User`s guide
Table Of Contents
- i580 Phone User’s Guide
- DECLARATION OF CONFORMITY
- Getting Started
- Making Calls
- MOTOtalkTM
- Call Alerts
- Recent Calls
- Contacts
- Call Forwarding
- Advanced Calling Features
- Group Calls and Selective Dynamic Group Calls
- Memo
- Ring Tones
- Entering Text
- Messages
- Voice Mail Messages
- MOSMS Messages
- Using PTX Features
- PT Manager
- My Info
- Datebook
- Using a Memory Card
- Camera
- Media Center
- Audio Player
- Digital Rights Management
- Java Applications
- Bluetooth®
- GPS Enabled
- Voice Records
- Customizing Your Phone
- Profiles
- Shortcuts
- Using a Headset
- Understanding Status Messages
- Safety and General Information
- Hearing Aid Compatibility
- Caring for the Environment by Recycling
- MOTOROLA LIMITED WARRANTY
- Limited Warranty Motorola Communication Products (International)
- Patent and Trademark Information
- Index
- Driving Safety Tips
26
MOTOtalk
TM
4 Select a code.
5 When you are finished, press A under Back to
return to the MOTOtalk idle screen.
Making Code Calls
To make a code call:
1 From the MOTOtalk idle screen or the channel
and code edit screen, press and hold the PTT
button. Transmit appears on the first line of
display. Begin speaking after your phone emits
the MOTOtalk tone.
Note: The MOTOtalk tone consists of 4 rapid
beeps.
2 Release the PTT button to listen.
If you receive an error message:
• No one is on your channel or code.
• You are out of range.
Receiving Code Calls
When you receive a code call, Receive will appear
on the display. After hearing the MOTOtalk tone,
you have 6 seconds to reply before the call times
out.
To reply to the call, press the PTT button.
Note: An incoming MOTOtalk call can be
terminated at any time by pressing e.
Receiving All MOTOtalk Calls
If you set the code to Receive All, your phone can
receive MOTOtalk transmissions from any phone
that is set to the same channel, regardless of the
code (1-15). When you receive transmissions with
the code set to Receive All, the code that the
transmission was received on will replace Receive
All on the display.
Note: You cannot initiate a code call when the
code is set to Receive All.
To set the code to Receive All:
1 From the MOTOtalk idle screen, press A under
Edit.
2 Scroll to Code.
3 Press A under Edit.
4 Select Receive All.
5 When you are finished, press A under Back to
return to the MOTOtalk idle screen.
To reply to a call with the code set to Receive All:
Press the PTT button.