Operation Manual

38
Do Not Disturb
8. Do Not Disturb
Your IT.6 can be set to Do Not Disturb (DND) mode for a designated time period. Once
activated when you receive an incoming call the phone will not ring, unless a contact has
been set as an exception, see page 33 or the
Allow setting has been set to On .
8.1 Set DND mode
1. Press Menu , scroll to Do Not Disturb and press OK .
2.
On/O is highlighted, press OK .
3. Scroll to
On or O and press OK .
4. Scroll to
Start/End Time and press OK .
5. Using the keypad enter the
Start and End times and press OK .
6. Press
to return to standby.
8.2 Turn Allow mode on / o
1. Press Menu , scroll to Do Not Disturb and press OK .
2. Scroll to
Allow and press OK .
3.
On/O is highlighted and press OK .
4. Scroll to
On or O and press OK .
5. Press
to return to standby.
8.3 Set ring delay
1. Press Menu , scroll to Do Not Disturb and press OK .
2. Scroll to
Allow and press OK .
3. Scroll to
Ring Delay and press OK .
4. Scroll to the ring delay you want (either
No Rings or 10 - 20 Rings ) and press OK .
NOTE
Once
Allow is set to On and the ring delay is set, the IT.6 will ring only when the set ring
delay is reached.
If you page your handset or the alarm has been set the phone will still alert you even when
DND mode is activated.
8.4 Set the frequency
The DND can be set to either Once , On Daily , Weekly , Mon-Friday or Sat-Sun .
1. Press
Menu , scroll to Do Not Disturb and press OK .
2. Scroll to
Frequency and press OK .
3. Scroll to
Once , On Daily , Weekly , Mon-Friday or Sat-Sun and press OK .
4. Press
to return to standby.