User`s guide

Modem Setup

The im240 Wireless Modem Installation and Application Software lets

your im240 Wireless Modem transmit data from your laptop or Pocket

PC. This software lets you control the wireless modem’s functions.

When to Insert the Modem

Important: DO NOT INSERT THE WIRELESS MODEM PRIOR TO

INSTALLING THE WIRELESS MODEM DRIVER AND

DASHBOARD SOFTWARE.

System Requirements

To install the im240 Wireless Modem Installation and Application

Software onto your laptop, you need the following:

• An im240 Wireless Modem

• The im240 Wireless Modem Installation and Application Software

CD-ROM (provided in your package)

• An IBM-compatible PC with:

• CD-ROM or DVD drive

• Available PCMCIA Type II slot

• One of these operating systems installed:

Windows 2000, Windows ME, Windows NT, or Windows XP.

Important: You must have administrative rights to install onWindows NT,

Windows 2000 or Windows XP.

• 25 MB free hard-disk space

• Recommended: Mouse or compatible pointing device

• For use with a Pocket PC:

Note: If your Pocket PC does not have a PCMCIA Type II slot, you

will need an adapter to use the wireless modem.

• One of these operating systems installed on your Pocket PC:

Pocket PC 2002, or Pocket PC 2003

• Microsoft ActiveSync 3.1 or higher

• Minimum 3 MB of addressable RAM

• A packet data account with an iDEN service provider