Operation Manual

22 Using the phone
3.9 Speed dial
You can store up to 9 numbers in the speed dial locations. Each speed dial
location can have a maximum of 24 digits for the number and 16 characters for
the name. This feature makes it convenient when you want to dial a certain
number more quickly.
3.9.1 Reviewing the entry in a speed dial location
1. Press MENU.
2. Press VOL+ or REDIAL/VOL- to select
PHONEBOOK . Press SELECT, and the
first entry will be displayed on the screen.
3. Press SELECT then VOL+ or REDIAL/VOL- to select
SPEED DIAL .
4. Press SELECT and then VOL+ or REDIAL/VOL- to select the desired
speed dial key from key (1-9).
5. Press SELECT. The screen will show the speed dial entry in the selected
speed dial location.
3.9.2 Storing an entry to a speed dial location
1. Follow steps 1 to 4 in the section Reviewing the entry in a speed dial
location.
2. Press SELECT then VOL+ or REDIAL/VOL- to scroll to the desired entry.
3. Press SELECT to save.
NOTE
If the desired location has stored a speed dial number, when pressing SELECT
in step 2, the screen will display the stored number. If you want to replace it,
press SELECT to select
ADD , then press VOL+ or REDIAL/VOL- to the desired
number, press SELECT again to confirm, and the screen will display “SAVED”
with a confirmation tone.
3.9.3 Dialing the entry from a speed dial location
1. Press /FLASH or /SPEAKER.
2. Press and hold the desired speed dial key location (1-9) to dial the speed
dial number.