Operation Manual

49Settings
3. Scroll to Country Code or Local Code and press OK .
4. Using the keypad, enter the code and press
OK.
5. Press e to return to standby.
14.6.3 Set the auto prex
This feature checks and formats a pre-dialled outgoing number before it is dialled out.
You can set a detect number that can be up to 6 digits, once this number has been set the
phone will check the rst few digits of the any pre-dialled number and if they match the
detect number will replace them with the prex number.
1. Press
Menu , scroll to Settings and press OK .
2. Scroll to
Call Settings and press OK .
3. Scroll to
Auto Prex and press OK .
4. Using the keypad, enter the prex number and press
OK.
5. Press e to return to standby.
14.6.4 Recall mode
Recall is useful to access certain network services and PABX /switchboard services.
The default recall mode preset in the IT.6 is suitable for your country network and therefore
you should not need to change it.
NOTE
The use of the IT.6 cannot be guaranteed on all PABX.
1. Press
Menu , scroll to Settings and press OK .
2. Scroll to
Call Settings and press OK .
3. Scroll to
Recall Mode and press OK .
4. Scroll to
Short , Medium or Long and press OK .
5. Press
e to return to standby.
14.6.5 Dialling mode
The IT.6 is preset to Tone dialling. It is unlikely that you need to change this setting.
1. Press
Menu , scroll to Settings and press OK .
2. Scroll to
Call Settings and press OK .
3. Scroll to
Dialling Mode and press OK .
4. Scroll to
Pulse or Tone and press OK .
5. Press
e to return to standby.