Phone User Guide i335 Phone www.nextel.com © 2007 Sprint Nextel. All rights reserved. SPRINT, the NEXTEL name and logo, and other trademarks are trademarks of Sprint Nextel. Printed in the U.S.A.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Product Support: www.motorola.com/iden Certain mobile phone features are dependent on the capabilities and settings of your service provider’s network.
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i335 Model Number: H98XAH6JR5AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules.
Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Welcome to Nextel® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Your Phone’s Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Section 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1A. Setting Up Service . . . . . . . . . . . . . . . . . . . .
2B. Controlling Your Phone’s Settings . . . . . . . . . . . . . . . . 78 Using the Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Setting Ring Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Changing the Look of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Temporarily Turning Off Transmissions . . . . . . . . . . . . . . . . . . . . . 92 Setting One Touch Direct Connect . . . . . . . . . . . . . . . . .
Section 3: Service Features . . . . . . . . . . . . . . . . . . . . . . .169 3A. Service Features: Phone Calls . . . . . . . . . . . . . . . . . . . 170 Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Putting a Call on Hold and Making a Second Call . . . . . . . . . . . 172 Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4B. Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . 263 Motorola Limited Warranty for the United States and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . 264 Service and Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Welcome to Nextel® You can make both wireless phone call and Nextel Direct Connect® calls on the Nextel National Network from the same phone. This combination gives you more of what you need to do more of what you want. Welcome to a future full of possibility. Welcome to Nextel. Thank you for choosing Nextel.
Introduction This Phone User Guide introduces you to your wireless service and the features of your new phone. It’s divided into four sections: ⽧ Section 1: Getting Started ⽧ Section 2: Using Your Phone ⽧ Section 3: Service Features ⽧ Section 4: Safety and Warranty Information Throughout this guide, you'll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service.
Your Phone’s Menu The following list outlines your phone’s menu structure. For more information about navigating through the menus, please see “Navigating Through Phone Menus and Options” on page 24.
3: Auto Redial 4: Call Waiting 5: Auto Ans 6: Minute Beep 7: Call Duration 8: TTY 1: Use TTY 9: Notifications 1: Receive All 2: Msg Mail Only 3: Delay All 10: DTMF Dialing 11: Prepend 1: Prepend 2: Number 3: DC/GC OPTIONS 1: Tkgrp Silent 2: Tkgrp Area 3: One Touch DC 1: Off 4: Assigned No.
6: Center Key 7: Left Sftkey 8: Right Sftkey 9: Power Up 1: App 5: VOLUME 1: Line 1 4: Earpiece 7: Java Earpiece 2: Line 2 5: Speaker 8: Java Spkr 3: Messages 6: Keypad 9: Data 6: SECURITY 1: Phone Lock 1: Lock Now 2: Auto Lock 2: Keypad Lock 1: Lock Now 2: Auto Lock 3: SIM PIN 1: On 2: Off 4: GPS PIN 1: On 2: Off 5: Change Passwds 1: Unlock Code 4: GPS PIN 2: Security Code 3: SIM PIN 7: ADVANCED 1: Alert Timeout 2: Headset/Spkr 3: Connectivity 1: Network ID 2: Master Reset 4: Reset Default
7: Baud Rate RING TONES 1: BUY RING TONES 2: VIBRATE ALL 3: [RINGERS] 4: VIBRATE 1: Phone Line 1 4: Voice Mail 7: Direct Send All 5: SILENT CONTACTS 1: [NEW CONTACT] 2: [NEW GROUP] MESSAGES 1: [CREATE MESG] 2: VOICE MAIL 3: INBOX 4: DRAFTS 5: SENT ITEMS 6: NET ALERT 7: SMS CALL FORWARD 1: FORWARD 2: TO DOWNLOADS BLUETOOTH 1: HANDS FREE 1: [Find Devices] 2: LINK TO DEVICES vi 2: Phone Line 2 5: Messages 8: Reminders 3: Call Alert 6: Net Alert
3: DEVICE HISTORY 4: SETUP 1: Power 2:Name 3: Find Me Time 5: FIND ME MY INFO DIRECT TALK 1: GO TO DIRECT TALK 2: SETUP 1: Direct Launch 2: State Tone 3: HELP DIRECT CONNECT VOICERECORD 1: [NEW VOICEREC] GPS 1: POSITION 2: PRIVACY 3: INTERFACE 1: NMEA OUT DATEBOOK MEMO CALL TIMERS 1: LAST CALL 2: PHONE RESET 3: PHONE LIFETIME 4: DC/GC RESET 5: DC/GC LIFETIME 6: CIRCUIT RESET 7: CIRCUIT LIFETIME vii
8: KBYTES RESET RECENT CALLS SHORTCUTS 1: [NEW ENTRY] 2: 1) SHORTCUTS 3: 2) CNTCS[NEW CONTACT] 4: 3) RECENT CALLS 5: 4) CONTACTS 6: 5) DATEBOOK 7: 6) MESSSAGES 8: 7) VOICERECORD 9: 8) NET 10: 9) CALL FORWARD PROFILES 1: [NEW PROFILE] 2: STANDARD 3: CAR 4: MEETING 5: OFFICE 6: OUTDOORS 7: HEADSET 8: PRVT ONLY 9: CONTCS ONLY CALL ALERT MY PICTURES viii
Use and Care To care for your Motorola phone, keep it away from: liquids of any kind Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. extreme heat or cold Avoid temperatures below -10°C/14°F or above 45°C/113°F. microwaves Don’t try to dry your phone in a microwave oven. dust and dirt Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials. cleaning solutions To clean your phone, use only a dry soft cloth.
x
Section 1 Getting Started
Section 1A Setting Up Service In This Section ⽧ Getting Started ⽧ Setting Up Your Voicemail ⽧ Enabling Security ⽧ Account Passwords ⽧ Getting Help Setting up service on your new phone is quick and easy. This section walks you through the necessary steps to unlock your phone, set up your voicemail, establish passwords, and contact Nextel for assistance with your wireless service.
Setting Up Service Getting Started Setting Up Your Phone Before using your i335 phone: 䢇 Make sure your SIM card is in place. 䢇 Charge the battery. 䢇 Turn on your phone. See “Getting Started With Your Phone” on page 11 for more information. Determining If Your Phone Is Already Activated If you purchased your phone at a Sprint Store or received it in the mail, it is probably ready to use. If your phone is not activated, please call 1-800-639-6111 from a landline phone.
Setting Up Your Voicemail Unanswered phone calls are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, Nextel recommends that you set up your voicemail and personal greeting as soon as your phone is activated. To set up your voicemail: 1. Using your i335 phone, call your wireless phone number. 2. Follow the system prompts to: 䡲 䡲 䡲 Create your passcode. Record your name announcement. Record your greeting.
Setting Up Service Account Passwords With Nextel service, you enjoy unlimited access to your personal account information and voicemail account. To ensure that no one else has access to your information, you need to create passwords to protect your privacy. Account Password If you are the account owner, you will create an account username and password when you sign on to www.nextel.com. (Click Need to register for access? to get started.
Getting Help Visit www.nextel.com You can go online to: 䢇 Access your account information. 䢇 Check your minutes used (depending on your service plan). 䢇 View and pay your bill. 䢇 Enroll for online billing and automatic payment. 䢇 Purchase accessories. 䢇 Shop for the latest phones. 䢇 View other service plans and options available. 䢇 Learn more about data services and other great products like games, ringers, screen savers, and more.
Phone Basics Sec tion 1B Your Phone: The Basics In This Section ⽧ Your i335 Phone ⽧ Getting Started With Your Phone ⽧ Finding Your Phone Number and Direct Connect Number ⽧ Basic Phone Features ⽧ Accessories ⽧ Entering Text Your phone is packed with features that simplify your life and expand your ability to stay connected to the people and information that are important to you.
Your i335 Phone Front View of Your i335 Phone 16. Earpiece 1. Volume Keys 15. Display 2. Direct Connect Button 14. Softkeys 3. Menu Key 4. Audio Connector 13. OK Key 12. Navigation Keys 5. TALK Key 11. Speaker Key 6. USB Connector 7. Speaker (beneath keypad) 8. Internal Antenna 8 Section 1B: Your Phone: The Basics 10. END/Power Key 9.
Phone Basics Key Functions 1. Volume Keys allow you to adjust the ringer volume in standby mode or adjust the voice volume during a call. To mute the ringer during an incoming call, press the volume key up or down. 2. Direct Connect Button allows you to use your phone as a long-range, digital walkie-talkie. 3. Menu Key (M) takes you to the main menu from standby mode and allows you to access contextsensitive menus from other screens. 4.
9. Microphone allows the other caller to hear you clearly when you are speaking to them. Although the microphone is not visible, always remember not to cover the microphone area when you are speaking on the phone. Otherwise, your voice may be muffled. 10. END/Power Key (E) ends a call. Press and hold E for two seconds to turn your phone on or off. While in the main menu, it returns the phone to standby mode and cancels your input. When you receive an incoming call, press E to mute the ringer. 11.
Phone Basics Getting Started With Your Phone To start using your i335 phone: 䢇 Make sure your SIM card is in place. 䢇 Charge the battery. 䢇 Turn on your phone. After you’ve completed these items, you are ready to begin using your new phone. Locating Your SIM Card Your SIM (Subscriber Identity Module) card is a small card with gold foil lodged within a larger card. This card is included in the shrink-wrap package that also contains the phone user guide and other documentation.
3. With your fingers, carefully slide the SIM card into your phone, until it lies flat in the SIM card holder. IMPORTANT Do not touch the gold-colored areas of your SIM card. Removing Your SIM Card IMPORTANT To avoid losing information stored in your SIM card, do not remove it from your phone unless absolutely necessary. To remove your SIM card: 1. With your phone powered off, remove the battery door and battery. See “Removing the Battery” on page 17. 2.
Protect your SIM card as you would any delicate object. Store it carefully. Phone Basics Note Using Your Phone’s Battery and Charger WARNING Use only Nextel-approved or Motorola-approved batteries and chargers with your phone. The failure to use a Nextel-approved or Motorola-approved battery and charger may increase the risk that your phone overheats, catches fire, or explodes, resulting in serious bodily injury, death, or property damage.
Battery Use and Battery Safety 䢇 Motorola recommends you always use Motorola-branded batteries and chargers. The warranty does not cover damage caused by non-Motorola batteries and/or chargers. Caution 䢇 䢇 䢇 䢇 䢇 14 Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Improper battery use, or use of a damaged battery, may result in a fire, explosion, or other hazard. Battery usage by children should be supervised.
䢇 䢇 Phone Basics 䢇 It is normal for battery life to decrease over time, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times. Avoid damage to battery and mobile device. Do not disassemble, open, crush, bend, deform, puncture, shred, or submerge the battery or mobile device. Avoid dropping the battery or mobile device, especially on a hard surface.
Installing the Battery To install your battery: 1. Open the door covering the USB connector and audio connector. 2. Slide the release button until it releases the battery door. 3. Side the battery cover forward slightly and remove the battery cover. 4. Insert battery as shown below. Push the battery down until it snaps in place. 5. Replace the battery door.
WARNING Phone Basics Removing the Battery Do not handle a damaged or leaking Li-Ion battery as you can be burned. To remove your battery: 1. Make sure the phone is powered off. 2. Open the door covering the USB connector and audio connector. 3. Remove the battery door. 4. Remove the battery by lifting it out from the side. Charging the Battery Your phone’s Li-Ion battery is rechargeable and should be charged as soon as possible so you can begin using your phone.
3. Pull and rotate the connector cover. 4. Plug the other end of the charger into the USB connector. Your display screen lets you know the battery is charging. Both the battery icon d and a text message show the charging status. Tip You can also charge your phone using a Motorola-approved USB cable and a computer that supports charging through its USB port. You can only use a Motorola-approved USB cable.
Phone Basics Finding Your Phone Number and Direct Connect Number My Info lets you view your phone number, Direct Connect number, and other phone information. To view information about your phone: 1. Press M to access the main menu. 2. Scroll to My Info. Note You may need to select More to display My Info. 3. Press O. 4. Scroll to see your information: 䡲 䡲 䡲 䡲 䡲 䡲 My Name — You can enter your name here. Line 1 and Line 2 — your phone numbers for phone lines 1 and 2.
䡲 Note Circuit Data — the number you use if you want to use your phone to transfer circuit data. See “Using Your Phone as a Modem” on page 238. You receive this number from Nextel. If you request equipment-related transactions on your account, Nextel Customer Service may require you to provide specific information about your phone.
Phone Basics Basic Phone Features Congratulations on purchasing your new i335 phone. Your phone is lightweight, durable, and easy-to-use. It offers many significant features and service options. The following list previews some of those features and provides page numbers where you can find out more: 䢇 You can make both traditional wireless phone calls and Nextel Direct Connect calls on the Nextel National Network.
Viewing Status Information Your phone’s display screen provides a wealth of information about your phone’s status and options. This list identifies some of the symbols you’ll see on your phone’s display screen: 22 abc def gd Battery Strength — A fuller battery indicates a greater charge. opqr s Signal Strength — More bars next to the antenna indicate a stronger signal. 6 No Service — Your phone is without service. You cannot make or receive any type of call.
Ringer Off — Your phone is set to not ring. See “Setting Your Phone to Vibrate” on page 85. u Speaker Off — Sets Direct Connect sound to come through the earpiece rather than through the speaker. wxT yz Messages — You have one or more messages. See page 184. lji kmX nW Text Input — You are using one of the phone’s text entry methods. See “Entering Text” on page 27. DE Internet — You are ready to browse the Internet or are browsing the Internet using a secure connection.
Navigating Through Phone Menus and Options The navigation keys on your phone allow you to scroll through menus and options quickly and easily. To navigate through a list-type menu, simply press your navigation keys up or down. The scroll bar at the right of the menu keeps track of your position in the menu at all times. For a diagram of your phone’s menu, please see “Your Phone’s Menu” on page iii. Many features provide context-sensitive menus that let you access related features and actions.
Phone Basics Shortcuts and Personalized Key In standby mode, your phone gives you ways to quickly access features you use frequently: 䢇 Use the Shortcuts feature to quickly access most menu options by pressing a number on your keypad or saying the voice name of the shortcut. 䢇 Use the Personalize feature to assign main menu items to the navigation keys, softkeys, OK key, and menu key, as well as setting a main menu item to appear when your turn on your phone.
Accessories Your phone comes with the following accessories: 䢇 A Li-Ion battery and charger. 䢇 A 128K SIM card. Various accessories are available for use with your i335 phone, including cases, vehicle power chargers, data cables, hands-free accessories, and more. To order additional accessories, go to www.nextel.com or call 1-866-866-7509. You can also contact your Nextel Authorized Representative or stop by any Sprint Store. For information on Sprint Store locations, go to www.sprintstorelocator.com.
Phone Basics Entering Text You can enter text, numbers, and symbols into your phone using Alpha, Word, Numeric, or Symbol text input modes. l Alpha — Press a key several times for each character. j Word — Press a key once for each letter while words likely to be the one you want are chosen from a database. i k Symbols — Enter punctuation and other symbols. Numeric — Enter numbers. When you access a screen that requires you to enter text, you start in the mode last used.
To enter a word: 1. Select Word as your text input mode. 2. Type a word by pressing one key for each letter. For example, to type “test” press 8 3 7 8. The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3. If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears.
Phone Basics Special Function Keys Some of the phone’s keys assume different functions while in Alpha or Word mode. Spaces Press # for a space. Capitalization When you press and hold the # key, it acts as a three-way toggle. Press and hold # to make the next letter typed uppercase (shift), to make all subsequent letters typed uppercase (caps lock), or to go back to lowercase letters. These icons appear: m or X n or W Shift is on. Caps lock is on.
Using Numeric Mode Numeric mode allows you to enter numbers. To use numeric mode: 1. Select Numeric as your text input mode. 2. Press the number buttons on your keypad to enter numbers. Using Symbols Mode Symbols mode allows you to choose from a list of symbols. To use symbols mode: 1. Select Symbols as your text input mode. A row of symbols appears along the bottom of the phone’s display. Scroll right to view the complete row. 2. Press O to select the highlighted symbol.
Section 2 Using Your Phone
Section 2A Making and Answering Calls In This Section ⽧ Types of Calls ⽧ Making and Answering Phone Calls ⽧ Making and Answering Nextel Direct Connect® Calls ⽧ Making and Answering Nextel Group Connect® Calls ⽧ Using Nextel Direct Send ⽧ Making and Answering Talkgroup Calls ⽧ Making and Answering Nextel Direct Talk Calls ⽧ Using Call Alerts ⽧ Using the Recent Calls List Your i335 phone offers many different ways to connect to your family, friends, and associates.
Types of Calls Note 䢇 Making Calls With the Nextel National Network, Nextel Direct Connect, and your i335 phone, you have the following traditional wireless phone and Nextel Direct Connect services available to you: 䢇 Digital Wireless Phone Calls offer clear calls and many extra services, including missed call notification, Three-Way Calling, speakerphone, and speed dialing (page 34).
Making and Answering Phone Calls Making Calls Placing a traditional, wireless phone call from your phone is as easy as making a call from any landline phone. To make a phone call using your keypad: 1. Make sure your phone is on. 2. Enter a phone number from standby mode. (If you make a mistake while dialing, press Back [right softkey] to erase one digit at a time. Press and hold Back [right softkey] to erase the entire number.) 3. Press S. 4. Press E when you are finished.
Making Calls Your phone notifies you of incoming calls in the following ways: 䢇 The phone rings or vibrates. 䢇 The backlight illuminates. 䢇 The display screen shows an incoming call notification. If the incoming call is from a number stored in your Contacts, the entry’s name and/or number appears. Ending a Call To disconnect a call when you are finished: 䊳 Press E. Sending a Calls to Voicemail To send a call to voicemail instead of answering it: 䊳 Press E or press No (right softkey).
knowledge of your location to the emergency response center when you make an emergency call. IMPORTANT Always report your location to the 911 operator when placing an emergency call. Some designated emergency call takers, known as Public Safety Answering Points (PSAPs) may not be equipped to receive GPS location information from your phone. Emergency calls cannot be placed while the keypad is locked.
Making Phone Calls From Contacts Making Calls If you have numbers stored in Contacts, you can use these listings to make calls. For information on entering numbers into Contacts, see “Creating Entries” on page 118. To make a phone call from Contacts: 1. Press M > Contacts. 2. Scroll to the name or number you want to call. Tip To find Contacts entries faster, use the keypad to enter the first letter of the name. 3. Press S to place the call now.
Making Phone Calls From the Recent Calls List If you have numbers stored in the Recent Calls list, you can use these numbers to make calls. For information on the Recent Calls list, see “Using the Recent Calls List” on page 73. To make a phone call from the Recent Calls list: 1. Press M > Recent Calls. 2. Scroll to the item containing the number you want to call. 䡲 If you scroll to a call, you can make a call to the number that made the call.
Making a Phone Call Using a Voice Name Making Calls If you have created a voice name in Contacts for the number you want to call, say the voice name into your phone to enter the number. To use a voice name to enter a number: 1. Press and hold s until a prompt appears telling you to say the voice name. 2. Speaking into the microphone, say the voice name assigned to the number you want to call. Your phone plays the name back to you. 3. The call is placed automatically.
Redialing the Last Number To redial the last number: Press and hold S. 䊳 Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For more information on pauses and waits, see “Creating Pauses and Waits” on page 123. To create a pause while dialing a phone number: 1. From the keypad, enter the digits you want to occur before the pause. 2. Press M. 3. Select Insert Pause. 4. Enter the digits you want to occur after the pause.
Using Mute Making Calls Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. To turn mute on: 䊳 Press Mute (left softkey). While mute is on, Unmute appears as the left softkey option. To turn mute off: 䊳 Press Unmute (left softkey).
Making Nextel Direct Connect Calls To make a Direct Connect call: 1. Enter the Direct Connect number you want to call. (See “Dialing Nextel Direct Connect Numbers” below.) 2. Press and hold the Direct Connect button on the side of your phone. Begin talking after your phone emits a chirping sound. 3. Release the Direct Connect button to listen. A Direct Connect call ends automatically after there is no activity on the call for several seconds.
Using Just the Member ID Making Calls If you are contacting someone sharing your network and area IDs, you only need to enter the member ID (the last part of the number). To make a Direct Connect call using only the member ID: 1. Enter the member ID of a Direct Connect number. 2. Press and hold the Direct Connect button on the side of your phone. Continue as you would on any Direct Connect call.
Making Direct Connect Calls From Recent Calls List If you have numbers stored in the Recent Calls list, you can use these numbers to make calls. For information on the Recent Calls list, see “Using the Recent Calls List” on page 73. To make a Direct Connect call from the Recent Calls list: 1. Press M > Recent Calls. 2. Scroll to the item containing the Direct Connect number you want to call. 3. Press and hold the Direct Connect button.
Answering Nextel Direct Connect Calls Making Calls When you receive a Direct Connect call, your phone emits a chirping sound or vibrates, and the Direct Connect button lights up. You then hear the voice of your caller. To answer a Direct Connect call: 1. Wait for the caller to finish speaking. 2. Press and hold the Direct Connect button on the side of your phone. Continue as you would on any Direct Connect call. 3. Press E to end the call.
Making and Answering Nextel Group Connect® Calls A Group Connect call is similar to a Direct Connect call to one user, but is made to multiple Direct Connect subscribers at once. You can create Groups from your phone and call up to 20 Nextel subscribers anywhere on the Nextel National Network to other Group Connect-compatible phones*. You can create a Group for one-time use or store it to Contacts so you can call it at any time. ⴕ* Not all phones are Group Connect-compatible. See www.nextel.
Making Calls – or – Enter or select a Direct Connect number and add more Direct Connect numbers. See “Starting a Group Connect Call With a Direct Connect Number” on page 49. 2. Press the Direct Connect button. Receiving Group Connect Calls To answer a Group Connect call: 䊳 Proceed as if answering a Direct Connect call from one user. Only one person at a time may speak on a Group Connect call. Creating Groups in Contacts To create groups in Contacts: 1. Press M > Contacts. 2. Select [New Group]. 3.
Adding Group Members You can add Group members that have a Direct Connect number and Group Connect-compatible phone to your Group by selecting them from Contacts, the Recent Calls list, Memo, or by manually entering the Direct Connect number from your keypad. You can also add all members in an existing Group to another Group by selecting the Group name from Contacts. To add Group members from Contacts, the Recent Calls list, or Memo: 1. While creating a Group, select [Add Member].
Starting a Group Connect Call With a Direct Connect Number Making Calls To start a Group Connect call with any Direct Connect number you want to call: 1. Press M > Direct Connect and choose the first Direct Connect number that you want in the Group Connect call. – or – From standby mode, enter the Direct Connect number. – or – From the Contacts list, scroll to an entry containing the Direct Connect number. – or – From the Recent Calls list, scroll to an entry containing the Direct Connect number. 2.
Removing Members or Groups To remove a member from a Group: 1. From Contacts, scroll to the Group you want to delete the member from. 2. 3. 4. 5. 6. Press Edit (left softkey). Scroll to the member you want to remove. Press M. Select Remove Member. Select Save. To remove all members from a Group: 1. 2. 3. 4. 5. From Contacts, select a Group. Press Edit (left softkey). Press M. Select Remove All Members. Press Yes (left softkey). To delete a Group from Contacts: 1. 2. 3. 4.
To store a group to Contacts from an active Group Connect call: Making Calls 1. During an active Group Connect call, press M. 2. Select Store Group. 3. If you want, add more information to the entry. . Note You cannot record a voice name during an active call. 4. Press Save (left softkey). Storing Members of Groups To store a member from the Recent Calls list or within Contacts: 1. Select the Group containing the number or member you want to store. 2. 3. 4. 5. 6. Press M. Select Store Number.
Group Connect Call Information While you are in a Group Connect call, the following appears on the screen: 䢇 The name of the Group. 䢇 The name or the Direct Connect number of the person speaking. 䢇 The number of members who are participating in the Group Connect call. Group Connect Call Details During a Group Connect call, you can view details about the other group members, such as their name or Direct Connect number, and their status on the call.
Using Nextel Direct Send Making Calls Nextel Direct Send lets you exchange pictures, My Info, contact information, and Groups with other phones that have this capability. You do this through Direct Connect calls. Nextel Direct Send cannot be used during Talkgroup calls. Pictures cannot be sent in Group Connect calls.
5. When prompted, press the Direct Connect button to resume the Direct Connect call. Note The first time you send a stored picture after turning the phone on, the message Messaging Fees May Apply appears and you are prompted to respond. Press Accept (left softkey) to send the picture. Press Reject (right softkey) to not send the picture. Starting a Call by Sending a Picture You can start a call by choosing a stored picture from My Pictures.
7. When prompted, press the Direct Connect button to resume the Direct Connect call. Making Calls Receiving a Picture When someone sends you a picture using Nextel Direct Send, your phone emits a tone or vibrates and a message appears on the display asking you if you want to accept the picture. Pictures you receive are saved to your phone’s memory and are accessible through My Pictures.
Declining a Picture To decline a picture: 䊳 When you see the message asking you if you want to accept the picture, press No (right softkey). The picture is not transmitted. Setting Picture Capability To turn your phone’s ability to send and receive pictures in Direct Connect calls on or off: 1. Press M > Settings > DC/GC Options > On/Off Settings. 2. Select Pictures. This setting does not affect your phone’s ability to send and receive My Info or contact information.
It may include Line 1, Line 2, Carrier IP, and Circuit Data, depending on the options provided by your service provider and how you set your sending options. Making Calls The default setting is Line 1 only. To change which fields are sent: 1. 2. 3. 4. Press M > My Info. Press M. Select Direct Send Setup > Info To Send. A checkmark appears next to the fields that will be sent. To add or remove the checkmark, select the field. 5. When you are finished, press Done (left softkey).
To start a call by sending My Info: 1. 2. 3. 4. Press M > My Info. Press M. With Direct Send My Info highlighted, press O. Use the keypad to enter the Direct Connect number you want to send the information to. – or – Press Browse (right softkey). Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 5. When Ready to Send appears on the display, press the Direct Connect button to send the information.
To start a call by sending contact information: 1. From Contacts, scroll to or select the entry you want to Making Calls send. 2. Scroll to the Contacts entry you want to send and do the following: 䡲 If the Contacts entry you scrolled to is a Group, press M and select Send Group. If prompted, press Yes (left softkey) to allow yourself to be part of the group being sent. 䡲 To send a Contacts entry that is not a Group, press M and select Send Via... > Send Via PTT. 3.
Sending Groups Using Nextel Direct Send You can send a Group using Nextel Direct Send so that the person who receives the Group can use the list. To send a Group from the Recent Calls list: 1. 2. 3. 4. Note Scroll to or select the Group you want. Press M. Select Send Group. To include yourself in the Group, press Yes (left softkey). – or – To exclude yourself from the Group, press No (right softkey).
4. To include yourself in the Group, press Yes (right Note Making Calls softkey). – or – To exclude yourself from the Group, press No (left softkey). If you choose to include yourself and the Group already contains 20 members, you will be prompted that the list is full. You will be excluded from the list. 5. Enter the Direct Connect number of the person you want to send the Group to. – or – Select Browse to select a contact from Contacts, the Recent Calls list, or Memo. 6. Press O. 7.
Making and Answering Talkgroup Calls A Talkgroup is a predetermined group of Direct Connect users, created by an account administrator. Talkgroups can contain up to 100 members. Difference Between Group Connect and Talkgroup Calls In a Group Connect call, you or another caller determines who can participate in the call. By contrast, participation in a Talkgroup is determined by an administrator. Here are the ways Group Connect and Talkgroup calls differ.
Joining a Talkgroup Making Calls To participate in a Talkgroup, the account administrator must first add you to the membership and then you must “join” the Talkgroup. To join a Talkgroup: 1. Press Contacts (right softkey). 2. Scroll to the Talkgroup you want to join. 3. Press Join (left softkey). You can now receive communications from other members of this Talkgroup. You will hear all active Talkgroup conversations on your phone.
Making Talkgroup Calls To make Talkgroup calls: 1. Press # and then enter the Talkgroup number using the keypad. – or – Select the Talkgroup from Contacts or the Recent Calls list. 2. Press the Direct Connect button and continue as if making a Direct Connect call. Receiving Talkgroup Calls To answer a Talkgroup call: 䊳 Answer it as you would a regular Direct Connect call. Only one person at a time may speak on a Talkgroup call.
Making Calls Making and Answering Nextel Direct TalkCalls Nextel Direct Talk allows for two-way radio communication “off the network” between two or more phones equipped with this capability. This feature is very useful in areas without network coverage. You can make – 䢇 Code calls – two-way radio calls conducted off the network and using open channels and codes. In these calls, anyone using your same channel and code can hear your conversation.
Setting Your Phone to Nextel Direct Talk Before you and another caller can use Direct Talk, both of your phones must be set to Direct Talk mode. To set your phone to Direct Talk: 1. Press M > Direct Talk. 2. Select Go To Direct Talk. After a few seconds, your channel and code appear on the display screen. Your phone displays the last channel and code used for Direct Talk. To return to network mode from Direct Talk: 1. Press M > DT Options. 2. Select Exit Direct Talk.
Making Calls 4. Select Code. 5. Select a code. 6. Press Back (right softkey) to return to the Direct Talk standby screen. Making and Receiving Code Calls in Direct Talk Mode To make a Code call using Direct Talk: 䊳 In Direct Talk mode, press and hold the Direct Connect button. Your phone displays Transmitting, along with the channel and code selected.
To reach you, other Direct Talk callers must be on your same channel and dial your ten-digit wireless phone number to reach you. Receiving a Private Direct Talk Call The number or name of the person who initiated the call appears on your display screen. Answer the call in the same way you answer a regular Direct Connect call. A Private Direct Talk call ends a short time after the last party releases the Direct Connect button. The display screen returns to Direct Talk standby mode.
䢇 The person that you are trying to reach is set to a different channel, or is out of range. Making Calls Receiving All Calls on a Channel You can set your phone to receive all Direct Talk transmissions that are within range and set to the same channel. Do this by selecting Receive All, instead of a code. However, you cannot initiate a call when the code is set to Receive All.
Using Call Alerts Sending a Call Alert lets the recipient know you want to talk to him or her on a Nextel Direct Connect call. When you send a Call Alert, the recipient’s phone alerts them and displays your name or Direct Connect number. Sending Call Alerts To send a Call Alert: 1. Enter the Direct Connect number you want to send the alert to. 2. Press Alert (left softkey). 3. Press the Direct Connect button until Alert Successful appears on the display screen.
To store a Call Alert in the Call Alert queue: 䊳 Making Calls Note Press Queue (left softkey). The Recent Calls list also stores Call Alerts you have received. They appear as Direct Connect calls. Call Alerts remain in your Recent Calls list until you delete them or until they reach the end of the list. Using the Call Alert Queue When you queue a Call Alert, it remains in the Call Alert queue until you make a Direct Connect call to the sender or delete it. Viewing Call Alerts To view a Call Alert: 1.
To send a Call Alert to the sender: 1. Press M > Call Alert. 2. Scroll to the Call Alert you want to respond to. 3. Press Alert (left softkey). Ready to Alert appears on the display. 4. Press the Direct Connect button until Alert Successful appears on the display. Deleting Call Alerts To delete a Call Alert from the queue: 1. From the Call Alert queue, scroll to the Call Alert you want to delete. 2. Press M. 3. Select Delete. 4. Press O or press Yes (right softkey) to confirm.
Using the Recent Calls List Making Calls The Recent Calls list displays information associated with calls you have made and received and Call Alerts you have received. It also displays My Info and contact information sent to you from other phones. The Recent Calls list displays up to 20 items. Viewing the Recent Calls List To view the Recent Calls list: 1. Press M > Recent Calls. 2. Scroll through the list.
The Direct Connect number Contacts type icon appears when you receive a Direct Connect call or Call Alert, even if the number is not stored in Contacts. Call Alerts you have received appear as Direct Connect calls. Like all items in the Recent Calls list, they remain listed until you delete them or until they reach the end of the list. For phone calls, an additional icon appears giving information about the call: X W V A call you made. A call you received. A missed call.
Contact Information From Other Phones Making Calls The Recent Calls list displays contact information sent from other phones. This information comes from the other phone’s Contacts list or Recent Calls list. See “Sending My Info and Contact Information” on page 56. This icon d appears with contact information on the Recent Calls list. Contact information in the Recent Calls list displays: 䢇 The name contained in the contact information.
Storing Items to Contacts Storing items to Contacts: 1. From the Recent Calls list, scroll to or select the item you want to store. 2. Press Save (left softkey) – or – If Save is not one of your options: Press M. Select Save or Update Contacts. Tip If the item you want to store is a call, Save does not appear if the number is already stored in Contacts. 3. To store the item as a new entry, select [New Contact]. – or – To store the number to an existing entry, select the entry.
Deleting Items To delete an item from the Recent Calls list: Making Calls 1. From the Recent Calls list, scroll to or select the item you want to delete. 2. Press Delete (right softkey). – or – If Delete is not one of your options, press M. Select Delete. 3. Press O or press Yes (left softkey) to confirm. To delete all items on the Recent Calls list: 1. From the Recent Calls list, press M. 2. Select Delete All. 3. Press O or press Yes (left softkey) to confirm.
Sec tion 2B Controlling Your Phone’s Settings In This Section ⽧ Using the Settings Menu ⽧ Setting Ring Tones ⽧ Changing the Look of Your Phone ⽧ Temporarily Turning Off Transmissions ⽧ Setting One Touch Direct Connect ⽧ Using a Headset ⽧ Using Profiles ⽧ Using Shortcuts Using the menu options available on your phone, you can customize your phone to sound, look, and operate just the way you want it. This section describes how you can change your phone’s settings to best suit your needs.
Using the Settings Menu Settings contains many submenus that let you customize your phone. To access the Settings menu and submenus: Your Your Phone’s Phone’s Settings 1. Press M > Settings. 2. Select the submenu you want. For information on applying groups of settings to your phone together, see “Using Profiles” on page 94. Display/Info Features The Display/Info menu controls how the keypad and display appear: 䢇 Wallpaper — changes the wallpaper that appears on the display screens.
Phone Calls Features The Phone Calls menu controls how your phone handles phone calls: 䢇 Set Line — sets phone line 1 or phone line 2 as the active line for outgoing calls. If you are not provisioned for a second line and you set your line to line 2, you will not be able to make or receive calls. 䢇 Any Key Ans — If this feature is on, you can answer calls by pressing any key on the keypad. 䢇 Auto Redial — sets your phone to automatically redial calls you make when the system is busy.
DC/GC Options Features Your Your Phone’s Phone’s Settings The DC/GC Options menu controls how your phone handles Direct Connect calls, Group Direct calls, and Talkgroup calls: 䢇 Tkgrp Silent — controls whether you hear your Talkgroup calls. 䢇 Tkgrp Area — lets you define your Talkgroup area. 䢇 One Touch DC — sets One Touch Direct Connect. 䢇 Alert Type — controls how your phone notifies you when you receive Direct Connect calls, Group Connect calls, and Talkgroup calls.
䢇 䢇 䢇 䢇 䢇 䢇 䢇 Down Key — sets the main menu item you access when you scroll down in standby mode. Left Key — sets the main menu item you access when you scroll left in standby mode. Right Key — sets the main menu item you access when you scroll right in standby mode. Center Key — sets the main menu item you access when you press O in standby mode. Left Sftkey — sets the main menu item you access when you press the left softkey in standby mode.
䢇 䢇 Java Spkr —sets the volume of sound associated with Java applications coming out of the speaker. Data — sets the volume of sounds that notify you that you are receiving a circuit data call.
Advanced Features The Advanced menu contains advanced Settings features. 䢇 Alert Timeout — sets the amount of time a tone continues to sound and the logo backlight continues to flash when you receive a message notification, Call Alert, or Datebook reminder. 䢇 Headset/Spkr — sets headset options. See “Using a Headset” on page 94.
Setting Ring Tones To set the ring tone your phone plays when you receive phone calls, Call Alerts, message notifications, or Datebook reminders: Your Your Phone’s Phone’s Settings 1. Press M > Ring Tones. 2. Make sure Vibrate All is set to Off. 3. Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound; Silent sets your phone to neither vibrate nor make a sound. Tip Highlighting a ring tone lets you hear it. 4.
To set Vibrate All to On or Locked using the volume controls: Press the volume controls to turn down the volume as far as possible to set Vibrate All to On. Continue to hold the volume control down to set Vibrate All to Locked. Tip To set your phone to vibrate instead of making a sound for some features but not others: 1. 2. 3. 4. 5. Press M > Ring Tones. Make sure Vibrate All is set to Off. Select Vibrate from the list of ring tones. Select the features you want to set to make no sound.
Ring and Vibrate To set your phone to ring and vibrate when you receive phone calls or Call Alerts: 1. Press M > Ring Tones. 2. Make sure Vibrate All is set to Off. 3. Scroll through the list of ring tones and highlight the Your Your Phone’s Phone’s Settings one you want to assign. 4. 5. 6. 7. Press M. Select Assign w/Vibe. Select the features you want to set to ring and vibrate. When you are finished, press Done (left softkey). This icon S appears on the display.
3. 4. 5. 6. Highlight any ring tone. Press M. Select Overview. Scroll to view ring tones assigned to features and Contact entries. Downloading More Ring Tones If you want to use other ring tones, you can download them into your phone for a fee. Check the Downloads menu option on your phone for a catalog of additional items available for purchase and download directly from your phone. You can also access downloadable ring tones from the Ring Tones menu.
Note Ring tones are stored in your phone using the same memory space used to store messages, voice records, pictures, and Java application data that are stored in your phone’s memory. Deleting or moving some of these other items frees memory for ring tones. Deleting Custom Ring Tones Your Your Phone’s Phone’s Settings Deleting a ring tone from the list of ring tones deletes it from your phone.
Changing the Look of Your Phone Wallpaper A wallpaper is an image that appears as the background on your phone’s display. You can set wallpaper to appear on in standby mode only or on screen throughout your phone. If you want more wallpapers, you can download them into your phone for a fee. Check the Downloads menu option on your phone for a catalog of items available for purchase and download. You can also access downloadable wallpapers from the Wallpaper menu.
Setting Text Size To set the size of the text on the display: 1. Press M > Settings > Display/Info > Text Size. 2. Select the option you want: 䡲 䡲 Your Your Phone’s Phone’s Settings 䡲 Zoom — eleven characters per line. Standard — fourteen characters per line. Compressed — eighteen characters per line. To set your phone to briefly display very large digits when you enter numbers in standby mode: 1. Press M > Settings > Display/Info > Large Dialing. 2. Set this option to Large Digits.
Temporarily Turning Off Transmissions Sometimes you may want to have your phone on, but turn off its ability to make and receive calls and other transmissions. To set your phone so that it cannot make or receive phone calls, Direct Connect calls, Group Connect calls, or Talkgroup calls, or transfer data: 1. Press M > Settings > Advanced > Transmitters. 2. Set this option to Off. 3. Press Yes (left softkey). This icon 9 appears.
Setting One Touch Direct Connect One Touch Direct Connect sets your phone to call the most recent Direct Connect number or Group on the Recent Calls list, or a Direct Connect number you choose, every time you press the Direct Connect button. Your Your Phone’s Phone’s Settings To set your phone to call the most recent Direct Connect number or Group on the Recent Calls list: 1. Press M > Settings > DC/GC Options > One Touch DC. 2. Set this option to Last Call.
Using a Headset To set your phone to send incoming sound to a headset only, or to a headset and a speaker at the same time: 1. Press M > Settings > Advanced > Headset/Spkr. 2. Select HdsetOnly to send incoming sound to the headset only. – or – Select Hdset&Spkr to send incoming sound to the headset and ring tones to the speaker. Using Profiles A profile is a group of settings saved together so that you can apply them to your phone easily.
Viewing Profiles To view the profiles stored in your phone: 1. Press M > Profiles. 2. Scroll to the profile you want to view. Tip The profile that is currently in effect on your phone has a checkmark next to it. Your Your Phone’s Phone’s Settings 3. Press View (left softkey). 4. Scroll to view settings. Switching Profiles To apply a profile to your phone: 1. Press M > Profiles. 2. Scroll to the profile you want to apply. 3. Press O. The profile you selected is now in effect.
To set your phone to create a temporary profile that contains changes you make to settings: 1. 2. 3. 4. Press M > Profiles. Press M. Select Setup > Temp Profile. Set this option to On. To set your phone to update the profile in effect to reflect any changes you make to settings: 䊳 Set Temp Profile to Off in step 4 above. Temporary Profiles If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles.
Storing a Temporary Profile To store a temporary profile as a new profile: Press M > Profiles. Scroll to the temporary profile. Press M. Select Store As New. Enter the name you want to give the profile. When you are finished, press O. Your Your Phone’s Phone’s Settings 1. 2. 3. 4. 5. To overwrite the profile the temporary profile is based on: 1. 2. 3. 4. Note Press M > Profiles. Scroll to the temporary profile. Press M. Select Store Changes.
5. Press Create (left softkey). 6. Scroll through the list of options and set their values. 7. Press Done (left softkey). Editing Profiles To edit a profile: 1. 2. 3. 4. 5. 6. Press M > Profiles. Scroll to the profile you want to edit. Press M. Select Edit. Scroll through the list of options and set their values. When you are finished, press Done (left softkey). Deleting Profiles To delete a profile: 1. 2. 3. 4. 5. Press M > Profiles. Scroll to the profile you want to delete. Press M. Select Delete.
Setting Call Filtering The call filtering setting in each profile lets you control which calls, Call Alerts, and message notifications your phone notifies you of, and which it ignores. To set call filtering: 䡲 䡲 䡲 䡲 Your Your Phone’s Phone’s Settings 1. While setting options for a profile, select Call Filter. 2. Select a filtering option Phone set filtering options for phone calls. ⽧ Off sets your phone to notify you of all phone calls. ⽧ All sets your phone to ignore all phone calls.
Off sets your phone to notify you of all Call Alerts. On sets your phone to ignore all Call Alerts. Notifications set filtering options for message notifications. ⽧ Off sets your phone to notify you of all messages. ⽧ Voice Messages sets your phone not to sound a tone or vibrate when you receive voice messages. ⽧ Text Messages sets your phone not to sound a tone or vibrate when you receive text messages. ⽧ All sets your phone not to sound a tone or vibrate when you receive any message.
Using Shortcuts Shortcuts lets you access most menu options by pressing a number on your keypad (1 through 9) or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. Note When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts To create a shortcut: 1. Go to the menu item you want to create a shortcut for.
䡲 䡲 Press Yes (left softkey) to replace the existing shortcut. Press No (right softkey) if you want to keep the existing shortcut and assign another number key to the shortcut. Using a Shortcut To use a shortcut if you know the shortcut number: 1. From standby mode, press M. 2. On your keypad, press the number assigned to the shortcut. To use a shortcut if you do not know the shortcut number: 1. Press M > Shortcuts. 2. Scroll to the shortcut you want to use.
8. Repeat step 4 through step 7 for all the items you want to move. 9. Press Done (right softkey). To change the number or voice name assigned to a shortcut: Press M > Shortcuts. Highlight any shortcut. Press Edit (left softkey). With Key or Voice highlighted, press O to change assignments. Deleting Shortcuts To delete a shortcut: 1. 2. 3. 4. 5. Press M > Shortcuts. Scroll to the shortcut you want to delete. Your Your Phone’s Phone’s Settings 1. 2. 3. 4. Press M. Select Delete.
S ec t i o n 2 C Setting Your Phone’s Security In This Section ⽧ SIM Card Security ⽧ Using Your Phone’s Keypad Lock Feature ⽧ Java Applications and GPS Enabled ⽧ Setting Your GPS Privacy Options ⽧ Erasing Data and Resetting Your Phone By using the security settings on your phone, you receive peace of mind without sacrificing flexibility. This section will familiarize you with your phone’s security settings. With several options available, you can customize your phone to meet your personal needs.
SIM Card Security IMPORTANT Except for making emergency calls, your phone does not function without the SIM card. SIM Card’s PIN You can protect access to your phone by using the SIM card’s PIN (Personal Identification Number). When you enable SIM PIN, you must enter the PIN each time you power up the phone. You can change or disable the SIM PIN. To turn SIM PIN on or off: 1. Press M > Settings > Security > SIM PIN. 2. Select On or Off. 3. Enter the current SIM PIN. Tip The default SIM PIN is 0000.
Changing the PIN SIM PIN must be turned on in order to access this feature. Note To change your PIN: 1. 2. 3. 4. 5. Press M > Settings > Security > Change Passwds > SIM PIN. Enter the current SIM PIN and press Ok (left softkey). Enter the new SIM PIN and press Ok (left softkey). Reenter the new SIM PIN to confirm. Press Ok (left softkey). Unblocking the PIN If you enter your PIN incorrectly three times, your SIM card is blocked.
Using Your Phone’s Keypad Lock Feature Locking the phone’s keypad prevents its buttons from being pressed. When the keypad is locked, you can only: 䢇 Power the phone on and off. 䢇 Unlock the keypad. 䢇 Respond to incoming calls, messages, and alerts. IMPORTANT Emergency calls cannot be placed while the keypad is locked 1. From standby mode, press M. 2. Press *. If you press a key while the keypad is locked, instructions for unlocking the keypad display briefly. To unlock the keypad: 1.
The keypad can be set to lock in 30 seconds or in 1, 5, 10, 15, or 20 minutes if the keypad is not touched during the specified time. To turn the auto lock off, repeat step 3 and select Off. Java Applications and GPS Enabled Some Java applications can make use of your phone’s GPS feature to determine the approximate geographical location of your phone. (See “Using GPS Enabled” on page 139 for more information on the GPS feature.
Granting or Denying Permission If you choose By Permission, you must grant or deny each Java application access to the location of your phone when the application requests access for the first time. You may be required to grant or deny subsequent requests from the same application, depending on the privacy setting you choose for the individual Java application (see “Setting Privacy for Each Java Application” on page 110).
䡲 䡲 For this session — If the application requests access to the location of your phone again before you power off your phone, the request is granted without notifying you. Only Once — If the application requests access to the location of your phone again, you are prompted to grant or deny permission.
䡲 Never — When the application requests access to the location of your phone, the request is denied without notifying you. Setting Your GPS Privacy Options Your phone’s GPS privacy options control whether Java applications or other software applications on your phone may view the location of your phone. You may set your phone to one of these GPS privacy options. Note To set your GPS privacy options: 1. Press M > GPS > Privacy. 2. If your GPS PIN security feature is enabled, enter your GPS PIN.
Setting the GPS PIN Security Feature To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN. When you receive your phone, the GPS security feature is turned off, so you do not have to enter a GPS PIN to access your GPS privacy options. If you turn this feature on, you will be required to enter a GPS PIN to access your GPS privacy options. To turn the GPS Enabled security feature on or off: 1. Press M > Settings > Security > GPS PIN.
Erasing Data and Resetting Your Phone In some circumstances, you may wish ensure your privacy and security by erasing the information stored in your phone or resetting your service. The Reset All and Master Reset options in your phone’s Settings menu allow you to erase all stored information and reset your phone. Use these options only under the direction of Nextel Customer Service.
Sec tion 2F Using Contacts In This Section ⽧ About Contacts ⽧ Viewing Contacts ⽧ Creating Entries ⽧ Storing Numbers Faster ⽧ Editing Entries ⽧ Deleting Entries ⽧ Creating Pauses and Waits Now that you know the basics that make it easier to stay in touch with people and information, you’re ready to explore your phone’s more advanced features.
About Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. Information stored in Contacts is saved on your SIM card. A Contacts entry contains: 䢇 A name — A name is required if you are storing more than one number or address to the entry; otherwise, it is optional. Typically, this is the name of the person whose contact information is stored in the entry. 䢇 A ring tone — You can assign a ring tone to each entry.
䢇 A number or address — Each Contacts entry must contain a number or address. This may be any type of phone number, Direct Connect number, Group number, Talkgroup number, email address, or IP address. Note 䢇 䢇 You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 123 A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it.
Searching for a Name To search for a name in Contacts: 1. From the Contacts list, press Search (left softkey). – or – If Search is not one of your options: Press M. Select Search. 2. Enter the name you want to see. 3. Press O. Your phone finds the name you entered or the nearest match. Showing Only Direct Connect Numbers, Groups, and Talkgroups To set Contacts to show only entries that contain Direct Connect numbers, Groups, and Talkgroups: 1. From the Contacts list, press M. 2. Select Filter. 3.
Creating Entries A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details. After you have entered the number or address, Contacts type, and any other information you want, you can press Done (left softkey) to save the entry to Contacts. To cancel a Contacts entry at any time press, O to return to standby mode. To create a Contacts entry: 1.
5. To store a number or address: Select the # field (or ID for an email address, or IP for an IP address). 䡲 Enter the number or address. For phone numbers, use the ten-digit format. For email addresses, see “Entering Text” on page 27. 䡲 Tip Press Browse (left softkey) to select a number or address from Contacts, the Recent Calls list, or Memo. 䡲 When you are finished, press O. 6. If you want to assign more options to the number, select [Options]. See “Storing Numbers Faster” on page 120. 7.
10. If you want to add more numbers or addresses to the entry: 䡲 Scroll past the information you already entered. 䡲 Enter the additional information for the entry using step 2 through step 6. You must assign a name to the entry, if you have not already. 11. Press Done (left softkey). Storing Numbers Faster To store numbers to Contacts from standby mode: 1. 2. 3. 4. Use the keypad to enter the number you want to store. Press M. Select Store Number.
Editing Entries To edit a Contacts entry: 1. From the Contacts list, scroll to the entry you want to edit. 2. Press Edit (left softkey). – or – If Edit is not one of your options: Press M. Select Edit. The entry details screen displays. 3. Follow the applicable instructions in “Creating Entries” on page 118 to edit the various fields. Deleting Entries Deleting an Entry To delete an entry: 1. From the Contacts list, scroll to the entry you want to delete. 2. Press M. 3.
Deleting a Number or Address To delete a number or address: 1. From the Contacts list, scroll to the entry that contains the number or address you want to delete. 2. Scroll left or right to display the Contacts type for the number you want to delete. 3. Press M. 4. Select Delete Number. 5. Press O or press Yes (left softkey) to confirm. Note If an entry contains only one number or address, deleting the number or address deletes the entry.
Creating Pauses and Waits When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for three seconds before dialing further. A wait makes your phone wait for your response before dialing further. This feature is useful when using voicemail or other automated phone systems that require you to dial a phone number and then enter an access number. To program a pause: 䊳 Press and hold * until the letter P appears.
Sec tion 2G Using the Phone’s Tools In This Section ⽧ Using Your Phone’s Datebook ⽧ Using Java Applications ⽧ Using GPS Enabled ⽧ Using Bluetooth® ⽧ Using Memo ⽧ Using Voice Records ⽧ Using My Pictures ⽧ Using Call Timers Your phone is equipped with several personal information management features that help you manage your busy lifestyle.
Using Your Phone’s Datebook Tools Datebook stores up to 250 events. You can store events over a thirteen month period — twelve months after and one month before the current date. A Datebook event contains: 䢇 A subject — A name you assign to the event. You can also enter a phone number, Direct Connect number, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event. 䢇 A location — The location of the event.
Viewing Datebook To access Datebook: Press M > Datebook. 䊳 You can view Datebook by the day, by the week, or by the month. You can also view the details of any event. 䢇 In day view, brief information about each event for that day appears. 䢇 In week view, events appear as markers corresponding to their times. 䢇 In month view, days with events appear with a marker in the corner. To view an event: 1. Select the day the event occurs. 2. Select the event. To change the current view: 1.
To go to today’s date: To go to any date in Datebook: Tools 1. While viewing Datebook, press M. 2. Select Go To Today. 1. While viewing Datebook, press M. 2. Select Go To Date. 3. Select the date you want. Creating Events Every Datebook event must have a subject and be stored to a date. Other information is optional. You may enter the information in any order by scrolling through the event details.
䡲 – or – Enter a phone number, Direct Connect number, or Talkgroup number. After the event is stored, you can call this number. When you are finished, press O. 3. If you want to assign a location to the event: 䡲 䡲 䡲 Select Location. Enter the location. – or – Enter a phone number, Direct Connect number, or Talkgroup number. After the event is stored, you can call this number. When you are finished, press O. 4. The start time automatically assigned to an event is the beginning of the day.
7. If you want to make the event a recurring event: 䡲 䡲 䡲 䡲 Select Repeat. Select the repeat cycle you want. If the event occurs more than once a week: Select Multiple Day. Select the days you want. Press Done (right softkey). In the End field, select the date you want this event to stop recurring. Tools 䡲 8. If you want to create a reminder for this event: 䡲 䡲 Note Select Reminder. Select the reminder time you want. – or – Select Custom to enter a reminder time.
11. If you want to assign a Java application to start when the event starts: 䡲 Select App. 䡲 Select the application you want from the Java applications stored in your phone. 䡲 If you created a reminder for this event, your phone prompts you to start the Java application when you get the reminder. 12. If you have entered all the information you want for this event, press Done. – or – If you want to assign a ring tone, a profile, or a Java application to the event, see “Editing Events” below.
8. If you want to change more information, follow the 9. Press Done (left softkey) to store the event. Tools applicable instructions in “Creating Events” on page 127 to edit the various fields. Deleting Events To delete an event: 1. 2. 3. 4. 5. Select the day the event occurs. Select the event. Press M. Select Delete. If the event is not a recurring event, press O or press Yes (left softkey) to confirm.
For Events With Java Applications If you assigned a Java application to start when the event starts, you can start the application when you get the reminder. To start the application: 1. Press M. 2. Select Launch. Making Calls From Datebook and Datebook Reminders If you stored a phone number, Direct Connect number, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a Call Alert to that number from Datebook or from the reminder of that event.
To make a Direct Connect call or Talkgroup call: 1. Highlight or select the event containing the number you Tools want to call. 2. Press the Direct Connect button. – or – If you did not include a # before the Talkgroup you want to call: Press M. Select Talkgroup. Press the Direct Connect button. To send a Call Alert: 1. Highlight or select the event containing the number you want to send a Call Alert to. 2. Press M. Select Alert # in Event.
You can view or change these options: 䢇 Start View — sets Datebook to start in day view, week view, or month view when you access Datebook. 䢇 Daily Begin — sets the beginning of your day. This is the earliest time of day displayed in week view, if you have a twelve-hour day view. 䢇 Delete After — sets the amount of time Datebook waits to delete an event after it occurs. 䢇 Time Shift — lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone.
Installing Applications 1. Press M > Java Apps. 2. Select the application or suite of applications you want Tools To install a Java App: to install. Installation messages appear as the application installs. 3. If you want to create a shortcut to the Java application on the main menu: Press Next (left softkey). Press Yes (left softkey). Press O. 4. Press Done (left softkey). Running Applications To run an application that has a shortcut on the main menu: 1.
Suspending Applications When you suspend an application, it does not stop running. It goes to the background so that you can run another application in the foreground. To suspend an application: 䊳 Press E. To view your suspended applications: 䊳 From the Java menu, select Suspended Apps. You can have up to three applications running at one time — one running in the foreground and two in the background. Resuming Applications You can resume a suspended application at any time.
To end all applications: Press M > Java Apps. Scroll to Suspended Apps. Press M. Tools 1. 2. 3. 4. 5. 6. Select End All. Press O or press Yes (left softkey) to confirm. If you want to end all applications without letting them exit, press EndNow (right softkey). Downloading Applications If you want to run more Java applications, you can download them into your phone. Check the Downloads menu option on your phone for a catalog of items available for purchase and download. You can also go to www.nextel.
To delete all Java applications: 1. 2. 3. 4. 5. Press M > Java Apps. Scroll to Java System. Press M. Select Delete All. Press O or press Yes (left softkey) to confirm. Managing Memory To view the amount of memory available for Java applications: 1. Press M > Java Apps > Java System. 2. Press Next (left softkey). 3. To see more memory information, press Next (left softkey) again. Deleting Java applications frees memory.
3. Scroll to the application you want to create a shortcut for. Tools 4. Press O. 5. Press Done (left softkey). To remove a shortcut: 1. Press M > Settings > Personalize > Menu Options > Add/Remove Apps. – or – Press M > M > Main Menu Setup > Add/Remove Apps. 2. Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3. Scroll to the application you want to remove the shortcut for. 4. Press O. 5. Press Done (left softkey).
When you make a 911 emergency call, the GPS feature of your phone can help emergency personnel locate you if your phone has adequate access to GPS satellite signals and your emergency response center is equipped to process such information. You can also use the GPS feature to view your approximate location. Location information appears on the phone’s display. Java applications loaded on your phone can also request your location.
Walking or driving very slowly may also substantially reduce GPS performance. Tools Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Therefore, in any 911 call, always report the location to the emergency response center if you can and if you cannot, remain on your phone for as long as the emergency response center instructs you.
Making an Emergency Call Dial 911 and press S to be connected to an emergency response center. If you are on an active call, you must end it before calling 911. When you make an emergency 911 call, the GPS feature of your phone begins to seek information to calculate your approximate location. It will take the GPS feature of your phone some time to determine your approximate location.
See “Enhancing GPS Performance” on page 144 for information on how to help your phone determine your location. Tools your phone is automatically made available to the emergency response center, if the center has the capability to receive such information. Viewing Your Approximate Location To view your approximate location: 1. Press M > GPS > Position. 2. Scroll to view the entire screen.
The Position screen displays the updated information. To cancel a location calculation before it is completed: 䊳 Press Cancel (right softkey) to return to the Position screen. – or – Press E to return to standby mode. Each time approximate location of your phone is calculated, the latest location information is stored in your phone and remains there even when your phone is powered off. You will see this information the next time you view the Position screen.
Note 䢇 Tools To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location: 䢇 Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.
Updating Satellite Almanac Data Another way to keep the GPS feature of your phone working well is to keep your satellite almanac data up to date. The United States government maintains an almanac of data about where GPS satellites are as they orbit the Earth. This information is available to your phone. Keeping your satellite almanac up to date helps your phone determine your location more quickly.
Using GPS With Map Software Tools You can use the GPS feature of your phone to provide approximate location data to a laptop computer or similar device that is running interactive map software such as that made by DeLorme or Microsoft. This way, if your phone has good access to GPS signals, your approximate position on a map can be made available as you travel in a vehicle.
Software Compatibility Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format. Your phone supports output messages in NMEA-0183 format and supports the following NMEA-0183 sentences: GGA, GLL, GSA, GSV, RMC, and VTG. The map software running on your laptop or other device must support NMEA 3.0. To connect your phone to your laptop or other device: 1. Pull and rotate the connector cover. 2.
To set your phone to send location information to your laptop or other device: Tools 1. Press M > GPS > Interface. 2. Set NMEA OUT to On. Your phone is now sending location data to your laptop or other device. To stop your phone from sending location data to your laptop or other device: 䊳 Set NMEA OUT to Off. Each time you power your phone on, NMEA OUT is automatically set to Off.
Using Bluetooth® Your i335 phone is a Bluetooth device. Bluetooth devices create seamless voice and data connections with other Bluetooth devices, such as another Bluetooth phone, a Bluetooth pen, headset, or desktop adapter. These connections are made wirelessly. You can use your i335 phone to send Contacts entries, Datebook events, or pictures to another Bluetooth device. Files sent or received may be up to 1 MB. Devices must be within 32 feet (10 meters) of your phone to be recognized.
The default for hands-free devices, such as Bluetooth headsets, is Automatic. Tools Devices are automatically granted permission during the ten seconds after bonding. For more information about bonding, see “Bluetooth Bonds” on page 154. Setting Your Phone for Bluetooth You can configure the following aspects of Bluetooth: 䢇 Power. 䢇 Device name. 䢇 Voice recognition and dialing. 䢇 Find Me duration. Turning Bluetooth On or Off You can turn power to your phone’s Bluetooth feature on or off.
To rename your phone: 1. Press M > Bluetooth > Setup > Name. 2. Enter the name you want for your phone. 3. Press O. Setting a Find Me Duration You can change how long your phone remains discoverable to other devices. The default duration is one minute. See “Sharing Your Phone’s Bluetooth Address” on page 153. To select a default duration for Find Me: 1. Press M > Bluetooth > Setup > Find Me Duration. 2. Select the setting you want. Accessing Bluetooth To access Bluetooth: Press M > Bluetooth.
Sharing Your Phone’s Bluetooth Address Tools To bond with your phone, devices must have your phone’s Bluetooth address. To find devices that you want to bond with, you can make your phone discoverable, so that other devices learn your phone’s Bluetooth address. You can also have your phone search for Bluetooth devices to learn their addresses. Allowing Bluetooth Devices to Find Your Phone To let devices find your phone and its Bluetooth address, place your phone in discoverable mode.
Bluetooth Bonds A bond is an encryption key that is generated when two Bluetooth devices exchange a common PIN. This key verifies the identity of each device, and encrypts any data transferred between the devices. Once the PIN is exchanged, the devices do not have to be in discoverable mode in order to exchange information. You only need to create a bond once between two devices.
In some cases, you may not be required to enter the Bluetooth PIN. 1. Press M > Bluetooth. 2. If you want to create a bond and connect with the given Tools To create a bond between your phone and another device: device, select Hands Free > [Find Devices]. – or – If you want to create a bond to have it available for future use, select Link to Devices. 3. Select the device you want. 4. Press Yes (left softkey) if you are prompted to do so. 5. Enter a PIN if you are prompted to do so.
Using Bluetooth During a Call During a call, you can connect with available Bluetooth devices. Note If the Hands Free menu contains only one device, then your phone will automatically try to connect to that device. To use Bluetooth during a call: 1. While in a call, press M. Select Use Bluetooth. 2. Select the device you want to connect to. Disconnecting From a Device To disconnect from a device: 1. Press M > Bluetooth > Hands Free. 2. Press Drop (left softkey).
Note Viewing Device Details Tools If you delete a device from device history, you will have to find the device to connect with it. See “Discovering Bluetooth Devices” on page 153. To view the name and the access setting of a device: 1. Press M > Bluetooth > Device History. 2. Select the device you want. Editing Device Names To edit a device name so the device is easier to identify. 1. 2. 3. 4. 5. Note Press M > Bluetooth > Device History. Scroll to the device you want to rename.
Deleting Devices To delete devices: 1. 2. 3. 4. 5. Press M > Bluetooth > Device History. Scroll to the device you want to delete. Press M. Select Delete. To delete the device, press Yes (left softkey). Sending Contacts, Datebook Events, and Pictures Bluetooth lets you send Contacts entries, Datebook events, or pictures to connected devices. To send Contacts: 1. 2. 3. 4. 5. 6. Press M > Contacts. Highlight the contact you want to send. Press M. Select Send Via.... Select Bluetooth.
5. If the event you select repeats, then you will be Tools prompted to choose whether to send the selected instance of the event or all instances of the event. To send only the selected instance of the event, select This Event Only. – or – To send all instances of the event, select Repeat Events. 6. Select Bluetooth. 7. Select the device you want to transfer to. – or – Search for the device you want to transfer to by selecting [Find Devices]. 8. If prompted, bond with the device.
Receiving Items You receive a prompt when your phone has an incoming transfer. 䊳 Press Accept (left softkey) to accept the transfer. – or – 䊳 Press Reject (right softkey) to reject. Canceling Transfers You can cancel a transfer while the transfer is in progress. Note If a transfer is interrupted, the Connection Failed prompt displays. To cancel a transfer: 1. Press Cancel (right softkey). 2. Press Yes (left softkey) to cancel. – or – Press No (right softkey) to continue with the transfer.
Using Memo Tools Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1. Press M > Memo. 2. Enter the number using your keypad. 3. Press O. To view the memo later: 䊳 Press M > Memo. To delete the memo: 1. Press M > Memo. 2. Press and hold Delete (right softkey). 3. Press O. To edit the memo: 1. Press M > Memo. 2. Press and hold Delete (right softkey) to delete the number. 3. Enter the new number. 4. Press O. To make a call to the memo number: 1.
To store the memo number to Contacts: 1. 2. 3. 4. Press M > Memo. Press M. Select Store to Cntcs. To store the number as a new entry, select [New Contact]. – or – To store the number to an existing entry, select the entry. 5. With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number. 6. If you want to add more information to the entry, follow the applicable instructions in “Creating Entries” on page 118. 7. Press Done (left softkey).
To record a phone call: Note Tools 1. While on an active call, press M. 2. Select Record. 3. When you are finished recording, press O. Recording of phone calls is subject to applicable laws regarding privacy and recording of phone conversations. Playing Voice Records To play a Voice Record: 1. Press M > VoiceRecord. 2. Select the voice record you want to play. 3. To stop the voice record while it is playing, press O. Tip To fast forward, scroll right. To rewind, scroll left.
Deleting Voice Records To delete a voice record: 1. 2. 3. 4. 5. Press M > VoiceRecord. Scroll to the unlocked voice record you want to delete. Press M. Select Delete. Press O or Yes (left softkey) to confirm. To delete all voice records: 1. 2. 3. 4. 5. Press M > VoiceRecord. Scroll to any voice record. Press M. Select Delete All. Press O or Yes (left softkey) to confirm. Locking Voice Records When you lock a voice record, it cannot be deleted until you unlock it. To lock a Voice Record: 1. 2. 3. 4.
Managing Memory 1. Press M > VoiceRecord. 2. With [New VoiceRec] highlighted, press Memory (left Tools To view the amount of memory available for voice records: softkey). – or – With any voice record highlighted, press M. Select Memory. To free more memory by deleting all unlocked voice records: 1. From the voice records memory screen, press Delete. 2. Press O or Yes (left softkey)to confirm.
Using My Pictures My Pictures lets you view pictures you received in MMS messages and Direct Connect calls. You can send the pictures stored in My Pictures in MMS messages and Direct Connect calls. Viewing Pictures To view pictures stored in My Pictures: 1. Press M > My Pictures. The pictures stored are listed by name. 2. Select the picture you want to view. Note If this icon] appears next to a picture, you cannot send it in a message.
Deleting Pictures 1. Scroll to or select the picture you want to delete. 2. Press M. 3. Select Delete. Tools To delete a picture: Managing Memory To view your used memory, free memory, and memory capacity: 1. Scroll to or select any picture. 2. Press M. 3. Select Memory Size. Note Pictures are stored in your phone using the same memory space used to store Java applications data, voice records, ring tones, messages, and wallpaper images.
䢇 䢇 䢇 䢇 DC/GC Lifetime — displays the total minutes of all your Direct Connect and Group Connect calls. Circuit Reset — keeps a running total of all of your circuit data use, until you reset it. Circuit Lifetime — displays the total minutes of all of your circuit data use. Kbytes Reset — keeps a running total of the number of kilobytes sent and received by your phone, until you reset it. To view or reset a timer: 1. Press M > Call Timers. 2. Select the feature you want to view or reset. 3.
Section 3 Service Features
Section 3A Service Features: Phone Calls In This Section ⽧ Using Call Waiting ⽧ Putting a Call on Hold and Making a Second Call ⽧ Making a Three-Way Call ⽧ Using Call Forwarding ⽧ Making International Calls ⽧ Using Special Dialing Codes ⽧ Using Nextel Phone Services Now that you’ve mastered your phone’s fundamentals, it’s time to explore the calling features that enhance your service. This section outlines the service features than enhance your phone calling experience.
Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. Call Services Using Call Waiting If you are on a call and receive a second call, your phone emits a tone and displays a message. To accept the second call and put the active call on hold: 䊳 Press Yes (left softkey). To accept the second call and end the active call: 1. Press E. Your phone rings with the second call. 2. Answer the second call.
Putting a Call on Hold and Making a Second Call To place a call on hold and make a second call: 1. 2. 3. 4. Place or receive a phone call. While the call is active, press M. Select 2nd Call. This puts the call on hold. Enter the second phone number you want to call. For quick ways to enter the number, press M. Tip 5. Press S to place the call. To end the second call and make the call on hold active again: Press E.
Tip For quick ways to enter the number, press M. All three people in the call can speak to and hear each other. Note Call Services 5. Press S to place the call. 6. Press Join (left softkey). You cannot make any other calls after you have joined a three-way call, even if one party disconnects. To merge two calls into a three-way call: 1. 2. 3. 4. 5. 6. 7. Place or receive a phone call. While the call is active, press M. Select 2nd Call. This puts the call on hold.
Using Call Forwarding Call Forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: G Phone line 1 is active; calls to phone line 1 are being forwarded.
䡲 3. To enter the number you want to forward calls to: 䡲 䡲 Enter the number using your keypad. Press Search (left softkey). Select Contacts, Recent Calls, or Memo. Select the number you want to enter. Call Services To delete this number, press O, then press and hold Delete (right softkey). 4. Press O. All your calls are now forwarded to the number you specified. Turning Off Call Forwarding If you do not want all your calls forwarded, turn the feature off: To turn Call Forwarding: 1.
Note If you want a type of missed call sent to voicemail, the call forwarding number for that type of missed call must be your voicemail access number. In most cases, your voicemail access number is your area code + first three digits of your PTN + MAIL (6245). To verify your voicemail access number, contact Nextel Customer Service. To forward missed calls: 1. Press M > Call Forward > Forward > Detailed.
Viewing Call Forwarding Settings 1. Press M > Call Forward > Forward > All Calls. 2. With To highlighted, press Status (left softkey). Call Services To view Call Forwarding settings: Making International Calls Your service default is “International Calls Restricted.” Contact Nextel Customer Service to obtain international dialing access. Calls placed between the United States and Canada do not require an international access code.
Using Special Dialing Codes Non-Emergency Numbers Nextel supports many “non-emergency” numbers (such as #77, 311,...) provided by local and state governments. These numbers are used to report non-emergency incidents. If the situation includes imminent danger or loss of life, you should dial 911. Telecommunications Relay Service Nextel supports services for communicating with speech and/or hearing impaired individuals. You can dial 711 to reach a local Telecommunications Relay Center.
Contact Nextel Customer Service to obtain these services or for additional information: Note Some services are not available outside of the continental United States. Call Services Using Nextel Phone Services Caller ID Your phone can automatically display the phone number or name (if the ten-digit phone number is stored in your Contacts) of the person calling (unless blocked by the caller), enabling you to decide whether to take the call or forward it to voicemail.
Second Line Service You can have two different phone numbers on the same phone. With Second Line Service, you can: 䢇 Get separate bills for each phone line. 䢇 Bring in an existing wireless or home phone number to Nextel to activate on the second line. 䢇 Have two different area codes (must be in same market) to convey a local image to callers. 䢇 Use different ringer styles so that you can tell which line is receiving a call. 䢇 Forward incoming calls to either your primary or alternate line phone number.
Sprint 411 Section 3A: Service Features: Phone Calls Call Services Dial 411 from your wireless phone to receive nationwide listings, movie listings and showtimes, restaurant reservations, and driving directions, as well as sports scores, stock quotes, and weather conditions. Spanish speaking operators available. Receive up to three phone numbers or pieces of information per call, and be automatically connected at no additional charge. Airtime and other charges apply.
Sec tion 3B Service Features: Messages In This Section ⽧ Message Center ⽧ Receiving Messages ⽧ Using Nextel Voicemail ⽧ Using Multimedia Messages ⽧ Using SMS Messages Your phone offers you powerful messaging features that let you stay in touch using voice, text, and multi-media. This section explains how to you all your messaging features.
Message Center When you receive the following types of messages, you can access them through the message center: 䢇 Voicemail messages. 䢇 Multimedia Messaging Service (MMS) messages. 䢇 Net Alerts. 䢇 Short Message Service (SMS) messages. Messages The message center manages your messages. You can listen to or view these messages, delete them, or continue to store them in the message center. The message center also lets you create and send MMS messages.
䢇 䢇 Net Alert — access over-the-air alerts that you receive from Nextel. SMS — access SMS messages you have received. Receiving Messages When you receive a voicemail message, Multimedia Messaging Service (MMS) message, Short Message Service (SMS) message, or Net alert, you have two ways to access the message: 䢇 Respond to the message notification that appears when the message is received. 䢇 Dismiss the message notification and access the message later through the message center.
Setting Notification Options 1. Press M > Settings > Phone Calls > Notifications. 2. Select the option you want: 䡲 䡲 䡲 Messages To control whether your phone sounds message notification tones while you are on phone calls: Receive All — Tones sound during calls for all types of messages except MMS messages. Msg Mail Only — Tones sound during calls for SMS messages; tones for all other types of messages are held until you end calls.
Using Nextel Voicemail Tip To receive voicemail messages, you must first set up your voicemail box. If you are bringing your phone number from another carrier, we suggest you set up your voicemail box after the number you brought to Nextel is active on your Nextel phone and your temporary phone number is deactivated. If you set up your voicemail box prior to this, all messages and all settings (including your greeting and password) will be lost when the number you have brought to Nextel becomes active.
Messages If you press * while you are in a sub-menu, you will go to the previous menu. If you press **, you will go to the main voicemail menu. From the main voicemail menu, press # to exit voicemail. At any time, you may end the call by pressing E. Playing Messages When you receive a new voicemail message, you can either listen to it immediately by pressing Call (left softkey), or later by pressing Back (right softkey).
IMPORTANT After exiting the voicemail session, you cannot recover deleted messages. Changing Your Password To change your password: 1. From the main voicemail menu, press 4 to access personal options. 2. Press 4 to access personal preferences. 3. Press 1 to modify password. 4. Enter your new password. It must be four to seven digits. Note It is important that you choose a number that is easy for you to remember, but hard for someone else to guess.
5. Press ** to return to the main menu. You may want to include one or all of the following options in your greeting so that callers will know they are available. 䢇 Press 1 to send a numeric message. 䢇 Press 2 to send an operator-assisted message. (This option is available only if you are a subscriber of Operator Assisted Messaging. Contact Nextel Customer Service for more information.) 䢇 Press # to skip the greeting and record a message immediately.
3. Enter the greeting number you wish to create or modify. 4. Press 2 to record a greeting. 5. Record your greeting and press # when you have finished. 6. Press ** to return to the main menu. To select your active greeting: 1. From the main voicemail menu, press 3 to access the greetings menu. 2. Press 3 to select another greeting to be active. 3. Enter the number of the greeting that you would like to be active. The system will confirm your active greeting number. 4.
To activate the greeting schedule: greetings menu. 2. Press 9 to activate your greeting schedule. 3. Press ** to return to the main menu. Note Messages 1. From the main voicemail menu, press 3 to access the The greeting schedule, when on, will override any other greeting that you may set as active. If a greeting is not recorded, a system standard greeting will be played. Automatic Playback By default, the playback mode of your voicemail service is set to normal.
To select the order in which new messages should be played: 1. From the main voicemail menu, press 4 to access personal options. 2. 3. 4. 5. Press 4 to access personal preferences. Press 2 to access playback preferences. Press 1 to switch between the playback orders. Press ** to return to the main menu. Recording, Forwarding, and Replying to Messages These functions allow you to record and send, reply to, or forward a message to an assigned destination address or group list number.
Delivery Options Note Messages After you have created a message, you can assign the message to a category before you send it. Below is a list of the options that can be applied to a message: 䢇 Urgent — Recipient will hear this message before other messages. 䢇 Private — Recipient cannot copy the message to another mailbox or phone number. 䢇 Notification of Non-Delivery — You will be notified if the recipient has not listened to your message by a certain date and time.
䡲 Press 9 to send the message immediately. 3. The list of options will be presented again. Select an additional option or press 9 to send the message. 4. Enter the destination mailbox or group list number of the recipient(s). 5. Press # to send. 6. Press ** to return to the main menu. Changing Your Voicemail Language to Spanish Nextel voicemail settings can be heard in English or Spanish. Use this feature to change the language you and your callers will hear while in voicemail.
Message Forwarding You can only forward messages to Nextel customers in your home market. This feature allows you to program your phone to automatically forward incoming messages to another mailbox. There are two types of forwarding: notified and silent. Notified forwarding prompts the caller that the message will be forwarded. Silent forwarding does not prompt the caller that the message will be forwarded. Messages Note To modify forwarding options: 1.
Using Multimedia Messages Multimedia Messaging Service (MMS) lets you send and receive messages that may include text, pictures, and audio recordings. You can send and receive these messages from your phone, through any email account, and from www.nextel.com. Your MMS address is your PTN@messaging.nextel.com. Your PTN is your ten-digit Nextel Personal Telephone Number.
To open a message on the current page: Select the message you want to open. – or – Press the number on the keypad corresponding to the number of the message. Messages 䊳 Creating and Sending Messages Each message you create may contain the following fields: 䢇 To — the phone numbers or email addresses of one or more recipients. 䢇 Mesg — the body of the message. This may include text, pictures, ring tones, or voice records. 䢇 Subject — the subject line. 䢇 Attach — one or more attachments.
Entering Text In message fields that require you to enter text, you can begin entering the text from the keypad when the field is highlighted. While entering text, you can always choose a text input mode from the context-sensitive menu. For information on ways to enter text from the keypad, see “Entering Text” on page 27. Message Size You can create and send messages of up to 100 KB, including attachments. The size of the message appears at the top of the display as you are creating the message.
Creating a Message 1. Press M > Messages > [Create Mesg]. – or – Select [Create Mesg] from Inbox, Drafts, or Sent Items. – or – Begin creating a message from Contacts, the Recent Calls list, standby mode, or My Pictures. See “More Ways to Begin a Message” on page 203. – or – Reply to a received message. See “Replying to a Message” on page 201. Messages To begin creating a message: 2. To address the message: 䡲 䡲 Tip Select To. Enter the phone number or email address from the keypad and press O.
Enter text from the keypad. Use a Quick Note. See “Quick Notes” on page 206. 䡲 Insert a picture, a ring tone, or a voice record. See “Inserting Pictures, Ring Tones, and Voice Records” on page 207. When you are finished, press O. 䡲 䡲 4. If you want to send the message now, press Send (left softkey). – or – If Send is not one of your options: Press M. Select Send. – or – To fill in more message fields, see “Adding More Message Options” on page 200.
Select recipients from Contacts or the Recent Calls list. See “More Ways to Address a Message” on page 204. When you are finished addressing the message, press Back (right softkey). 䡲 Messages 5. If you want to insert replies the recipient can choose from when replying to your message, select Auto Replies. 䡲 Enter text from the keypad or select a Quick Note (see “Quick Notes” on page 206.) 䡲 When you are finished creating your list of replies, press Back (right softkey). 6.
When you reply to a message you received, some of the fields in your reply message are filled in automatically: 䢇 To — the phone number or email address of the sender of the message you are replying to. If you are sending a reply to all, some recipients may be in this field. 䢇 Mesg — the first 40 characters of the message you are replying to. Text you add to the body of your message appears above this. 䢇 Subject — “Re:” followed by the subject line of the message you are replying to, if any.
Note More Ways to Begin a Message Messages If the message you are replying to was sent with auto replies, it contains a numbered list of possible replies. Press the number of the reply you want to send. The reply is sent immediately without any further action. In addition to beginning a message from the message center, you can begin a message from Contacts, the Recent Calls list, standby mode, or My Pictures. To begin a message from Contacts: 1.
3. Press Create (left softkey). – or – If Create is not one of your options: Press M. Select Create. 4. Create and send the message. The message is automatically addressed to the phone number you chose. To begin a message from standby mode: 1. Using the keypad, enter the number you want to send a message to. 2. Press M. 3. Select Create. The message is automatically addressed to the phone number you chose. To begin a message from My Pictures: 1.
To address a message from Contacts: Tip You can search for an entry name as you would when viewing Contacts. See “Searching for a Name” on page 117. Messages When you select recipients from Contacts, Contacts entries containing phone numbers or email addresses are displayed. To address a message from Contacts: 1. While you are creating a message, scroll to or select To or Cc: 2. Press Contcs (left softkey). – or – If Contcs is not one of your options: Press M. Select Contacts. 3.
3. Select Recent Calls. 4. Select the entry containing the phone number or email address you want to send the message to. 5. If the entry contains more than one phone number or email address, select the ones you want to send the message to. When you are finished selecting items within the entry, press Done (left softkey). 6. When you are finished selecting entries, press Done (left softkey).
Inserting Pictures, Ring Tones, and Voice Records You can insert more than one of these objects into a message. You may include text in the body of your message in addition to these objects. Note Messages When you are filling in the Mesg field, you can insert pictures, ring tones, and voice records into the body of the message. For information on how objects inserted into the body of a message appear when a message is received, see “Embedded Objects and Attachments” on page 215.
To insert a ring tone: 1. While you are filling in the Mesg field, press M. 2. Select Insert Ring Tone. A list of ring tones that can be included in a message appears. 3. Select the ring tone you want to insert. Tip To hear a ring tone before inserting it, highlight the ring tone. Inserting Voice Records You can insert voice records from your list of voice records. Voice records created by recording a phone call cannot be included in a message. To insert a voice record: 1.
Attaching Pictures, Ring Tones, and Voice Records Note For information on how attachments appear when a message is received, see “Embedded Objects and Attachments” on page 215. Messages You can attach one or more pictures, ring tones, and voice records to a message. Attaching Pictures You can attach pictures from My Pictures. Pictures that you download to your phone or receive in a message may be forward locked, meaning they cannot be included in a message.
Attaching Ring Tones You can attach ring tones from your list of ring tones. Ring tones that are pre-loaded on your phone cannot be included in a message. Ring tones that you download to your phone or receive in a message may be forward locked, meaning they cannot be included in a message. To attach a ring tone: 1. While you are creating a message, select MORE and then select Attach. 2. Select [New]. 3. Select Ring Tones. A list of ring tones that can be included in a message appears. 4.
Tip Removing an Attachment To remove an attachment in a message you are creating: Messages To hear a voice record before attaching it, highlight the voice record and press Play (left softkey). 1. While you are creating a message, select MORE and then select Attach. 2. Scroll to the attachment you want to remove. 3. Press M. 4. Select Unattach. Attaching New Voice Records While you are creating a message, you can create voice records and attach them to the message. To create a new Voice Record: 1.
Drafts While you are creating a message, you can save it in Drafts before you send it. You can view, edit, send, or delete saved drafts. Saving a Message in Drafts To save a message in Drafts: 1. While you are creating a message, press M. 2. Select Save. You can continue to create the message. The version you saved in Drafts will not change. Sending a Draft To send a Draft: 1. 2. 3. 4. Press M > Messages > Drafts. Scroll to the draft you want to send. Press M. Select Send.
3. Press O or press Yes (left softkey) to confirm. M Draft. w High priority. L Attachment. y High priority with an attachment. Messages Drafts Icons Sent Items Messages you have sent or tried to send are stored in Sent Items. Forwarding Sent Items To forward a sent item: 1. 2. 3. 4. 5. Press M > Messages > Sent Items. Scroll to the message you want to forward. Press M. Select Forward. Edit and send your message. You can add to and edit the message you are forwarding.
Note If your message was sent successfully, Resend will not appear as an option. Checking Delivery Status If a message was successfully sent and you set the message to give a report confirming delivery, you can check the delivery status. To check the delivery status: 1. 2. 3. 4. Press M > Messages > Sent Items. Scroll to the message you want to view. Press M. Select Delivery Status. Deleting To delete a message: 1. Scroll to the message you want to delete. – or – View the message you want to delete.
Receiving a Message To view the message: 1. Press O or press Read (left softkey). The message is Messages When you receive an MMS message, a message notification appears on the display. downloaded from the message server. 2. If the message fills more than one screen, scroll to read it. To dismiss the message notification: 䊳 Press Later (right softkey). This icon w appears on the display, reminding you that you have a new message.
Opening Attachments To open an attachment. 1. View the message. 2. Highlight the attachment you want to open. Attachments appear at the end of a message. 3. Press O. Note Attachments that are of an unknown type cannot be opened, but they can be deleted. See “Deleting Attachments” on page 222. Viewing a Slide Show Your phone can receive MMS messages containing slide shows. A slide show may contain a series of pictures that display in sequence. It may also include one or more audio recordings.
To view received messages from the Message Center: 1. Press M > Messages > Inbox. 2. Select the message you want to read. If you have not Messages Viewing Received Messages From the Message Center viewed the message before, the message is downloaded from the message server. 3. If the message fills more than one screen, scroll to read it. Inbox Icons u Unread message. T Read message. r Reply sent. N Forwarded. O Locked. w High priority. L Attachment. x Locked, with an attachment.
Actions for Received Messages Deleting To delete unread messages: 1. Scroll to the message you want to delete. 2. Press Delete (left softkey). 3. Press O or press Yes (left softkey) to confirm. To delete read messages: 1. Scroll to the message you want to delete. – or – View the message you want to delete. 2. Press M. 3. Select Delete Message. 4. Press O or press Yes (left softkey) to confirm. Forwarding To forward a message: 1. View the message you want to forward.
To lock a message: – or – If you have already viewed the message, scroll to it. 2. Press M. 3. Select Lock Message or Unlock Message. Messages 1. View the message you want to lock or unlock. Calling a Number in a Message If a message you receive contains a phone number, Direct Connect number, or Talkgroup ID, you can call or send a Call Alert to that number. These numbers may appear in the From field, the To field, the Cc field, the subject line, or the body of the message.
To make a Group Direct Connect call to a Talkgroup ID in a message: 1. 2. 3. 4. 5. View the message. Highlight the Talkgroup ID you want to call. Press M. Select Talkgroup. Press the Direct Connect button. Storing Message Information to Contacts If a message you receive contains a phone number, Direct Connect number, Talkgroup ID, or an email address, you can store this information to Contacts.
Going to a Web Site To go to a Web site from a message: 1. 2. 3. 4. Note View the message. Messages If a message contains one or more Web site URLs, you can go to the Web site. Highlight the Web site URL you want to go to. Press M. Select Go To Website. The entire URL must appear in the message. Otherwise, you cannot go to the Web site. Saving an Embedded Picture or Voice Record To save an embedded picture or voice record: 1. 2. 3. 4. View the message.
Saving Attachments To save an attachment: 1. 2. 3. 4. View the message. Highlight the attachment you want to save. Press M. Select Save Attachment. Pictures are saved to My Pictures. Voice records are saved to your voice records. Deleting Attachments To delete an attachment: 1. 2. 3. 4. 5. View the message. Highlight the attachment you want to delete. Press M. Select Delete Attachment. Press O or press Yes (left softkey) to confirm.
To save the voice records in a slide show: View the slide show. When the picture you want to save appears, press M. Select Save Audio. If the slide show contains more than one voice record, select the voice record you want to save. Messages 1. 2. 3. 4. Deleting Slide Shows 1. Highlight the slide show or view the slide show. 2. Press M. 3. Select Delete Slideshow. Customizing MMS The Setup menu lets you customize MMS for your phone: 䢇 Friendly Name — Enter text here to create a friendly name.
automatically; set the option to Manual if you want your phone to prompt you before downloading new messages. Cleanup — controls how long messages remain in the Inbox and Sent Items before they are deleted. 䢇 To access the Setup menu: 1. Press M > Messages. 2. With [Create Mesg] highlighted, press M. 3. Select Setup. Tip This option is available from many context-sensitive menus when you are using MMS. New Quick Notes and Reply Phrases To create a new Quick Note or Reply Phrase: 1.
Deleting Quick Notes and Reply Phrases To delete a Quick Note or reply phrase: 1. From the Setup menu, select Quick Notes or Replies. 2. Scroll to the Quick Note or reply phrase you want to Messages You can delete only Quick Notes and reply phrases you have created. delete. 3. Press Delete (right softkey). 4. Press O or press Yes (left softkey) to confirm. To delete all Quick Notes or all reply phrases: 1. 2. 3. 4. From the Setup menu, select Quick Notes or Replies. Press M. Select Delete All.
䢇 䢇 3 Days — Messages are deleted if they are older than three days Custom — Lets you create a clean-up option of up to 99 messages or 99 days. To set the clean-up option for the Inbox: 1. From the Setup menu, select Cleanup > Inbox. 2. Choose a clean-up option. 3. To automatically delete messages now, press O or press Yes (left softkey). – or – To delete messages later, press No (right softkey). To set the clean-up option for Sent Items: 1. From the Setup menu, select Cleanup > Sent Items. 2.
Managing Memory Note The content of a message in the Inbox is not stored in your phone’s memory until the message is read. Unread messages use very little memory. Messages All messages in the Inbox, Drafts, and Sent Items share the same memory space. To view your used memory, free memory, and memory capacity: 1. Press M > Messages. 2. With [Create Mesg] highlighted, press M. 3. Select Setup > Memory Size. Tip This option is available from many context-sensitive menus when you are using MMS.
Deleting Multiple Messages You can delete read, unlocked messages from the Inbox, messages in Drafts, or successfully sent messages in Sent Items in groups or all at once. To delete more than one message: 1. 2. 3. 4. Scroll to or view a message. Press M. Select Delete Multiple. Select the messages you want to delete by scrolling to them a pressing O. A checkmark appears next to messages that are selected. 5. Press Delete (right softkey). 6. Press O or press Yes (left softkey) to confirm.
Your phone attempts to deliver these messages for up to seven days. Messages If your phone is powered off when you receive a message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area. Receiving a Message When you receive a text and numeric message, New Txt Message appears on the display. To view the message: 1. Press Read (left softkey). 2. If the message fills more than one screen, scroll to read it.
4. To keep the message, press O. – or – To delete the message, scroll to the end of the message, then press Delete (left softkey). Calling and Storing Numbers If an SMS message you receive contains a phone number, you can call that number by pressing S while viewing the message. If an SMS message you receive contains a phone number, Direct Connect number, or Talkgroup ID, you can call or send a Call Alert to that number, or store that number to Contacts.
S ec t i o n 3 C Data Services Data Services In This Section ⽧ Using Wireless Data Services ⽧ Digital Rights Management (DRM) ⽧ Using Your Phone as a Modem Data services offers easy and amazing features you will really use. These features – including messaging, games, applications, downloadable ringers and screen savers, and portable Web access – let you have fun, stay in touch, and stay informed no matter where you go on the Nextel National Network.
Using Wireless Data Services You can use your phone to access a suite of wireless data products known as Wireless Data Services. Services include Multimedia Messaging, Instant Messaging, Wireless Web, Address Book, Mobile Email and more. Most services require the activation of a rate plan with Wireless Data Services or the separate purchase of a Wireless Data Services plan. To order, call 1-800-777-4681 or contact your Nextel sales representative.
䢇 Instant Messaging — send and receive instant messages through a phone-based interface (includes access to AOL® Instant Messenger™, MSN Messenger®, and Yahoo! Messenger®). You must first enable security, on your phone, to receive Wireless Data Services. Enabling security secures your data during over-the-air transmission to and from your phone.
Navigation Keys 䢇 Home—Press O to return to your home page. Press O twice to return to your standby mode Tip 䢇 Back—Press * to return to a previous screen. Tip While navigating through Wireless Data Services screens, a number may appear to the left of the application or topic you want to access. Press the corresponding number on the keypad for quicker access to that application or topic.
Digital Rights Management (DRM) DRM limits items to time-based or count-based usage settings. Time-based settings let you use the given item for a specified interval. Examples of time-based settings include being able to use an item for a specified number of days from the date of purchase, a specified number of days from the date that the item is first used, or a specified number of minutes. Count-based settings let you use an item for a specified number of times after you download it or for unlimited use.
To view the license of a DRM item: 1. Go to the location on your phone that contains the item you want. 2. Highlight the DRM item you want to view license information for. 3. Press M. 4. Select License Info. Renewing DRM Licenses Note You can only renew DRM licenses if the license contains a link to the page where you purchased the item. To renew a DRM License: 1. Go to the location on your phone that contains the item you want. 2. Highlight the DRM item you want to renew. 3.
Note Under certain conditions, third-party vendors will let you download an item multiple times within a given time frame, even if you deleted the item. Please contact the third-party vendor of an item to learn more about the vendor’s download regulations. 1. Go to the location on your phone that contains the item you want. 2. Highlight the DRM item you want to delete. 3. Press M. 4. Select Delete. Data Services To delete an item: 5. If prompted, press Yes (left softkey).
Using Your Phone as a Modem To use your phone as a modem with a laptop, handheld device, or desktop computer: 䊳 Insert the data plug into the data port of the other device. When used as a modem, your phone has these data transfer modes: 䢇 Circuit data — used for sending and receiving faxes and for transferring large files. 䢇 Packet data — used for small file transfers such as email.
Section 4 Safety and Warranty Information
Section 4A Important Safety Information In This Section ⽧ Safety and General Information ⽧ Export Law Assurances ⽧ Specific Absorption Rate Data ⽧ Information From the World Health Organization ⽧ Product Registration ⽧ Wireless: The New Recyclable ⽧ California Perchlorate Label ⽧ Patent and Trademark Information ⽧ Software Copyright Notice ⽧ Privacy and Data Security ⽧ Smart Practices While Driving This phone guide contains important operational and safety information that will help y
Safety and General Information Safety Information This section contains important information on the safe and efficient operation of your phone. Read this information before using your integrated multi-service portable radio.* Exposure to Radio Frequency (RF) Energy Your phone contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.
䢇 䢇 䢇 Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999. Australian Communications Authority Radio communications (Electromagnetic Radiation - Human Exposure) Standard 2003. ANATEL, Brazil Regulatory Authority, Resolution 303 (July 2, 2002) "Regulation of the limitation of exposure to electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz.
is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance). When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips. If you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case or body harness.
In an aircraft, turn off your radio product whenever instructed to do so by airline staff. If your radio product offers an airplane mode or similar feature, consult airline staff about using it in flight. Implantable Medical Devices If you have an implantable medical devices, such as a pacemaker or defibrillator, consult your physician before using this radio product.
facilities that may be using equipment that is sensitive to external RF energy. Driving Precautions Check the laws and regulations on the use of radio products in the area where you drive. Always obey them. When using your radio product while driving, please: 䢇 Give full attention to driving and to the road. Using a phone may be distracting. Discontinue a call if you can’t concentrate on driving. 䢇 Use hands free operation, if available.
facilities, or areas where the air contains chemicals or particles, such as grain, dust or metal powders. When you are in such area, turn off your handset, and do not remove, install, or charge batteries unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL approved). In such areas, sparks can occur and cause an explosion or fire.
Symbol Definition Do not let your battery, charger, or phone get wet. Listening at full volume to music or voice through a headset may damage your hearing. Choking Hazards Your portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children.
disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired. Caution About High Volume Usage Listening at full volume to music or voice through a headset may damage your hearing.
Export Law Assurances Service & Repairs This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade.
Specific Absorption Rate Data SAR Data ALL MODELS WITH FCC ID IHDT56HG2 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.53 W/kg and when tested on the body, as described in this user guide, is 1.55 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.
Hearing Aid Compatibility HAC A number of Motorola phones have been tested for hearing aid compatibility. When some wireless phones are used with certain hearing aids, users may detect a noise which can interfere with the effectiveness of the hearing aid. Some hearing aids are more “immune” than others to this interference noise, and phones can also vary in the amount of interference noise they may generate. ANSI standard C63.
“T” Rating: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing aid's telecoil (“T Switch” or “Telephone Switch”) than unrated phones. (T4 is the “better” or higher of the two ratings.) On those models with a telecoil mode setting, this rating is determined only with the phone so set. For setting instructions, see “Features for the Hearing Impaired” in the section entitled “Advanced Calling Features”. Note that not all hearing aids have telecoils in them.
Information From the World Health Organization WHO Information Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your children’s RF exposure by limiting the length of calls or by using hands-free devices to keep mobile phones away from your head and body. Source: WHO Fact Sheet 193. Further information: http://www.who.int./peh-emf.
Product Registration Registration Online Product Registration: http://direct.motorola.com/hellomoto/ Motosupport/source/ registration.asp Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage. Please retain your original dated sales receipt for your records.
Wireless: The New Recyclable Recycling Your wireless phone can be recycled. Recycling your phone reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products. The Cellular Telecommunications Industry Association (CTIA) and its members encourage consumers to recycle their phones and have taken steps to promote the collection and environmentally sound recycling of end-of-life devices.
California Perchlorate Label Label Some mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label: “Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.” There is no special handling required by consumer.
Patent and Trademark Information Patent and Trademark MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2007 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information. This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.
Software Copyright Notice Section 4A: Important Safety Information Important Safety Information The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software.
Privacy and Data Security Privacy and Data Security Motorola understands that privacy and data security are important to everyone. Because some features of your phone may affect your privacy or data security, please follow these recommendations to enhance protection of your information: 䢇 Monitor access: Keep your phone with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.
Smart Practices While Driving Driving SafeDrive Safe, Call Smart SM SM Drive Safe, Call Smart Check the laws and regulations on the use of mobile devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. Contact www.motorola.com/callsmart for more information. Your mobile device lets you communicate by voice and data— almost anywhere, anytime, wherever wireless service is available and safe conditions allow.
䢇 䢇 䢇 䢇 䢇 䢇 weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility, driving safely. Dial sensibly and assess the traffic; if possible, place calls when your car is not moving or before pulling into traffic.
Sec tion 4B Manufacturer’s Warranty In This Section ⽧ Motorola Limited Warranty for the United States and Canada ⽧ Service and Repairs Your phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section. Section 4B: Manufacturer’s Warranty Warranty For information regarding the terms and conditions of service for your phone, please visit www.nextel.
Motorola Limited Warranty for the United States and Canada What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
Products Covered Consumer and Professional Two-Way Radio Accessories. Length of Coverage Ninety (90) days from the date Products and Accessories that are Repaired or Replaced. The balance of the original warranty or for ninety (90) days of purchase by the first consumer purchaser of the product. from the date returned to the consumer, whichever is longer. Exclusions Section 4B: Manufacturer’s Warranty Warranty Normal Wear and Tear.
board serial numbers; or (d) nonconforming or non-Motorola housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage. Software Products Covered Length of Coverage Software. Applies only to Ninety (90) days from the date of purchase.
limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Service and Repairs If you have questions or need assistance, we’re here to help. Go to www.motorola.com/iden, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-800-453-0920 (United States), 1-877-483-2840 (TTY/TDD United States for hearing impaired).
Index Numerics 3-way Calling 173 A Accessories 26 Charger 26 Li-Ion Battery 26 Applications see also Java Applications 135 Attachments 215 see also MMS Messages, Attachments B Backlight 79 Battery 13–18 Capacity 13 Charging 17 Installing 16 Removing 17 Baud rate 84 Bluetooth 150 Access Settings 150 Access Settings, Editing 157 Accessing 152 Bonds 150, 154 Connections, Making 152 Deleting Received Items 160 Device Details 157 Device Names, Editing 157 Devices, Deleting 158 Devices, Disconnecting 156 Devices,
Addressing MMS Messages 205 Capacity 122 Creating Entries 118 Creating MMS Messages 203 Deleting 121 Editing Entries 120 Erasing 113 Icons 115 Searching 117 Showing All Entries 117 Showing Only Direct Connect 117 SIM Card 115 Storing Fast 120 Storing from Memo 162 Storing from MMS Messages 220 Storing from Recent Calls 76 Storing from Standby Mode 120 Type 115 Viewing 116 Voice Name 119 D Data Services 231–238 Datebook Profiles 129 DC/GC Options 81 see also Direct Connect Calls, Group Connect Calls, and Cal
Non-Emergency Numbers 178 Telecommunications Relay Service 178 Digital Rights Management , see DRM Direct Connect One Touch, Setting 93 Direct Connect Number and Groups 49 Viewing 19 Direct Connect Numbers 42 Direct Send see Pictures, Sending Groups 60 Direct Talk 65 Code 66 Private Only 67 Receiving All Calls On Channel 69 Setting Up 66 Display Backlight 79 Drafts 196, 212 see also MMS Messages, Drafts Icons 213 DRM 235 Count-Based Usage 235 Definition 235 Deleting Items 89, 237 Expired Items 237 Managing
Icons 22, 52 Making Calls 46 Receiving Calls 47 Removing Members 50 Sending with Direct Send 60 Settings 81 Starting with Direct Connect Numbers 49 Storing Faster 50 H Headset 94 Hearing Aid Compatibility 252 I Icons Bluetooth 22 Contacts 115 Drafts 213 Groups 22, 52 Inbox 217 Sent Items 214 Talkgroups 22 Text Entry 27 Inbox 196, 217 Icons 217 International Numbers 177 K Key Functions 9 L Language 79 M Memo 161 Calling from 161 Creating 161 Editing 161 Storing to Contacts 162 Viewing 161 Memory Java Appli
Deleting 214, 218, 225, 228 Drafts 212 Embedded Objects 215 Forwarding 213, 218 Going to Web Site 221 Inbox 217 Locking 218 Memory 183, 227 Message Center 217 Quick Notes 206, 224 Receiving 215 Removing an Inserted Item 208 Sending 197, 212, 213 Sent Items 213 Setting Up 223 Slide Shows 216 Storing to Contacts 220 MMS messages slide shows 222, 223 Multimedia Messages, see MMS Messages Mute 41 My Info Editing 20 Receiving 59, 74 Sending 56 N Nextel Wireless Data Services 232 Nextel Customer Service 6 Nextel
Creating 97 Datebook 129 Deleting 98 Editing 98 Switching 95 Temporary 96 Viewing 95 Q Quick Notes 206, 224 see also MMS Messages, Quick Notes S Safety Radio Frequency 241 RF Energy Interference 243 Safety Information 241 Safety Tips 261 Security 83, 104–113 Sent Items 196, 213 Icons 214 see also MMS Messages, Sent Items Service Account Passwords 5 Activation 3 Nextel Customer Service 6 Operator Services 6 Setting Up 2 Voicemail 4 www.nextel.
Removing 12 Security 105 SIM PIN 83 Slide Shows see MMS Messages, Slide Shows SMS Messages Calling From 230 SMS messages 228 Speakerphone 40 Speed Dial 39, 116, 119 Standby Mode Creating MMS Messages 204 Storing to Contacts 120 T T9 Text Input, see Text Entry Talkgroup 62 Join 63 Talkgroups Icons 22 Settings 81 TDD/TTY Devices 178 Telecommunications Relay Service 178 Text and Numeric Messages see SMS Messages Text Entry 27 Database 27, 28 Icons 27 Mode 27 Word Mode 27 Three-Way Calling 172 Transmitters 23,
Demos 234 Downloads 232 Guides 234 Instant Messaging 233 MMS 232 Mobile Email 232 Navigating 234 Ordering Plan 232 Web Service 232 Word Mode 27 Index Index 277
