Operation Manual

18 Using the phone
3. Using the phone
3.1 Making a call
3.1.1 Predial
Enter the phone number and then press /FLASH or /SPEAKER to dial the
phone number.
3.1.2 Direct dialing
Press /FLASH or /SPEAKER to get a line and enter the phone number.
3.1.3 Dialing from the phonebook
1. Press and then VOL+ or REDIAL/VOL- to scroll and select the entry
you want to dial.
2. Press /FLASH or /SPEAKER to dial the number.
3.1.4 Dialing from the redial list
1. Press REDIAL/VOL- and then VOL+ or REDIAL/VOL- to scroll and select
an entry you want to redial.
2. Press /FLASH or /SPEAKER to dial the number.
3.1.5 Dialing from the calls list
1. Press CID and then VOL+ or REDIAL/VOL- to select the entry you want to
dial.
2. Toggle the #/ /PAUSE/FORMAT key to format the dialed number.
3. Press /FLASH or /SPEAKER to dial the number.
3.1.6 Dialing from the speed dial location
In idle mode, press and hold a key (1-9) until the speed dial number is displayed
and dialed.
3.2 Muting a call
1. During a call, press MUTE to mute the microphone, so that you can talk to
someone else in the room without your caller hearing you.
2. Press MUTE again to unmute.