User`s guide

48
Contacts
Creating Pauses and Waits
When storing a number, you can program your
handset to pause or wait between digits while dialing.
A pause makes your handset pause for 3 seconds
before dialing further. A wait makes your handset
wait for your response before dialing further.
This feature is useful when using voice mail or other
automated handset systems that require you to dial a
phone number and then enter an access number.
To program a pause:
Press and hold * until the letter P appears. The P
represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your handset dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
If you want a pause longer than 3 seconds, press and
hold * more than once. Each P represents a
3-second pause.
To program a wait:
Press and hold * until the letter W appears. The
W means your handset waits before dialing further.
If you store 17035551235W1234, when you select
this number and make a call, your handset dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits. Press
A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while dialing
a number from the keypad. See “Creating
Pauses and Waits While Dialing” on page 53.
International Numbers
When storing a number that you plan to use for
international calls, use Plus Dialing:
1 Press and hold 0 for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and handset number.
For information about making international calls, see
“Making International Calls” on page 53.