Operation Manual

32 Using the phone
3.16 Registration
3.16.1 Registering a handset
Up to 5 handsets can be registered to one base. The original handset is pre-
registered to use. Additional handsets must be registered to the base before you
can use them.
To register an additional handset,
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS .
2. Press SELECT and then VOL+ or REDIAL/VOL- to select
REGISTRATION .
3. Press SELECT and then VOL+ or REDIAL/VOL- to select
YES or NO .
4. Select
YES then press SELECT to enter the registration procedure as
follows:
1. Press and hold FIND for about 4 seconds on the base.
2. Place the unregistered cordless handset on the base or charger.
3. A confirmation tone is generated if registration is successful.
HANDSET X is
displayed where
X denotes the number of handsets, and then the
phone returns to idle.
To register an originally unregistered handset, follow steps 1 through 3 above.
3.17 Resetting all settings
1. Press MENU and then VOL+ or REDIAL/VOL- to select RESET SETTINGS .
2. Press SELECT and then VOL+ or REDIAL/VOL- to select
ALL SETTINGS .
3. Press SELECT to select
YES . All personalized settings will be reset to
default.
NOTE
Your phonebook entries, calls list, and redial list, will remain unchanged.
3.18 Paging/finding a handset
Press FIND on the base. All handsets registered to the base will ring, and the
handset screen will display
FIND HANDSET .
To stop the paging, press FIND again, press any key on the handset, or place the
handset on the base.