User`s guide
Table Of Contents
- i580 Phone User’s Guide
- DECLARATION OF CONFORMITY
- Getting Started
- Making Calls
- MOTOtalkTM
- Call Alerts
- Recent Calls
- Contacts
- Call Forwarding
- Advanced Calling Features
- Group Calls and Selective Dynamic Group Calls
- Memo
- Ring Tones
- Entering Text
- Messages
- Voice Mail Messages
- MOSMS Messages
- Using PTX Features
- PT Manager
- My Info
- Datebook
- Using a Memory Card
- Camera
- Media Center
- Audio Player
- Digital Rights Management
- Java Applications
- Bluetooth®
- GPS Enabled
- Voice Records
- Customizing Your Phone
- Profiles
- Shortcuts
- Using a Headset
- Understanding Status Messages
- Safety and General Information
- Hearing Aid Compatibility
- Caring for the Environment by Recycling
- MOTOROLA LIMITED WARRANTY
- Limited Warranty Motorola Communication Products (International)
- Patent and Trademark Information
- Index
- Driving Safety Tips
25
Exiting MOTOtalk
Exiting MOTOtalk
To switch to network mode:
1 From the MOTOtalk idle screen, press m.
2 Scroll to MT Options and press O.
3 Select Exit MOTOtalk.
Tip: You can also exit MOTOtalk from the
MOTOtalk idle screen by pressing e for 3
seconds.
Switching to Network Please Wait displays.
After a few seconds, the network idle screen
appears.
Talk Range
While in MOTOtalk mode, phones should be a
minimum of 6 feet apart to maximize performance
and improve transmission range.
Channels and Codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies.
Other parties may be talking on the same channel.
Codes minimize interference from other parties
when you are sharing the same channel.
MOTOtalk opens to the last code and channel
used on your phone. You can view the code and
channel your phone is currently set to on the
MOTOtalk idle screen.
For code calls, all parties must be on the same
channel and code. For private MOTOtalk calls, the
person you are calling must be in MOTOtalk and
set to the same channel to receive your call.
Note: When making a code call, all parties that
are on your code and channel can hear
your conversation.
Setting Channels and Codes
To set a channel:
1 From the MOTOtalk idle screen, press A under
Edit.
2 Scroll to Channel.
3 Press A under Edit.
4 Select a channel.
5 When you are finished, press A under Back to
return to the MOTOtalk idle screen.
To set a code:
1 From the MOTOtalk idle screen, press A under
Edit.
2 Scroll to Code.
3 Press A under Edit.