User`s guide

14
nextel.com
To accept your phone programming:
Subscriber Identity Module (SIM) Card
Your phone comes with a built-in level of security protection through the use of
the SIM card. The SIM card stores all your Phonebook information and your
Nextel account identification information. Since this information is stored on
the SIM card and not in your phone itself, you can remove the information by
removing the SIM card.
The SIM card is located in the SIM card holder on the back of the phone,
underneath the battery. You can verify that the SIM card is in place by removing
the battery and viewing the SIM card in the SIM card cover.
See “Removing/Inserting the SIM Card” on page 25 for information on locating
the SIM card. If there is no SIM card in your phone, notify your Nextel
Authorized Representative.
NOTE: Except for making emergency calls, your phone will not
function without the SIM card.
SIM Card Personal Identification Number (PIN)
To prevent unauthorized use of your account, you can protect your SIM card by
enabling the SIM PIN security feature. With the SIM PIN enabled, you must
enter your PIN each time the phone is powered on. You can change or disable
your PIN if desired.
1 You will receive a Net Alert with the message New Browser Message –
Receive Programming Info.
2 Press A under GOTO.
3 You are prompted to accept changes to your Phonebook. Press A
under OK.
4 A confirmation screen displays. Press A under OK.
5 You are prompted again to accept changes to your Phonebook. Press
A under OK.
6 A confirmation screen displays. Press A under OK.
7 Press e to return to the idle screen.