Laptop User Manual

Block Diagram
http://www.motorola.com/computer/literature 6-23
6
TMCPN710 Transition Module
The TMCPN710 transition module is used in conjunction with all models
of the MCPN750A base board. The transition module provides additional
I/O capabilities for the board.
The features of the TMCPN710 include:
❏ Two EIA-232-D asynchronous serial ports (identified as COM1 and
COM2 on the front panel)
❏ Two USB Series A connectors for USB interface
❏ One 10BaseT/100BaseTx connector for ethernet connections
(optional)
❏ Two 50-pin on-board connectors for EIDE interface to one or two
Compact FLASH plug-in modules
❏ Two 68-pin .08 Series Subminiature D connectors for PMC I/O
For additional information about the serial interface modules, refer to the
TMCPN710 Transition Module Installation and Use manual (listed in the
Related Documentation appendix).
TM-PIMC-0001
The TM-PIMC-0001 transition module is used in conjunction with all
models of the MCPN750A base board. The transition module provides
additional I/O for the MCPN750A series of SBCs. This transition module
also functions as a PMC Interface Module (PIM) carrier, supporting the
flexible PIM scheme for PMC rear I/O. Two PIM sites are provided that
interface with each of the PMC sites on the MCPN750A.
The features of the TM-PIMC-0001 include:
❏ Two RJ-45 connectors for asynchronous serial ports (identified as
COM1 and COM2 on the front panel)
❏ Two 10-pin headers (identified as COM3 and COM4)
❏ One RJ-45 connector for 10BaseT/100BaseTx ethernet connection