IMPRES TM Smart Energy System
Motorola’s state-of-the-art IMPRESTM technology allows communication between the battery and the charger. The result – a radio system that’s charged and ready to go whenever you need it.
Unique Battery Charging and Reconditioning Solution Automated battery maintenance Now manual tracking and recording of battery use are a thing of the past. IMPRESTM uses a unique communications protocol to facilitate adaptive reconditioning – the charger evaluates the details of the battery’s usage pattern to determine the optimal reconditioning interval. This automated process works to diminish memory effect and optimize the cycle life of the battery and maximize talk time.
TM IMPRES Smart Energy Systems – ready when you are. Make sure your radios are ready for action when you are – an IMPRES battery may be left in an IMPRES charger for extended periods without heat damage due to the charger. This makes IMPRES ideal for applications that require equipment in a “ready” state at all times.
Facts: TM 1. IMPRES products are smarter because they “talk” to each other. Motorola’s industry-exclusive IMPRES technology allows communication between the charger and the battery, which enables automated battery reconditioning, display of critical charging information and other key benefits. IMPRES batteries have a memory chip that stores all usage information, which can then be accessed and evaluated by any IMPRES charger.
Quick Reference Guide IMPRESTM Battery and Charger Guide by Radio Series For ASTRO® Digital XTS 3000TM, XTS 3500TM and XTS 5000TM Display shows battery capacity, voltage, charge status and more in real time.
Quick Reference Guide (continued) IMPRESTM Battery and Charger Guide by Radio Series WPLN4219A – With Display Modules (shown) WPLN4212A – Without Display Modules For MOTOTRBOTM BATTERY PART NUMBER CHEMISTRY CAPACITY† SPECIAL FEATURES PMNN4066A Li-ion 1500mAh Ruggedized PMNN4069A Li-ion 1400mAh Intrinsically Safe*, Ruggedized The batteries listed above are designed for use with the following chargers: WPLN4232A – IMPRES Single Unit Charger WPLN4212A – IMPRES Multi-Unit Charger WPLN4219A – IMPR
Specifications IMPRESTM Smart Energy System IMPRES Single Unit Chargers MODEL NUMBER: WPLN4111AR WPLN4232A WPLN4182A 3.23" x 3.82" x 7.88" 2.2" x 3.8" x 5.8" 2.2" x 3.8" x 5.8" 90-265 VAC 100-132 VAC 100-132 VAC 50-60 Hz 50-60 Hz 50-60 Hz Charging Method: (all chargers) CCDT / Negative Pulse (NiCd/NiMH) and CCCV (Li-ion) Charging Current: (maximum) 1.5 A 1.25 A 1.
