you plan to use for international calls, use Plus Dialing: 1 Press and hold 0 for two seconds. A “0” appears, then changes to a “+”. Note: The network translates the “+” into the appropriate international access code needed to place the call. 2 Enter the country code, city code or area code, and phone number. For information about making international calls, see “Making International Calls” on page 44.
Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: L Phone line 2 is active; calls to phone lines 1 and 2 are being forwarded.
Call Forwarding Tip: In some fields, you can select an option by scrolling left or right instead of pressing A under Change. Turning Off Call Forwarding If you don’t want all your calls forwarded, turn the feature off: 1 2 3 4 5 6 7 From the main menu, select Call Forward. Press A under Change. Select All Calls. Scroll to To. Press A under Change. Scroll to Off. Press A under Select. All your calls are now sent to your phone. Calls you miss are forwarded according to the options set for missed calls.
Viewing Call Forwarding Settings Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 8 Press A under Ok. 9 Repeat step 4 through step 8 for If No Answer and If Unreachable. When you are finished, press A under Back. Viewing Call Forwarding Settings 1 2 3 4 5 6 From the main menu, select Call Forward. Press A under Change. Select All Calls. Scroll to To. Press m. Select Retrieve Status.
Additional Calling Options Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. Switching Between Calls When you accept a second call, the display shows the name or number of each call, with an icon indicating which call is active: Y Phone call is active. Z Phone call is on hold.
Call Hold To turn off Call Waiting for the next call you make or receive: To end the second call and make the call on hold active again: 1 From the main menu, select Settings > Phone Calls > Call Waiting. 2 Press A under Change. 3 Scroll to Off. 4 Press A under Select. To make the call on hold active and put the active call on hold: Call Waiting is turned back on when you end the call. Call Hold Call Hold lets you put an active call on hold and make a second call.
Additional Calling Options Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For more information on pauses and waits, see “Creating Pauses and Waits” on page 37. To create a pause while dialing a phone number: 1 From the keypad, enter the digits you want to occur before the pause. 2 Press m. 3 Select Insert Pause. 4 Enter the digits you want to occur after the pause. Making International Calls Note: This feature may not be offered by your service provider.
Group Calls To set your phone to call a Private ID you choose: 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT > Assigned Number. 2 To enter the Private ID you want your phone to call every time you press the PTT button: Enter the number using your keypad. -orPress A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. Tip: If you are entering a Talkgroup number, enter # before the number. 3 Press A under Ok.
Additional Calling Options Making Group Calls 4 Press A under Select. 1 Press #. Then enter the Talkgroup number using the keypad. -or- Call Timers Choose the Talkgroup name from Contacts or recent calls list. 2 Proceed as if making a Private call. Receiving Group Calls To answer a group call: Proceed as if answering a Private call. Only one person at a time may speak on a group call. The Private ID or name of the person who is speaking will appear on the display below the Talkgroup number.
Using Your Phone as a Modem To view or reset a timer: 1 From the main menu, select Call Timers. 2 Select the feature you want to view or reset. 3 To view a feature without resetting: Press A under Done when you are finished viewing. -or- 1 Open the connector cover. connector cover To reset a feature: Press A under Reset. Press A under Yes to confirm. Note: The values displayed by Call Timers should not be used for billing. Call timers are estimates only.
Additional Calling Options • Circuit data — used for sending and receiving faxes and for transferring large files • Packet data — used for small file transfers such as email When you make a TTY call, these icons appear on the phone’s display: To use these services, you must install the iDEN Wireless Data Services software (available separately).
Making TTY Calls • HCO (Hearing-Carry-Over) — You type text on your TTY device and listen to voice replies on your phone speaker. To change mode while not in a call: 1 From the main menu, select Settings > Phone Calls > TTY > Type. 2 Press A under Change. 3 Scroll to the TTY mode you want. 4 Press A under Select. Important: When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear.
Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press A under Store. To view the memo later: 1 From the main menu, select Memo. To delete the memo: 1 From the main menu, select Memo. 2 Press and hold A under Delete. 3 Press A under Store. To edit the memo: 1 From the main menu, select Memo. 2 Enter the new number. 3 Press A under Store.
Ring Tones Setting Your Phone to Vibrate To set the ring tone your phone makes when you receive phone calls, message notifications, or call alerts: If your phone includes a vibrate feature, you can set your phone to vibrate when you receive phone calls, Private calls and group calls, messages notifications, or call alerts. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll or is SilentAll set to Off. 3 Scroll through the list of ring tones and select the one you want to assign.
Ring Tones Never Ring 1 From the main menu, select Ring Tones > SilentAll. 2 Scroll left or right to set SilentAll to On. Always Vibrate Instead of Ringing If your phone includes a vibrate feature: 1 From the main menu, select Ring Tones > VibeAll. 2 Scroll left or right to set VibeAll to On. Tip: Pressing the volume controls to turn down the volume as far as possible sets VibeAll to On.
Assigning Ring Tones to Contacts Assigning Ring Tones to Contacts You can set the ring tone your phone makes when you receive phone calls or call alerts from someone you have stored in Contacts. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll or SilentAll is set to Off. 3 Scroll through the list of ring tones to the one you want to assign. Highlighting a ring tone lets you hear it. 4 Press A under Assign. 5 Select A Contact. 6 Scroll to the Contacts entry you want to assign the ring tone to.
Ring Tones Note: Ring tones are stored in your phone using the same memory space used to store voice records. Deleting voice records frees memory space for ring tones. Deleting Custom Ring Tones To delete a custom ring tone: 1 2 3 4 5 6 From the main menu, select Ring Tones. Make sure VibeAll or SilentAll is set to Off. Scroll to the ring tone you want to delete. Press m. Select Delete. Press A under Yes to confirm.
Entering Text You can enter text into your phone using the traditional method of pressing a key several times for each character, or by pressing a key once for each letter while words likely to be the one you want are chosen from a database. You can also enter symbols and numbers into a text field. In screens that require you to enter text, you see the following icons near the top right corner. These icons tell you which text input mode you are using: l Alpha — Press a key several times for each character.
Entering Text 2 Type a word by pressing one key for each letter. For example, to type “test” press 8 3 7 8. The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3 If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears.
Using Numeric Mode These icons appear in the top row of your display: Using Symbols Mode m Shift is on. 1 Select Symbols as your text input mode. n Caps lock is on. When neither of these icons appear, letters typed are lowercase. Note: Your phone automatically makes the first letter of a sentence uppercase. A row of symbols appears along the bottom of your phone’s display. Scroll right to view the complete row. 2 Scroll left or right to choose the symbol you want to enter. 3 Press A under Select.
Messages You can receive the following types of messages on your phone: • Voice mail messages • Short Message Service (SMS) text messages • Depending on your service provider, you may have the option to receive fax mail and Net alerts. If you dismiss the notification, the message is not deleted. It can be accessed through the message center.
Message Center Message Center The message center manages your messages. All your messages are stored in the message center. The message center shows how many messages you have of each type. To access your messages through the message center: 1 From the main menu, select Messages. 2 Scroll to the type of message you want to access. 3 Press A under the display option on the left.
Voice Mail Messages Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Receiving a Message When you receive a voice mail message, New Voice Mail Message appears on the display. To call your service provider’s voice mail system and listen to the message: Press A under Call. To dismiss the message notification: Press A under Back. This icon y appears on the display, reminding you that you have a new message.
MOSMS Messages Note: This feature may not be offered by your service provider. If your service provider offers MOSMS, your phone sends SMS messages using MOSMS and receives SMS messages from other phones that are using MOSMS. Setting Up Before you begin using MOSMS, you may need to set up your signature, service center number, and expiration information: 1 2 3 4 5 From the main menu, select Messages. Scroll to Text Inbox. Press m. Select Text Msg Setup.
MOSMS Messages To delete the message, scroll to the end of the message and press A under Delete. To dismiss the message notification: Press A under Exit. This icon w appears on the display, reminding you that you have a new message. If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.
Creating and Sending Messages under Select. For more information on quick notes, see “Using Quick Notes” on page 64. To delete the message without sending it: Press m. Scroll to Delete. Press A under Select. If you want to add your signature: Press m. Select Add Signature. Tip: In some fields, you can select an option by scrolling left or right instead of pressing A under Change. When you are finished, press A under Ok. 5 If you want to send the message, press A under Yes.
MOSMS Messages 3 Select Compose SMS. The message is automatically addressed to the phone number you chose. 4 Follow step 4 through step 8 of “Creating and Sending Messages” on page 62. Using Quick Notes Quick notes are short, pre-written text messages that you can create, edit, and send. You can store up to 20 quick notes. A quick note may be up to 30 characters long. To create a quick note: 1 From the main menu, select Messages > Quick Notes > [New Quick Note]. 2 Press A under Create. Enter text.
Creating and Sending Messages These icons appear next to messages in the outbox: Deleting Sent Messages 5 Sent and confirmed. 9 Send attempted. 0 Forwarded. 4 Received by addressee. 6 Not received by addressee. 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to delete. 3 Press m. 4 Select Delete. 5 Press A under Yes to confirm. 8 Send failed. 7 Re-sent. R Locked.
MOSMS Messages Scroll to Unlock to unlock the message. 5 Press A under Select. Managing Memory Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages. The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some. The outbox and drafts folder share memory space. Together they can hold 30 messages. If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some.
Advanced Features Note: These features may not be offered by your service provider. Your sales representative or your service provider establishes Talkgroups and Hub for you. You can choose a name for each when you create entries for them in Contacts. Group Calls, Talkgroups, and Hubs Joining a Hub A group call is similar to a Private call, but is made to all members of a Talkgroup at once. A Talkgroup is a predetermined group of your service provider’s customers.
Advanced Features 2 Assign the Hub Contacts type to the entry. 3 Assign the Talkgroup number as the number of the Hub. Making Group Calls This creates a Hub with the same number as the Talkgroup it contains. You cannot add any more Talkgroups to this Hub. 1 Press #. Enter the Hub number using the keypad. -or- You make calls using the primary Talkgroup in a Hub. Scroll to the Hub name in Contacts or recent calls list.
Emergency Group Calls Setting Talkgroup Scan To set your phone to receive group calls from all the Talkgroups in a Hub: 1 From the main menu, select Settings > 2-Way Radio > Scan. 2 Press A under Change. 3 Scroll to On. 4 Press A under Select. To set your phone to receive group calls only from the primary Talkgroup in a Hub: Scroll to Off in step 3. Tip: You can also set this option from Contacts, from the recent calls list, or after you begin entering a number using the keypad: Press m.
Advanced Features Unlike other group calls, pressing the PTT button does not start an Emergency Group call. Pressing T starts the call. Pressing the PTT button lets you begin talking. Emergency Group calls you receive do not appear in the recent calls list. To make an Emergency Group call: Isolated Operation lets you continue to make and receive group calls on the Hub you last used, within a limited coverage area, even if you lose network coverage.
Call Alert Status Messages Call Alert Status Messages Receiving a Call Alert Status Message You can send call alerts that include text messages up to 10 characters long. These messages are stored on your SIM card when your receive your phone. There are 10 you can choose from. When you receive a call alert that includes a text message, the text message appears as the part of of the call alert information when you receive the call alert and in the recent calls list.
Java Applications Running Applications Your phone arrives with Java applications loaded and ready to install. You can download and install more Java applications. To run an application that has a shortcut on the main menu: Note: Using Java applications may cause your phone to use up more battery power than other uses of your phone. 1 From the main menu, select the application or suite of applications you want to run.
Resuming Applications Press e. Tip: You can also end applications from the Suspended Apps screen. To view your suspended applications: From the Java menu, scroll to Suspended Apps and press A under Open. You can have up to 3 applications running at one time — 1 running in the foreground and 2 in the background. Resuming Applications You can resume a suspended application at any time. This brings it to the foreground. 1 From the Java menu, scroll to Suspended Apps and press A under Open.
Java Applications 5 Press A under Yes to confirm. 6 When your phone has finished deleting the application, press A under Done. To delete all Java applications: 1 2 3 4 5 From the main menu, select Java Apps. Scroll to Java System. Press m. Select Delete All. Press A under Yes to confirm. Managing Memory To view the amount of memory available for Java applications: 1 From the main menu, select Java Apps > Java System. 2 Press A under Next. 3 To see more memory information, press A under Next again.
Java Applications and GPS Enabled 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to remove the shortcut for. 4 Press A under Remve. 5 Press A under Done. Java Applications and GPS Enabled Some Java applications can make use of your phone’s GPS feature to determine the approximate geographical location of your phone. (See “GPS Enabled” on page 78 for more information on the GPS feature.
Java Applications When a Java application requests access to the location of your phone, a screen appears informing you. • For this session — If the application requests access to the location of your phone again before you power off your phone, the request is granted without notifying you. • Only Once — If the application requests access to the location of your phone again, you are prompted to grant or deny permission. To deny this request: 1 Press A under Deny.
Java Applications and GPS Enabled • Always — The application always has permission to access the location of your phone, without notifying you. • Ask — When the application requests access to the location of your phone, you are prompted to grant or deny permission (see “Granting or Denying Permission” on page 75). • Never — When the application requests access to the location of your phone, the request is denied without notifying you.
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
Making an Emergency Call • When your GPS antenna is covered (for example, by your hand or other object) or facing the ground • In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate.
GPS Enabled GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center. In some cases, your local 911 emergency response center may not be equipped to receive GPS location information.
Enhancing GPS Performance • The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Rfrsh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites. For tips on getting the best location calculation, see “Enhancing GPS Performance”.
GPS Enabled To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location: • Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.
Updating Satellite Almanac Data Note: Although moving your phone at a walking pace decreases GPS performance, moving it at the speed of a moving car does not. • Stay in network coverage. Depending on who your service provider is, the network will provide your phone with information that helps determine your location more quickly and accurately. Updating Satellite Almanac Data Another way to keep the GPS feature of your phone working well is to keep your satellite almanac data up to date.
GPS Enabled • By Permission — When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator. Note: Privacy options do not apply to the transmission of location information during emergency 911 calls. To turn the GPS Enabled security feature on or off: To set your GPS privacy options: 5 Press A under Ok. 1 From the main menu, select GPS > Privacy.
Using GPS with Map Software Using GPS with Map Software Software Compatibility You can use the GPS feature of your phone to provide approximate location data to a laptop computer or similar device that is running interactive map software such as that made by DeLorme or Microsoft. This way, if your phone has good access to GPS signals, your approximate position on a map can be made available as you travel in a vehicle.
GPS Enabled 2 With the phone’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click. To set your phone to send location information to your laptop or other device: 1 From the main menu, select GPS > Interface. 2 With NMEA OUT highlighted, press A under Change. 3 Scroll to On. 4 Press A under Select. Your phone is now sending location data to your laptop or other device.
Voice Records Note: This is an optional feature. Contact your service provider about its availability for purchase. A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records To record a note to yourself: 1 From the main menu, select VoiceRecord. 2 With [New VoiceRec] highlighted, press A under Record. 3 Say the message you want to record into the microphone.
Voice Records Labeling Voice Records 5 Press A under Yes to confirm. When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label. Locking Voice Records 1 2 3 4 From the main menu, select VoiceRecord. Scroll to the voice record you want to label. Press m. Select Label. Enter the label you want to assign. See “Entering Text” on page 55. 5 Press A under Ok.
Managing Memory To free more memory by deleting all unlocked voice records: 1 From the voice records memory screen, press A under Delete. 2 Press A under Yes to confirm. Note: Voice records are stored in your phone using the same memory space used to store messages, Java application data, and ring tones. Deleting some of these other items frees memory for voice records.
Customizing Your Phone volume of the phone’s ring when you get a call on that line. Setting the Volume See “Volume Features” on page 92. To set the volume of the sound coming from the phone’s earpiece or speaker: Setting Your Phone to Not Ring 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -orScroll to Speaker to set the speaker volume. 3 Press A under Change. 4 To select the volume: Scroll left or right. -orPress the volume controls.
Seeing the Display Better If your phone does not include a vibrate feature, you can still set your phone to make no sound. Scroll to Silent in step 3. Seeing the Display Better To set the contrast of the display: 1 From the main menu, select Settings > Display/Info > Contrast. 2 Press A under Change. 3 Scroll left or right to set the contrast. 4 Press A under Ok. Using Settings Settings contains many submenus that let you customize your phone.
Customizing Your Phone • Call Duration — causes the duration of a call to appear on the phone’s display when the call ends. • TTY — lets you use your phone with a TTY device. See “Making TTY Calls” on page 48. • Notifications — See “Message Notifications” on page 58. 2-Way Radio Features The 2-Way Radio menu controls how your phone handles Private calls and group calls: • Scan — controls whether your phone receives Group calls from all the Talkgroups in a Hub. See “Setting Talkgroup Scan” on page 69.
Using Settings • Messages — sets the volume of message notifications. • Earpiece — sets the volume of sound coming out of the earpiece. • Speaker — sets the volume of sound coming out of the speaker. • Keypad — sets the volume of sound associated with pressing keys and buttons. • Java Earpiece — sets the volume of sound associated with Java applications coming out of the earpiece. • Java Speaker — sets the volume of sound associated with Java applications coming out of the speaker.
Customizing Your Phone • Connectivity — Network ID sets the phone’s network IDs and their roaming options under the direction of your service provider; Master Reset lets your service provider reset your service in the event of a security or provisioning problem. • Reset Defaults — Reset Settings returns all settings to their original defaults; Reset All returns all settings to their original defaults and erases all stored lists. Use only under the direction of your service provider.
Profiles Viewing Profiles A profile is a group of settings saved together so that you can apply them to your phone easily. To view the profiles stored in your phone: A profile contains these settings: • Ring Tones — sets all options described in “Ring Tones” on page 51, except assigning ring tones to Contacts. • Display/Info — sets Color Palette and Backlight options. See “Display/Info Features” on page 91. • Phone Calls — sets Set Line and Auto Ans options. See “Phone Calls Features” on page 91.
Profiles Surveillance Profile During Surveillance profile the following features will be disabled: • • • • • screen backlight keypad backlight speaker audio ringtones all vibration This setting is designed for public safety use with an earbud or headset only. Note: Earbuds and headsets are sold separately. See “Accessories” on page 16.
Temporary Profiles Temporary Profiles If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles. A temporary profile is based on the profile in effect when you made the changes, but reflects the changed settings. Making more changes further updates the temporary profile, for as long as it is in effect.
Profiles Tip: You can begin entering text from the keypad instead of pressing A under Change. Deleting Profiles When you are finished, press A under OK. 1 From the main menu, select Profiles. 2 Select the profile you want to delete. Note: A temporary profile is automatically deleted when the profile it is based on is deleted. 4 If you want to base this profile on an existing profile: With Copy From highlighted, press A under Change. Select the profile you want to base this profile on.
Setting Call Filtering To set call filtering: 1 While setting options for a profile, select Call Filter. 2 To set filtering options for phone calls, scroll to Phone and press A under Change. • Off sets your phone to notify you of all phone calls. • All sets your phone to ignore all phone calls. • All Contacts sets your phone to notify you only of phone calls from numbers stored in Contacts. • Some Cntcs sets your phone to notify you only of phone calls from numbers you select from Contacts.
Shortcuts Shortcuts lets you access most menu options by pressing a number on your keypad (1 through 9) or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. Creating a Shortcut Note: When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts. 1 Go to the menu item you want to create a shortcut for.
Editing a Shortcut If you do not know the shortcut number: 1 From the main menu, select Shortcuts. 2 Scroll to the shortcut you want to use. -orIf you assigned a voice name to the shortcut: Select Voice Recog from the main menu. As directed by the screen prompt, say the name of the shortcut into the microphone. The name of the shortcut will be repeated back to you and the shortcut with that voice name will be highlighted. Note: This is an optional feature.
Using a Headset If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time: 1 From the main menu, select Settings > Advanced > Headset/Spkr. 2 Press A under Change. 3 Scroll to HdsetOnly to send incoming sound to the headset only. -orSelect Hdset&Spkr to send incoming sound to the headset and ring tones to the speaker. 4 Press A under Select.
Understanding Status Messages Status Messages Message Description System Busy The system is experiencing heavy traffic. Please try again later. You may receive status messages under certain conditions. Before contacting Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. Please Try Again An error occurred. Please try again.
Understanding Status Messages Status Messages Message Description Enter SIM PIN Please enter your 4 to 8-digit SIM PIN code. Enter Unlock Code Auto Phone Lock is activated. Enter you unlock code. New Browser Message Memory Full! Warns of low memory for Net Alerts. Scanning for Satellites Searching for GPS satellites. Unable to Locate Sats Could not find GPS satellites. Technical Error A problem occurred in your phone’s GPS circuitry.
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO. RF Operational Characteristics Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.
Safety and General Information Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone. Two-way radio operation When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.
Portable Radio Product Operation and EME Exposure ALL MODELS WITH FCC ID AZ489FT5830 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Safety and General Information Electro Magnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so.
Operational Warnings Other Medical Devices Potentially Explosive Atmospheres If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
Safety and General Information Operational Cautions Batteries ! All batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.
Intrinsically Safe Radio Information Intrinsically Safe Radio Information The Intrinsically Safe Approval unit refers to a product that has been approved as intrinsically safe by an approval agency (for example FM, CSA) and certifies that a particular product meets the Agency's applicable Intrinsic Safety standards for specific types of hazardous classified locations.
Safety and General Information Warnings for Radios Approved as Intrinsically Safe Portable radio products must ship from the Motorola manufacturing facility with the hazardous atmosphere capability and the intrinsic safety approval labeling (FM, CSA, CEPEL, etc). Portable radio products will not be upgraded to this capability and labeled once they have been shipped to the field. A modification changes the unit’s hardware from its original design configuration.
Intrinsically Safe Radio Information Repair ! REPAIRS FOR MOTOROLA PRODUCTS WITH INTRINSICALLY SAFE APPROVAL ARE THE RESPONSIBILITY OF THE USER. Repairs to a Motorola FM approved radio product should only be done at a location that has been FM audited under the FM 3605 repairs and service standard. Contact Motorola for assistance regarding repairs and service of Motorola intrinsically safe equipment.
Safety and General Information will void the intrinsically safe approval of that radio unit. Accessory Safety Information Important: Save these accessory safety instructions. • Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.
Accessory Safety Information • • • • • • • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician. Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
MOTOROLA LIMITED WARRANTY Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA PRODUCTS COVERED LENGTH OF COVERAGE Products as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. Accessories as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
MOTOROLA LIMITED WARRANTY Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty. Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. software.
Limited Warranty Motorola Communication Products (International) Limited Warranty Motorola Communication Products (International) Note: This Warranty applies in Singapore and the Philippines. I.
MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole, or any portion of the system not produced by MOTOROLA, under this warranty.
Limited Warranty Motorola Communication Products (International) b. Defects or damage from misuse, accident, water, or neglect. c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. d. Breakage or damage to antennas unless caused directly by defects in material workmanship. e.
settlement or compromise; and c. Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return.
Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2004 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.
Index Numerics 2-way radio 92 see also Private calls, group calls, and call alerts A Accessories 16 safety 114 Alpha mode 55 Antenna 6 attaching 6 removing 6 B Backlight 91 Battery 3 care 5 charging 4, 5 door 2 inserting 3 safety 110 Baud rate 94 C Call alerts 28 deleting 29 queue 28 receiving 28 responding 28, 29 sending 28 sorting 29 status messages 71 viewing 28 Call filtering 98 Call forwarding all calls 39 missed calls 40 off 40 Call Hold 43 Call Timers 46 Call Waiting 42 off 42 Calls answering auto
Index icons 32 iDEN Phonebook Manager 38 international numbers 37 searching 33 showing all entries 34 showing only Private IDs 34 SIM card 32 storing fast 36 storing from idle screen 36 storing from Memo 36, 50 storing from recent calls 30, 36 type 30, 32 viewing 33 with non-i325 phones 38 D Direct Launch 26 Display backlight 91 colors 91 contrast 91 options 9 screen 9 126 E Email 32, 35, 48 Emergency calls 21 Emergency Group calls 69 ending 70 making 69 receiving 70 End key 1 F Faxes receiving 48 sendin
storing to Contacts 36 International numbers 44 calling 44 storing 37 Isolated Operation 70 J Java applications deleting 73 memory 74 K Keypad 1 locking 15, 93 L Language 91 LINCaround 22 channels 23 codes 23 emergency calls 26 private LINCaround calls 25 setup options 26 talk range 23 Lists, see menus M Memo 50 calling from 50 creating 50 editing 50 storing to Contacts 36, 50 viewing 50 Memory Java applications 74 MOSMS messages 66 ring tones 53 voice records 88, 89 Menu key 1, 10 Menus 9, 10 context-s
Index P Packet data 48 Passwords 93 Patent information 124 Pauses dialing 44 storing 37 Phone 1, 9 active line 91 care 6 locking 93 modem 47 off 6 on 6 only 94 setting up 2 Profiles 95 call filtering 98 changing settings 96 creating 97 deleting 98 editing 98 surveillance 96 switching 95 128 temporary 97 viewing 95 Programming, over-the-air 7 PTT One Touch 20 One Touch, setting 44 PUK code 13 R Radio frequency 105 Recent calls 18, 30 deleting 31 display time 94 icons 30 storing to Contacts 30, 36 viewing
using 100 SIM card 3, 12, 14 Contacts 32 inserting 14 removing 15 with non-i325 phones 38 SIM PIN 12, 93 changing 12 default 12 entering 12 requirement 13 unblocking 13 SMS messages 58, 61 also see MOSMS messages 61 Speakerphone 20 Speed Dial 20, 33, 35 State Tone 27 Status messages 103 in call alerts 71 Surveillance profile 96 Symbols mode 57 T T9 Text Input, see text entry Talkgroup Scan 69 Talkgroups 45, 67, 92 Text display area 9, 18 Text entry 55 Alpha mode 55 database 55, 56 icons 55 mode 55 Numeric
Driving Safety Tips “Safety is your most important call!” Your Motorola wireless telephone gives you the powerful ability to communicate by voice — almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
• Your phone can perform many other functions besides allowing you to make and receive calls. Do not let these features distract you from driving. Use them only when it is safe to do so. • Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. • Use your wireless phone to help others in emergencies.
