Nextel Direct Connect ® Make a Direct Connect Call 1. Enter a Direct Connect (DC) number using your dialpad. Make sure to include asterisks (*) when entering DC numbers. Web Launch the Browser • Select > Opera Mini. – or – Select a Direct Connect Entry from Contacts or Call log. 2. Press and hold the Direct Connect button on the side of the phone. Begin speaking after your phone emits a chirping sound. Continue holding the Direct Connect button until you have finished speaking. 3.
Navigating • Press the navigation key to highlight options and then press the center of the navigation key (r)to select a highlighted option. • Select Apps to display the Applications menu. • Press Home (X) from any page to display the home screen. Voicemail All unanswered phone calls are transferred to your voicemail, even if your phone is in use or turned off. See the Get Started guide to set up your voicemail as soon as your phone is activated. Retrieve Your Voicemail From your wireless phone: 1.
User Guide MOTOROLA i886 www.sprint.com ©2010 Sprint. Sprint and the logo are trademarks of Sprint. Other marks are the property of their respective owners.
Motorola Mobility, Inc. Consumer Advocacy Office 600 North US Hwy 45 Libertyville, IL 60048 www.hellomoto.com Note: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement or warranty service, please contact the Motorola Customer Support Center at: 1-800-453-0920 (United States) 1-877-483-2840 (TTY/TDD United States for hearing impaired) Product Support: www.motorola.
DECLARATION OF CONFORMITY FCC Notice to Users Per FCC CFR 47 Part 2 Section 2.1077(a) The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID: IHDT56KQ1 on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 3. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Use and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii 1. Setting Up Service . . . . . . . . . . . . . . . . . . . 1 Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . Setting Up Voicemail . . . . . . . . . . . . . . . . . . . . . . . . Account Passwords . . . . . . . . . . . . . . . . . . . . . . . .
Sprint Phone Services . . . . . . . . . . . . . . . . . . . . . 60 5. Viewing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . Adding a Number to an Entry . . . . . . . . . . . . . . . Editing Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting a Ringtone for an Entry . . . . . . . . . . . . Assigning a Picture to an Entry . . . . . . . . . . . . . . Import and Export Contacts . . . . . . . . . . . .
Connecting and Disconnecting Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 13. Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Music Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . Set Up Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . Get Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Play Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 103 103 104 S1.
Introduction This User Guide introduces you to your wireless service and all the features of your new phone. Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service. The Table of Contents and Index will also help you quickly locate specific information. Note: Because of updates in phone software, this printed guide may not be the most current version for your phone. Visit www.sprint.
Use and Care Use & Care Your mobile device is designed to resist damage from exposure to certain rugged conditions. However, avoid prolonged or extreme exposure to those conditions. To help protect your mobile device, always make sure the battery compartment and any connector covers are closed and secure, and observe the following precautions: extreme heat or cold Avoid temperatures below 0°C/32°F or above 45°C/113°F. shock and vibration Avoid dropping your mobile device.
1. Setting Up Service 1. Make sure your SIM card is in place. 䡲 ⽧ Setting Up Your Phone (page 1) ⽧ Setting Up Voicemail (page 3) ⽧ Account Passwords (page 4) ⽧ Getting Help (page 4) Setting Up Service Setting Up Your Phone See “Your SIM Card” on page 9. 2. Install the battery. 䡲 See “Installing the Battery” on page 13. 3. Press and hold End/Power " for two seconds to turn the phone on. If your phone is activated, it will turn on, search for service, and display the setup wizard.
4. Use the MOTOROLA i886 setup menu to select a language, set up an email account, and import SIM contacts (if applicable). 䡲 See “Setup Menu” on page 2. 5. Make your first call. 䡲 䡲 Enter a phone number. Press Talk `. Tip: If your phone keypad is locked, press Menu h > * to display the home screen. Note: Your phone’s battery should have enough charge for your phone to turn on and find a signal, set up your voicemail, and make a call. You should fully charge your battery as soon as possible.
phone, select Email and follow the prompts to enter your account information. 3. To import contacts from your SIM card to your phone, select SIM contacts > Import SIM contacts. This step is only applicable if you are using a SIM card from a previous phone and you want to import contacts stored on the SIM card to your phone. See “Import and Export Contacts” on page 87 for further details. 䡲 4. When you are finished with setup, select Exit Setup to display the Home screen.
Account Passwords Getting Help With Sprint service, you enjoy unlimited access to your personal account information and voicemail account. To ensure that no one else has access to your information, you need to create passwords to protect your privacy. Managing Your Account Account Username and Password If you are the account owner, you will create an account username and password when you sign on to www.sprint.com. (Click Sign in and then click Sign up now! to get started.
Dial *7 and then press Talk ` to add a new line of service, upgrade your device, purchase accessories, or access other account services. Setting Up Service 䢇 From Any Other Phone 䢇 䢇 Sprint Customer Service: 1-800-639-6111. Business Customer Service: 1-877-639-8351. Operator Services Operator Services provides assistance when you place collect calls or when you place calls billed to a local telephone calling card or third party. 䊳 Dial 0 and then press Talk `.
Your Phone 2. Phone Basics ⽧ Your Phone (page 6) ⽧ SIM Card, Memory Card, and Battery Information (page 9) ⽧ Turning Your Phone On and Off (page 15) ⽧ Home Screen (page 16) ⽧ Navigating Through Menus and Options (page 19) ⽧ Displaying Your Numbers (page 20) ⽧ Entering Text (page 21) ⽧ Tips and Tricks (page 22) ⽧ Battery Cool Down (page 23) ⽧ Dual Microphone Noise Cancellation (page 23) ⽧ Accessories (page 24) Note: The use of wireless phones while driving may cause distraction.
1. Speaker Button ()) lets you turn the speaker phone on or off during a call. From the home screen, pressing the Speaker button turns Direct Connect speaker mode on and off. 2. Volume Buttons let you adjust the ringer volume from the home screen, the voice or speaker volume during a call, and the speaker volume while using the music player or other applications. 3. Direct Connect (DC) Button lets you use Nextel Direct Connect®. (See page 30.) 4.
Landscape Phone Features Rotate the phone counter-clockwise and slide out the QWERTY keyboard. The screen automatically adjusts to landsacpe (Widescreen) mode. 1. QWERTY Keyboard provides a full keyboard. It lets 10:10 PM 12 12 9 9 3 3 6 6 Messaging Messag Messaging g g Contacts Con C ntactss Call log Opera Oper p ra Mini Min ni 3. 10:10 AM 12 12 9 9 3 3 6 6 10:10 AM Messaging Contacts Call log Opera Mini 12 12 9 9 ? 3 3 4. 6 6 Messaging Contacts Call log 5. 6. Opera Mini 7.
onscreen options. SIM Card, Memory Card, and Battery Information Your SIM Card Important: The SIM card is designed for optimal Contacts storage and feature use. For SIM card compatibility information, visit www.nextel.com/sim. In some cases, Contacts and Groups may not be accessible if you move your SIM card to another phone. Contacts and Groups created with your MOTOROLA i886 may not be readable by an older iDEN SIM-based phone. Phone Basics 12.
Removing and Inserting the SIM Card Important: To avoid losing information stored in your SIM card, do not remove it from your phone unless absolutely necessary. 2. Press the tab in front of the SIM card, and then use your thumbs to carefully slide it out from under the edge. To remove your SIM card: 1. With your phone powered off, lift the battery door latch and lift and remove the battery door. 1 Note: Protect your SIM card as you would any delicate object. Store it carefully. 2 10 2.
To insert your SIM card: 1. With your phone powered off, lift the battery door 2. Carefully slide the SIM card into your phone until it lies flat in the SIM card holder. latch and lift and remove the battery door. Phone Basics 1 2 Important: Do not touch the gold-colored areas of your SIM card. 3. Replace the battery door, pressing down firmly on it to ensure it is secured properly. 2.
2. Open the memory card slot cover and slide in the Memory Card memory card until it clicks into place. A microSD memory card is provided with your phone. The provided memory card contains helpful preloaded information, including guided tours of your phone’s features. Insert the Memory Card 1. With your phone powered off, lift the battery door latch and lift and remove the battery door. 3. Close the memory card slot cover. 1 4.
WARNING: Use only Sprint-approved or Motorola-approved batteries and chargers with your phone. The failure to use a Sprint-approved or Motorolaapproved battery and charger may increase the risk that your phone will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage. Important: For information on battery safety, see “Battery Use and Safety” on page 112.
2. Insert the battery into the opening, making sure the connectors align. Gently press down to secure the battery. Removing the Battery 1. Make sure the power is off so that you don’t lose any stored numbers or messages. 2. Remove the battery cover and lift the battery to remove it. 3. Replace the battery door, pressing down firmly on it to ensure it is secured properly. WARNING: Do not handle a damaged or leaking battery as you can be burned.
䊳 Plug the flat end of the charger into the phone’s micro USB connector and the other end into the wall socket connector. Plug the wall socket connector to an electrical outlet. 3H As your phone connects to the network, you see a connecting message. Your phone may require you to enter identifying information to use it or to access specific features. Note: If your phone's SIM PIN is set, you will be prompted to enter your SIM PIN code when you turn on your phone.
Home Screen The home screen gives you all your latest information in one place. It’s what you see when you turn on the phone or press Home X. Here’s the basic setup: The home screen extends beyond what you see on the initial screen to give you more room for adding shortcuts, widgets, and more. Press the Navigation key left or right to see more panels or to add widgets or shortcuts. 10:10 PM 10:10 PM 10:10 PM 9 9 12 12 9 9 Notifications Bar Press to check notifications.
Shortcuts To add shortcuts to the home screen, press Menu h > Manage Home > Add > Shortcuts and select a shortcut. Apps (Applications) Your phone comes with many apps (applications) already installed, and you can download and install more. To open an app, select its icon. Applications Tab All the apps on your phone, including the apps that came with your phone and any you download and install, are listed in alphabetical order in your Applications menu.
Battery Strength — A fuller battery indicates a greater charge. The “lightning” icon (bottom rows) indicates the phone is charging. Signal Strength — More bars next to the antenna indicate a stronger signal. No Service — Your phone is without service. You cannot make or receive any type of call. Phone In Use — Your phone is active on a phone call. Direct Connect In Use — Your phone is active on a Direct Connect call. Group In Use — Your phone is active on a Group Connect call.
Hearing Aid — Your phone is set for use with a hearing aid and is active on a phone call. See “Using Your Phone With a Hearing Aid Device” on page 115. Text Message — You have one or more text messages. See “Receiving Messages” on page 47. Email — You have one or more emails. Notification and Bluetooth LEDs You phone has a Notification Notification LED LED that blinks Bluetooth whenever you LED receive voicemail, email, have an appointment, or your battery is low.
Displaying Your Numbers Screen Timeout To change how long your phone waits before the > screen goes to sleep automatically, select Settings > Sound & display > BackLight timer. To put your phone to sleep and lock your keypad, see “Keypad Lock” on page 75. Adjust Volume Select Contacts and select the first contact. The first contact in the Contacts list will always contain your phone’s information.
The quickest and easiest way to enter text on your phone is by using the QWERTY keyboard. Rotate the phone counter-clockwise and slide the keyboard out to access it. The screen automatically rotates to landscape (widescreen) mode. General Tips To… Enter symbols chosen from a list Press Symbols d. Enter alternate characters in the corners of keys Press Alternate c. To… Enter several Press Alternate c twice. alternate characters until you press Alternate c again.
Dialpad Text Entry To… You can also enter text using the dialpad. To switch text entry modes when using the dialpad, press r and select from the following: Call log See your Lock your phone’s screen Option Press Talk `. To put your phone to sleep, press and hold Menu h. Press r to wake up your phone. Press Menu h > * to unlock the Alpha input To enter words one letter at a time. Word input To have your phone suggest word options. Set screen Numeric input To input numbers.
Your phone is like a small computer, giving you access to a lot of information and apps. Depending on what you use, that can take a lot of power. To conserve battery life between charges: 䢇 Reduce recording or watching videos, listening to music, or taking pictures. 䢇 Disable or remove widgets that stream information to your home screen, such as news or weather. (See “Home Screen” on page 16.
Accessories Your MOTOROLA i886 comes with the following accessories: 䢇 A Li-Ion battery and charger. 䢇 A128K SIM card. 䢇 A 2GB microSD card. Various accessories are available for use with your MOTOROLA i886, including cases, vehicle power chargers, data cables, hands-free accessories, and more. To order additional accessories, go to www.sprint.com or call1-866-866-7509. You can also stop by any Sprint Store. For information on Sprint Store locations, go to www.sprintstorelocator.com.
3.
more phones equipped with this capability (page 43). Phone Calls Making Calls Placing a traditional wireless phone call from your MOTOROLA i886 is as easy as making a call from any landline phone. 1. From the home screen, Enter a number, and then press Talk `. 2. Press End/Power " when you are finished. You can also make calls from your phone by selecting numbers directly from Contacts (page 28) or your Call log (page 30). Answering Calls 䊳 Press Talk ` to answer an incoming call.
Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone. 䊳 Enter 911 and press Talk ` to be connected to an emergency response center. If you are on an active call, you must end it before calling 911. If your phone is password locked (see “Security Lock” on page 75), select the Emergency call button at the bottom of the screen.
In-Call Options Press Menu h during a call 10:10 AM to display a list of available inMute call features. To select an Speaker option, select it. The following options may be available: Hold 䢇 Mute to mute your phone’s Add microphone. Select Mute Swap again to unmute your Incoming Call phone’s microphone. Merge Jane Doe 312-123-4567 䢇 Speaker to route the phone’s Bluetooth Press Menu for call options audio through the speaker or the earpiece. 䢇 Hold to place a call on hold. 䢇 Add to place a second call.
letters of a Contact’s name. You will see a list of matching entries. 3. To display an entry, select a name. Select a phone number to place a call. Phone Numbers With Pauses You can dial or save phone numbers with pauses for use with automated systems, such as voicemail, conference call, or credit card billing numbers. There are two types of pauses available on your phone: 䢇 Wait sends the next set of numbers when prompted. 䢇 Pause automatically sends the next set of numbers after three seconds.
Making a Call From the Call Log 1. Select > Call log. 䢇 䢇 Tip: From the home screen, press Talk ` to open the Call log. 2. Highlight a number and press Talk `. Making a Phone Call While in a Direct Connect Call 䊳 Press Menu h > Call contact while in an active Direct Connect call to initiate a phone call to the other person (if their mobile phone number is stored in Contacts).
Making Direct Connect Calls Note: The number of digits in each part of a Direct Connect Connect Numbers” on page 31. 2. Press and hold the Direct Connect (DC) button on the left side of your phone. Begin talking after your phone emits a chirping sound. Direct Connect (DC) Button 3. Release the DC button to listen. A Direct Connect call ends automatically after there is no activity on the call for several seconds. number may vary.
Making Direct Connect Calls From Contacts or the Call Log A Direct Connect call ends automatically after there is no activity on the call for several seconds. If you have numbers stored in Contacts (page 82) or the Call log (page 78), you can use these numbers to make calls. Direct Connect Timeout 1. Select > Call log. Contacts, or select > 2. Select an entry and then press and hold the DC button to call the entry’s Direct Connect number.
You can customize the DC button for quick access to Direct Connect functions. 䊳 Select > Settings > Call settings > Direct Connect settings > One Touch DC. Options Off Turn off One Touch DC. Launch DC Contact List Open a list of Direct Connect contacts on your phone. DC a selected contact Start a Direct Connect call with the selected contact. DC the most recent number Start a Direct Connect call with the most recent Direct Connect number in the Call log.
Answering Group Connect Calls 䊳 Proceed as if answering a Direct Connect call from one user. Only one person at a time may speak on a Group Connect call. Creating Groups in Contacts > Contacts > Menu h > New DC group. 1. Select 2. Select the icon to the left of the entry names to select the group members. 2. Press Menu h > Edit group. 3. Select Add Members and select members to add. 4. Select Save and then press Menu h > Done to save the contact.
To delete a Group from Contacts: 䢇 1. Select a Group to open it. 2. Press Menu h > Delete group. 䢇 The name or the Direct Connect number of the person speaking. The number of members who are participating in the Group Connect call. 3. Select OK. To store a group to Contacts from the Call log list: 1. From the Call log list, select a Group to open it, and then select View participant list. 2. Select Add to contacts. 3. Select Phone and then edit the Group information if desired.
To send a picture during a call: 1. While in a Direct Connect call, press Menu h > Share picture. A list of pictures that can be included in a Direct Connect call appears. Tip: When a person sends you My Info from his or her phone, you can then easily store this information to Contacts from the Call log list. To start a call by sending a picture: 2. Select a picture and press the DC button to send it. 1. Select 3. Wait while the picture is transmitted. The Direct 2.
1. When you see the message asking you to accept the picture, select Accept. (To decline the picture, select Reject.) 2. Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted. 3. When prompted, press the DC button to resume the Direct Connect call. Note: The first time you accept a stored picture after turning the phone on, the message Picture fees may apply appears and you are prompted to respond. Select OK to accept the picture.
2. A checkmark appears next to the fields that will be sent. To add or remove the checkmark, select it. 3. When you are finished, select Save. To control whether your information is sent automatically: 䊳 Select > Settings > Call settings > Direct Connect Settings > Sharing contact info > Share My Info. Note: When you receive your phone, it is set to send your information automatically. 2.
3. When prompted, press the DC button to send the information. Note: If the Contacts entry you scrolled to is a Group, you may be prompted to allow yourself to be a part of the group being sent. Select OK to become part of the group. To start a call by sending contact information: To view the information while still in the Direct Connect call: 䊳 Press Menu h > View Contact. You can also view My Info from other phones on the Call log list. See “7. Call Log” on page 78. Talkgroups 1.
Group Connect Talkgroup You will hear all active Talkgroup conversations on your > Settings > Call phone. To silence them, select Geography Nationwide Limited to local market and network (fleet) settings > Direct Connect settings > Talkgroups > Silence Talkgroups.
䊳 Answer it as you would a regular Direct Connect call. Only one person at a time may speak on a Talkgroup call. During and immediately after a Talkgroup call ends, press Menu h > Options to display any available options. Call Alerts Call Alerts let you notify others that you want to communicate with them using Direct Connect. When a user receives a Call Alert, the phone sounds a tone and displays your name or Direct Connect number. Sending Call Alerts 1.
Using the Call Alert Notification When you store a Call Alert, it remains in notifications until you clear the notification by opening it, or by going into the Call log. Viewing Call Alerts 䊳 Press Notifications a and scroll. Responding to Call Alerts in the Queue After you queue a Call Alert, you can respond to it by making a Direct Connect call to the sender or sending a Call Alert to the sender. To make a Direct Connect call to the sender: 1. Select the Call Alert notification or open the Call log.
After an failed incoming or outgoing Direct Connect call or Call Alert, you can send a message to the caller or intended recipient. To set up a message for incoming or outgoing calls: 1. Select > Settings > Call settings > Auto text reply > Incoming call or Outgoing call. 2. Select from Off, Ask me to send text, or Always send text. 3. Create a message to be sent, and select Update. To send a message after receiving or making a call: 1.
Direct Connect, Group Connect, Talkgroup calls, and Call Alerts; data services; messaging; call timers; and call forwarding. Setting Your Phone to Direct Talk Before you and another caller can use Direct Talk, both of your phones must be set to Direct Talk mode. 1. Select > Direct Talk. 2. Select Enter Direct Talk. After a few seconds, your channel and code appear on the display screen. Your phone displays the last channel and code used for Direct Talk. To return to network mode from Direct Talk: 1.
䊳 In Direct Talk mode, press and hold the DC button. Begin speaking after you hear the Direct Talk tone. Release the DC Button to listen for a response. The tone emitted from your phone when making a Direct Talk call sounds different from the tone heard on Direct Connect calls conducted on the network. If you receive an error message, this means: 䢇 There may be no parties on your channel or code. 䢇 You are out of range.
To make a private Direct Talk Call: 1. In Direct Talk mode, enter a ten-digit wireless phone number. (You can also select a number from Contacts or Recent Calls.) 2. Make the call in the same way you make a regular Direct Connect call. If you receive an error message, it means: You may not be using a valid wireless phone number. 䢇 The person that you are trying to reach may not be in Direct Talk mode. 䢇 The person that you are trying to reach is set to a different channel, or is out of range.
⽧ Receiving Messages (page 47) ⽧ Voicemail (page 48) ⽧ Messaging (page 49) ⽧ Caller ID Blocking (page 55) ⽧ Call Waiting (page 56) ⽧ Making a Second Call (page 56) ⽧ Making a Three-Way Call (page 57) ⽧ Call Forwarding (page 57) ⽧ Making International Calls (page 59) ⽧ Special Dialing Codes (page 59) ⽧ Sprint Phone Services (page 60) Receiving Messages When you receive a message, you have two ways to access the message: 䢇 Respond to the message notification that appears when the message
Voicemail Tip: To receive voicemail messages, you must first set up your voicemail box. If you are bringing your phone number from another carrier, we suggest you set up your voicemail box after the number you brought to Sprint is active on your Nextel phone and your temporary phone number is deactivated. If you set up your voicemail box prior to this, all messages and all settings (including your greeting and password) will be lost when the number you have brought to Sprint becomes active.
Messaging 12:24 PM Messaging New Message Messaging lets you send and receive messages that may include text, pictures, and audio recordings. Jimmy Dean Hey what time is ... Your messaging address is PTN@messaging.sprint.com. Your PTN is your ten-digit Nextel Personal Telephone Number. Last nights dinner ... Select > Messaging. 2:27pm Bradon Stiles Where are you? 4:27pm Emily Crawford Message List Select to open a message. Highlight, & press & hold OK to view more options.
䢇 䢇 䢇 Message — the body of the message. This may include text, pictures, ringtones, or voice records. Subject — the subject line. To add a subject, press Menu h > Add subject and enter a subject. Attach — one or more attachments. These may be pictures, ringtones, or audio files, including voice records that you create while creating the message. To add an attachment, press Menu h > Attach. To send a message, you must address it to at least one recipient.
1. To create the subject line, press Menu h > Add subject. 2. To attach a picture, audio, voice recording, or video, press Menu h > Attach and then select an option to attach a file. 3. To send the message, press r. Replying to a Message You can reply to a message while you are viewing it. 2. Select Text mobile. 3. Create and send the message. To begin a message from the Call log list: 1. From the Call log list, select an entry. 2. Select Send text message. 3. Create and send the message.
Accessing Saved Drafts 1. Select > Messaging. 2. Draft messages have “Draft” in red letters next to them on the right. 3. Select the message to open it and finish composing your message. Attachments Messages may contain pictures or audio files as attachments. If a message contains a picture or audio file as an attachment, select the attachment to view the picture or play the audio file.
1. Select a message thread to open it. 2. Highlight a message, press and hold r, and then select Forward. 3. Address, edit, and send your message. Embedded objects and attachments are included when you forward a message. Calling a Number in a Message If any field in a message contains a phone number, Direct Connect number, or Talkgroup ID, you can call or send a Call Alert to that number. To make a call to a number in a message: 1. Highlight the message and press r. 2.
3. Select Create new contact to store the number in a new entry, or select an entry to store the information to an existing entry. 4. To change the contacts type (Mobile, Home, Work, etc.), press r to select the number, select Edit label, and select a type. 5. Press Menu h > Done when you have finished entering the information. Message Groups A Message Group allows you to send messages to groups of up to 20 contacts. Create Message Groups > Contacts > Menu h > New Message Group. 1. Select 2.
䊳 Select > Contacts, highlight the message group, press and hold r, and then select Edit group > Add members. Select the contact(s) you want to add, select Save, and then select Done. To remove members: 䊳 Select > Contacts, highlight the message group, press and hold r, and then select Edit group. Highlight the member to remove and press r. When prompted to delete the member, select OK. Select Done when you are finished.
Call Waiting Making a Second Call 1. Place or receive a phone call. Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. 2. While the call is active, press Menu h > Add. If you are on a call and receive a second call, your phone emits a tone and displays a message. 3.
Making a Three-Way Call Call Forwarding With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. Call Forwarding lets you forward all your incoming calls to another phone number – even when your phone is turned off. You can continue to make calls from your phone when Call Forwarding is activated. Lock h > Add. (The first call is placed on hold.) 2. Enter a second phone number and press Talk `. 3.
If you specified a forwarding number for this type of call before, this number displays. To forward all calls to this number select Enable. 䡲 If no number is specified, enter a phone number and select Enable. 䡲 – or – Select the Contacts icon to the right of the number field and select a number from Contacts. 3. Select Enable and press Home X to return to the home screen. All your calls are now forwarded to the number you specified. Turning Off Call Forwarding 1.
number for calls received when your phone is busy. 3. If you specified a forwarding number for this type of call before, this number displays. 䡲 To forward calls to this number, select Enable. 䡲 To delete this number, select the text field, and then press and hold the Navigation key left. 4. To enter a forwarding number: 䡲 Enter the number or select the Contacts icon to the right to select a number from Contacts. When the number is entered, select Enable. 5.
Note: Using 711 to reach Telecommunications Relay Service may not be available in all areas. To enable TTY mode: 1. Select > Settings > Call settings > TTY. 2. Select HCO, TTY, or VCO and then select OK. 䡲 TTY – Type and read text on your TTY device. VCO (Voice Carry-Over) – Speak into the phone and read text replies on your TTY. 䡲 HCO (Hearing Carry-Over) – Type text on your TTY and listen to voice replies on your phone.
When incoming calls are made to a non-active line, they will be sent to voicemail without ringing. (See “Call Forwarding” on page 57.) Sprint 411 Service Features Dial 411 from your wireless phone to receive nationwide listings, movie listings and showtimes, restaurant reservations, and driving directions, as well as sports scores, stock quotes, and weather conditions. Spanish speaking operators available.
To launch the browser: 5. Web and Data Services 䊳 Select Opera Mini. > Note: The first time you access the browser, you will be ⽧ Web Browser (page 62) ⽧ Email (page 65) ⽧ Microsoft™ Office Outlook™ Synchronization (page 66) prompted to accept the Opera software end user agreement. Scroll to the bottom of the page to read the agreement and then press Menu h > Accept.
Browser Options Your phone uses the data capabilities of the Nextel National Network (over the air) to automatically connect to the Web. Press Menu h and then press the Navigation key down to see browser options: Tip: Contact Sprint for information on data usage fees and Options Bookmarks Add, delete and manage bookmarks. Select Web Links Feeds View and manage RSS feeds. When you select a link, your phone outlines it and goes to that page.
Going to a Specific Website To go to a website by entering a Web address (URL): 1. Select the text entry field at the top of the page. 2. Enter a Web address and then press r. Note: Not all websites are viewable on your phone. Creating a Bookmark Bookmarks allow you to store the address of your favorite websites for easy access at a later time. 1. Go to a Web page and press Menu h > Bookmarks. 2. Select Add (website name). 3.
Power Scroll To zoom in to an area of the Web page you are viewing, use the Navigation key to move the magnifier box over it and press r. To zoom out, press Back %. You can use your dialpad to move quickly through a Web page.
The email setup wizard will guide you through setting up your email account. Tip: Press c and the Navigation key up to jump to the first email in the inbox. Press c and the Navigation key down to go to the last message. Create a New Email 1. Select > Email > Menu h > Compose. 2. Enter the recipient email address and message, and then select Send. Tip: Press Menu h for options, such as Attach or Add Cc/ Bcc.
Note: Turn off Background Data and Auto-sync to extend Web and Data battery life. (See “Battery Tips” on page 23.) You cannot receive phone calls while your phone is syncing. Shorter synch frequencies may prevent you from receiving phone calls. For optimum performance, set your phone to sync every 30 minutes. Exchange Calendar 䊳 Select > Calendar. Exchange calendar appointments are shown in the same calendar as your phone calendar appointments, but each will be shown in a different color.
Sound Settings 6. Settings Ringtones Your phone provides a variety of ringer options that allow you to customize your ring and volume settings. These options allow you to identify incoming calls and messages by the ring.
Vibrate Settings Direct Connect calls, Group Connect calls, and Talkgroup calls are heard through the earpiece, not the speaker. Vibrate All The ring volume is set to zero for all calls. The Vibrate All option allows you to be notified of calls and messages with a vibration instead of an audible alert. 䊳 Press and hold the Volume button down while on the home screen until the phone vibrates.
Adjusting the Phone’s Volume Settings Changing the Wallpaper Adjust your phone’s volume settings to suit your needs and your environment. Choose what you see on the display screen while powering on or off and while on the home screen. 1. Select > Settings > Sound & display. 2. Select Ringer volume or Media volume. 3. Choose a volume level and select OK.
Select a format for the time and date display. 䊳 Select > Settings > Date & time. 䡲 Select Use 24-hour format to toggle between 24-hour time display and 12-hour time display. 䡲 Select date format, and then select a date format to assign it. also choose to be notified with a sound while making a phone call.
To receive delivery reports: 䊳 > Messaging > Menu h > Settings > Delivery reports. Select Note: When Airplane Mode is on, your phone’s Bluetooth capability is disabled, and all active Bluetooth connections are dropped. Airplane Mode Call Settings Sometimes you may want to have your phone on, but turn off its ability to make and receive calls and other transmissions.
Direct Connect Settings Setting One Touch DC The Direct Connect settings menu controls how your phone handles Direct Connect calls, Group Connect calls, and Talkgroup calls. One Touch DC sets your phone to call the most recent Direct Connect number or Group on the Call log list, or a Direct Connect number you choose, every time you press the DC button. You can also set your phone to bring up a Direct connect Contacts list when the DC button is pressed.
Security Settings 䊳 Select > power up the phone. You can change or disable the SIM PIN. Settings > Location & security. 1. Select > Settings > Location & security > Set up SIM card lock > Lock SIM card. 1:22 12:24PM PM Location i & security i settings i Security lock Set up security lock Select to set up security lock. Keypad lock Keypad lock help Set the time period for the keypad auto-lock Select to set up keypad lock timeout.
Note: SIM PIN must be turned on in order to access this feature. 1. Select > Settings > Location & security > Set up SIM card lock > Change SIM PIN. Your Phone’s Lock Feature Keypad Lock To lock the screen: 䊳 Press and hold Menu h. 2. Enter the current SIM PIN and select OK. – or – 3. Enter the new SIM PIN and select OK. Let the screen time out (don’t press or select anything). 4. Reenter the new SIM PIN to confirm and then select OK.
䡲 To change the password, select Change unlock password. (To select this option, security lock must be set.) Unlocking Your Phone 䊳 At the “Enter password to unlock” prompt, enter your password and select Enter. Calling in Lock Mode You can place calls to 911 when in lock mode. 䊳 Select the Emergency call button at the bottom of the screen, dial 911, and press Talk `.
Feature Reset Selecting Feature Reset resets all phone settings back to their default settings. 1. Select > Settings > SD card & phone storage > Feature Reset > Feature Reset. 2. Enter your phone’s six-digit security code and Settings select OK. (A disclaimer is displayed.) Note: Your security code is a six-digit number used for resetting your phone. Please contact Sprint Customer Service if you do not know your security code. 3. Read the prompt and select Re-apply All to complete the reset.
Note: The Call log list records only calls that occur while the 7. Call Log ⽧ About the Call Log (page 78) ⽧ Viewing the Call Log (page 80) ⽧ Saving Items From the Call Log (page 80) ⽧ Deleting Items From the Call Log (page 81) ⽧ Prepending a Number From the Call Log (page 81) About the Call Log The Call log list displays the numbers (or Contacts entries) for phone calls and Direct Connect calls you placed, accepted, or missed, and for Call Alerts you have received.
For phone calls, an icon appears giving information about the call. If you receive My Info from the same phone more than once, only the most recently sent version appears in the Call log list. A call you made. A missed call. Missed calls appear on the Call log list only if you have Caller ID. When you select a call to view its details, you see information such as the name associated with the call, the number, date, time, and duration of the call.
When you select contact information to view its details, you see the name or Direct Connect number of the person who sent the information and all the information in the item. If you receive contact information with the same name from the same phone more than once, only the most recently sent version appears in the Call log list. Viewing the Call Log 䊳 Select > Call log. Tip: When you’re in the home screen, you can press Talk ` Saving Items From the Call Log 1.
Deleting Items From the Call Log To delete an item from the Call log list: 1. From the Call log, select an entry to open it. 2. Press Menu h > Delete from call log. To delete all items on the Call log list: 䊳 Select > Clear Call log. Call log > Menu h > Call Log Prepending a Number From the Call Log If you need to make a call from the Call log list and you are outside your local area code, you can add the appropriate prefix by prepending the number. 1.
About Contacts 8. Contacts ⽧ About Contacts (page 82) ⽧ Creating Contacts Entries (page 83) ⽧ Viewing Contacts (page 85) ⽧ Adding a Number to an Entry (page 86) ⽧ Editing Entries (page 86) ⽧ Deleting Entries (page 86) ⽧ Selecting a Ringtone for an Entry (page 87) ⽧ Assigning a Picture to an Entry (page 87) ⽧ Import and Export Contacts (page 87) 82 8. Contacts Each Contacts entry can store several numbers, email addresses, chat addresses, or street addresses.
Creating Contacts Entries Each number or address stored must be assigned a Contacts type: Contacts Type Phone numbers Entry Types Home, Mobile, Work, Work Fax, Home Fax, Pager, Other, Custom, Callback, Car, Company Main, ISDN, Main, Other Fax, Radio, Telex, TTY TDD, Work Mobile, Work Pager, Assistant, MMS Direct Connect DC1, DC2, Custom Email Home, Work, Other, Mobile, Custom IM AIM, Windows Live, Yahoo, Skype, QQ, Google Talk, ICQ, Jabber, Custom Postal addresses Home, Work, Other, Custom Organi
2. To assign a name to the entry, select the name 4. To add more numbers or addresses to the entry, select Add phone, Add Push To Talk, Add email, etc. field and enter a name. 5. To assign a picture to the name (optional): 1:22 PM Edit contact 䡲 Select photo Jane 6. Press Menu h > Done or scroll to the bottom of Add name fields Phone number Mobile Select to add another entry. PTT Highlight text field and press OK to Edit label or Delete number.
2. Select the contact name to display the entry, and – or – From the QWERTY keyboard enter , (comma) for a pause or ; (semicolon) for a wait. Note: You can have multiple pauses in a phone number and combine waits and pauses. Filtering Contacts Entries You can set Contacts to display only entries with certain attributes. Viewing Contacts 1. Select then scroll up or down to view all information stored for the entry. > Contacts > Menu h > Display options. 1.
Adding a Number to an Entry 1. Select > Contacts and select an entry. Deleting Entries 1. Select > Contacts and select an entry. 2. Press Menu h > Edit contact. 2. Press Menu h > Delete contact. 3. Select Add phone and enter a phone number or 3. Select OK to confirm. Add Push To Talk and enter a DC number. 4. To assign a number type, select the number, select Edit label, and select a type. 5. Press Menu h > Done to save the new number. Editing Entries 1. Select > Contacts and select an entry.
Selecting a Ringtone for an Entry Import and Export Contacts Assign a ringtone to a contacts entry so you can identify the caller by the ringtone. (See “Ringtones” on page 68.) Your phone stores its contact entries in its internal memory and not within your SIM card. If you are using a SIM card from a previous phone, the first time you use your phone, you will need to import the contacts from your SIM card to your phone to be able to use the contacts stored on the SIM card. 1.
Import Contacts From Your SIM Card 䊳 Select > Contacts > Menu h > SIM Manager > Import contacts from SIM. Note: You might have already done this using the Setup menu (see page 2). Export Contacts to Your SIM Card 䊳 88 Select > Contacts > Menu h > SIM Manager > Export contacts to SIM. 8.
9. Tools ⽧ Calendar (page 89) ⽧ Alarm clock (page 90) ⽧ Calculator (page 90) Add Calendar Events 䊳 Calendar 䊳 Select > Calendar 12:24 PM January, 2009 Sun Mon Tue Wed 28 29 30 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 From any calendar view, press Menu h > New event. Enter event details and then scroll to the bottom of the entry and select Done.
Alarm clock 䊳 Select > Alarm Clock. To turn on an alarm, select the check box. 䡲 When an alarm sounds, select Dismiss to turn it off or Snooze to delay. 䡲 To add an alarm, press Menu h > Add alarm, and then enter alarm details. 䡲 To enable or disable an alarm, select the check box. 䡲 12:24 PM Alarm Clock PM 7:00 AM Everyday PM 8:30 AM Mon, Tue, Wed, Thu, Fri PM 9:00 AM Calculator 䊳 Select > Calculator. Your calculator has basic and advanced views.
Inserting the microSD Card 10. microSD Card 1. Remove the battery cover. (See “Installing the Battery” on page 13.) 2. Open the memory card slot cover, and slide in the Using a microSD Card With Your Phone (page 91) ⽧ microSD Settings (page 93) ⽧ USB and Memory Card (page 94) microSD Card memory card until it clicks into place.
Removing the microSD Card Do not remove the memory card until you select the Unmount SD card option under SD card & phone storage. Removing the memory card before selecting the Unmount SD card option could result in loss of data. 1. Before you remove your memory card you need to unmount it. Select > Settings > SD card & phone storage > Unmount SD card. Note: The microSD card and its adapter can be easily damaged by improper operation. Please be careful when inserting, removing, or handling them. 4.
Tip: If your computer has an SD card slot or if you have an SD card adapter, you can use the microSD card and adapter to transfer files such as audio files, pictures, and videos directly between your computer and your microSD card. The supplied microSD adapter allows microSD cards to be used in SD-compatible devices such as digital cameras, printers, and computers. Before using, you will need to insert the microSD card into the microSD adapter.
USB and Memory Card 2. Your phone shows USB Drag and Drop 3. Select Mount (if asked) to connect your memory You can transfer your pictures, videos, music, ringtones, and more, from your computer to your phone’s memory card. 1. With a memory card inserted, and your phone showing the home screen, connect a Motorola micro USB data cable from your phone’s micro USB port to a USB port on your computer. Your phone should show in the notifications bar.
Settings 11. Camera ⽧ Taking Pictures (page 95) ⽧ Videos (page 98) 245 Picture Counter Zoom Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button. To take a picture: 1. Press and hold Camera j on the right side of the phone to launch the camera. Zoom Change Settings Camera Taking Pictures Press the Navigation key up or down to scroll through the settings, such as Zoom, Effect, and Scenes.
After taking a picture press Menu h for the following options: In the viewfinder, press Menu h > Settings to open the camera menu: Options Take a new picture Returns you to the viewfinder. Share Share your picture via Bluetooth, DC, Email, or Messaging. Set as Set the picture as your Wallpaper or Contact icon. Delete Delete the picture. Tip: Photos are stored on your microSD memory card. Picture Resolution is 5MP, unless you change it. 96 Photo Options 11.
View Your Photos Select > Media Gallery > All Pictures. 12:24 PM Gallery All pictures Play a Slideshow 䊳 Select > Media Gallery > All Pictures > Menu h > Play Slideshow to start a slideshow. To stop the slideshow, press r. To return to the gallery, press Back %. 1. Select 87 items 䡲 My captures 䡲 1 item 3 items To delete the photo, select Delete. To set the photo as a contact picture or wallpaper, select Set as. Tip: To copy photos to/from a computer, see “USB Drag and Drop” on page 94.
Videos Change Settings Record and Share Videos Press the Navigation key up or down to scroll through the settings, such as Zoom, Effect, and Scenes. Press the Navigation key left or right to scroll through the settings options. 1. Press Camera j > Menu h > Camcorder. 2. To record the video, press Camera j. To stop the video recording, press Camera j again. 1.
䊳 12. Bluetooth® Wireless Select > Settings > Wireless & networks > Bluetooth settings. 1:22 12:24PM PM Bluetooth settings Bluetooth ⽧ Turning Bluetooth Power On and Off (page 99) ⽧ Connecting and Disconnecting Bluetooth Devices (page 100) Select to turn Bluetooth on or off.
Bluetooth Status Indicators 1. Make sure the device you are pairing with is in The Bluetooth status indicators on your phone’s display screen shows your Bluetooth connection status at a glance: Tip: Refer to the guide that came with the device for details. None – Bluetooth is disabled (default status). 2. Select – Status indicator will be light blue when Bluetooth is turned on, but no device is connected. 3. Select Bluetooth to turn on and scan.
Reconnect Devices To automatically reconnect your phone with a paired device, simply turn on the device. To manually reconnect your phone with a paired device, select the device name in the Bluetooth devices list. Disconnect Devices To automatically disconnect your phone from a paired device, simply turn off the device. To manually disconnect your phone from a paired device, select the device name in the devices list, and then select OK.
Music Basics 13. Music ⽧ Music Basics (page 102) ⽧ Set Up Music (page 103) ⽧ Get Music (page 103) ⽧ Play Music (page 104) 䊳 Select > Music, select a category, and then select a song to begin playing it. 12:24 PM 12:24 PM Music Unknown Song Unknown Artist, Unknown album Artists Albums Songs Playlists 01:00 Categories Select to list songs or playlists. -00:10 Progress Bar Music Controls Tip: When a song is playing, you can add it to a playlist by pressing / > Add to playlist. 102 13.
What Music Transfer Tools Do I Need? To put music on your computer and then load it on your phone, you need: ® ® 䢇 A Microsoft Windows PC. 䢇 A USB data cable (included). What Headphones Can I Use? Your phone has a 3.5mm headset jack for wired stereo listening. You can go wireless with Bluetooth® stereo headphones or speakers (see “12. Bluetooth® Wireless” on page 99). Get Music You Need a Memory Card Transfer Music Using USB Your music is stored on your memory card.
2. Your phone shows Play Music 3. Select Mount (if asked) to connect your memory Music Library in the notifications bar. You can’t use the files on your memory card while it is connected. card. 4. Find “Removable Device” (your memory card) in the “My Computer” window. Open your music library, then select what you want to play. 䊳 Select > Music. 5. Drag and drop your music to a folder on your memory card.
Music Player Controls Just select a song or playlist to get going. Play/Pause Press r. Previous/Next Press the Navigation key left (previous) or right (next). Fast Forward/Rewind Press and hold the Navigation key right (fast forward) or left (rewind). View Playlists Press h > Library and Playlists. select Shuffle Press Menu h > Shuffle. Repeat Press Menu h > Repeat. Volume Press the side Volume buttons. View Library Press h > Library.
Playlists Music Player Controls Use as Ringtone Press Menu h > Use as ringtone. Delete Press Menu h > Delete. To add a song from the music library to a playlist, highlight the song, press and hold r, and then select Add to playlist. Choose an existing playlist, or select New to create a new playlist. Hide, Wake, Turn Off To add a song to the playlist you are playing, press Menu h > Add to playlist in the music player. Press Home X to use another app. Your music continues to play.
Safety and Warranty Information
S1.
Do Not Rely on Your Phone for Emergency Calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.g., medical emergencies). Emergency calls may not be possible on all cellular networks or when certain network services or mobile phone features are in use. Check with your local service provider for details.
Operational Precautions Note: Always turn off the phone in healthcare facilities, and request permission before using the phone near medical equipment. To assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions: Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.
Turning Off Your Phone in Dangerous Areas 䢇 To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives. 䢇 Turn your phone off when you’re in any area that has a potentially explosive atmosphere. Although it’s rare, your phone and accessories could generate sparks.
awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired. Caution About High Volume Usage WARNING: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the volume sound level, the less time is required before your hearing could be affected.
Don’t place your battery near a heat source. Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore: 䡲 Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. 䡲 Avoid leaving your phone in your car in high temperatures. DOs 䢇 䢇 Do avoid dropping the battery or phone. Dropping these items, especially on a hard surface, can potentially cause damage.
Disposal of Lithium Ion (LiIon) Batteries: Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries. 䢇 Do not handle a damaged or leaking Li-Ion battery as you can be burned. 䢇 WARNING: Never dispose of batteries in a fire because they may explode. 䢇 Special Note: Be sure to dispose of your battery properly.
Your battery, charger, or portable radio may contain symbols, defined as follows: Symbol 032374o 032376o 032375o Definition Important safety information follows. Do not dispose of your battery or phone in a fire. Your battery or phone may require recycling in accordance with local laws. Contact your local regulatory authorities for more information. Do not throw your battery or phone in the trash. Li Ion BATT 032378o Your phone contains an internal lithium ion battery.
out the phone with your hearing device is the best way to evaluate it for your personal needs. 䢇 M-Ratings: Phones rated M3 or M4 meet FCC requirements 䢇 for hearing aid compatibility and are likely to generate less interference to hearing devices than unrated phones. (M4 is the better/higher of the two ratings.) 䢇 T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch”or “Telephone Switch”) than unrated phones.
BackLight timer. 2. Select the minimum time interval (15 seconds). 䢇 䢇 Position the phone so the internal antenna is farthest from your hearing aid. Move the phone around to find the point with least interference. Caring for the Environment by Recycling This symbol on a Motorola product means the product should not be disposed of with household waste.
Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. There is no special handling required by consumers. Product Operation Radio Frequency (RF) Energy If you wear the mobile device on your body, always place the mobile device in a Motorola-supplied or approved clip, holder, holster, case, or body harness.
If your mobile device offers an airplane mode or similar feature, consult airline staff about using it in flight. Implantable Medical Devices If you have an implantable medical device, such as a pacemaker or defibrillator, consult your physician before using this mobile device. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
human exposure to RF signals. More than 120 scientists, engineers and physicians from universities, government health agencies and industries developed this updated standard after reviewing the available body of research. In 1993, the Federal Communications Commission (FCC) adopted this updated standard in a regulation.
Your MOTOROLA i886 wireless phone meets the governmental requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured to not exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Owner’s Record Software Copyright Notice The model number, regulatory number, and serial number are located on a nameplate inside the battery compartment. Record the serial number in the space provided below. This will be helpful if you need to contact us about your phone in the future. The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media.
For instructions on how to obtain a copy of any source code being made publicly available by Motorola related to software used in this Motorola mobile device you may send your request in writing to: Motorola Mobility, Inc. OSS Management 600 North US Hwy 45 Libertyville, IL 60048 USA The Motorola website opensource.motorola.com also contains information regarding Motorola’s use of open source. Motorola has created the opensource.motorola.
service provider, applications providers, Motorola, and other third parties providing services. Privacy and Data Security Emergency Calls Motorola understands that privacy and data security are important to everyone. Because some features of your phone may affect your privacy or data security, please follow these recommendations to enhance protection of your information: 䢇 Monitor access: Keep your phone with you and do not leave it where others may have unmonitored access.
䢇 Smart Practices While Driving 䢇 Drive Safe, Call Smart SM Check the laws and regulations on the use of mobile devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. Contact www.motorola.com/callsmart for more information. Your mobile device lets you communicate by voice and data— almost anywhere, anytime, wherever wireless service is available and safe conditions allow.
䢇 䢇 Use your phone to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.* Call roadside assistance or a special non-emergency wireless assistance number when necessary.
S2. Manufacturer’s Warranty Motorola Limited Warranty for the United States and Canada ⽧ Motorola Limited Warranty for the United States and Canada (page 127) ⽧ Service and Repairs (page 131) Your phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section. For information regarding the terms and conditions of service for your phone, please visit www.sprint.
Products and Accessories Products Covered 128 Length of Coverage Products and Accessories as defined above, unless otherwise provided for below. One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap™ covers and cases. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Monaural Headsets.
Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products.
What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
Index Bluetooth 99–101 Bluetooth Device Name 101 Bookmarks 63 Accessing 64 Creating 64 A Accessories 24 Charger 24 Li-Ion Battery 24 Activation 2 Airplane Mode 72 Alarm Clock 90 Answering Calls 26 Applications 17 Attachments 52 See also Messaging B Backlight 70 Battery 13–15 Charging 14 Disposal 114 Installing 13 Safety 112 Battery Life, Extend 99 132 Index C Cables 94, 103 Call Alerts Answer 41 Deleting 42 Queue 42 Responding 42 Sending 41 Viewing 42 Call Forwarding 57 All Calls 57 Missed Calls 58 Off
D DC Options 73 Dialing Codes Non-Emergency Numbers 59 Telecommunications Relay Service 59 Direct Connect One Touch, Setting 73 Direct Connect Calls Dialing 31 From Contacts 32 Member ID 31 Direct Connect Numbers 31 Direct Send 35–39 Contacts 38 My Info 37 Pictures 35 Creating Groups 34 Deleting 34 Groups vs.
Calls From 53 Deleting 52 Embedded Objects 52 Forwarding 53 Going to Website 54 Message Groups 54 Notifications 47 Receiving 52 Sending 49 Text Messages 49 Messaging Settings Notification 71 microSD Card 91–94 Adapter 93 Inserting 91 Memory 93 Removing 92 Multimedia Messages See Messaging Music Set Up 103 My Info Receiving 39, 79 Sending 37 134 Index N Navigating Through Menus 19 Nextel Direct Talk See Direct Talk Non-Emergency Numbers 59 Messaging Settings 71–72 Sound Settings 68–70 Prepend Dialing 72 R
TTY Devices 59 Turning Your Phone On and Off 15 U Unlocking Your Phone 76 USB Cables 94, 103 V Vibrate All 69 Video 98 Recording 98 Voicemail 48 Playing Messages 48 Setting Up 3, 48 T Talkgroups 39 Join 40 TDD/TTY Devices 59 Telecommunications Relay Service 59 Text Entry 21 Text Messaging See Messaging Three-Way Calling 57 Transmitters Turning On and Off 72 Web Browser 62 Widgets 16 W Waits Storing 84 Wallpaper 70 Warranty 127–131 Web 62–65 Bookmarks 64 Go to Websites 64 Reloading a Web Page 64 Index S
